Roof bolting in underground mining: a state-of-the-art review

Conclusions With continuing investigations and developments, roof bolting today can in most cases successfully reinforce the mine roof in underground mining. In order to cope with the increasing use of roof bolts, efforts should be made to maximize the safety and minimize the cost. With regard to mechanical bolting, two important parameters need more advanced improvements and study, namely, optimum design of the shape and type of expansion shell and optimum bolt tension for a specific bolt pattern. For the fully grouted resin bolt, the most critical requirement is to develop a fast-setting, low-cost, intoxic, inflammable grouting material that can be used in the high speed mining cycle. It should be noted that geological conditions such as the strata type, rock properties,in situ stress, and planes of weakness play an important role in the successful application of any roof bolting system. These factors should be specified as accurately and quantitatively as possible in the design of any roof bolting system. Finally, proper and careful installation and continuous monitoring are imperative for the success of any roof bolting system.     

Rock moisture content in the field and the laboratory and its relationship to mechanical weathering studies

Rock moisture content is a major control of mechanical weathering, particularly freeze-thaw, and yet almost no data exist from field situations. This study presents moisture content values for rocks, taken from a variety of positions and conditions, in the maritime Antarctic. Additional information regarding the amount of water the rock could take up, as observed from laboratory experiments, is also presented. The results show that the approaches used in simulation experiments, particularly that of soaking a rock for 24 hours, may produce exaggerated results. It was found that the saturation coefficient (S-value) was a good indicator of frost susceptibility (based on water content) but that the derivation of that value may underestimate the potential of some rocks. The distribution of moisture within rocks is seen as an important, but unkown, factor. The results of these field moisture contents suggest that for simulations of freeze-thaw or hydration to be meaningful then they should have rock water contents based on field observations.     

Complex behaviour of a coal sample in a large scalein situ compression test

Summary A large scalein situ compression test of a laminated coal cube is described. The cube was uniformly loaded by a system of hydraulic jacks supplied simultaneously from one pump. At the same time both load and deformations were controlled. Deformations were measured by 60 longitudinal gauges located at the side surface of the cube in the regular net. Due to the heterogeneity of the rock the readings showed scatter. As a first approximation, the scattered data were fitted to the plane using the least square method. Orientations of the planes were analysed and show permanent relative movement between adjacent lamina indicating complex behaviour of the cube under loading. Detailed analysis of this behaviour indicated that the cube was subjected to both bending and twisting.     

浙江青田芝溪头鹤溪群

浙江青田芝溪头的鹤溪群大理岩中，首次发现化石（介形类、鱼骨等），同时根据同位素年龄值，确认原来认为元古代结晶基底的鹤溪群为二叠纪沉积，其中的石墨为煤层的变质产物，并可大致与福建童子岩组对比，为浙江煤田的预测指出了新的方向。     

三山岛金矿矿柱的稳定分析

本文基于三山岛金矿工程地质条件，针对设计所提出的采场和矿柱的尺寸，提出了分析矿柱稳定性的一种新的方法，并应用该方法分析了矿柱的稳定性；同时，提出了提高矿柱承载能力的一种有效途径。另外，还详细讨论了矿柱顶点的深度与长度之间存在的关系。     

岩体水力学概述

本文通过伙在工程活动与地质环境相互作用分析，揭示了人类工程、岩体与地下水之间的关系；论述了岩体水力学的研究对象，学科地位，研究内容以及研究方法。     

浙东南碰撞造山带的岩石磁组构及其构造意义

对浙江东南碰撞造山带龙泉等地的岩石磁组构测试，显示了普遍具优势取向的最小磁化率主轴方向，由此所揭示的ＮＷ－ＳＥ方向的主压应力与侏罗纪以后该地区的推覆构造所揭示的主压应力方向一致．结合已发表的邻近地区的古地磁、同位素年龄等资料，认为该地区应属中生代碰撞造山带，龙泉群的变质年龄也与此相当．     

节理岩体断裂的分形机理研究

本文在考察了节理化岩体的断裂力学特征的基础上，结合现代分形几何原理，建立起追踪裂纹裂分形模型，对不连续岩体的断裂韧性的分形效应进行了深入研究，并通过压剪试验得到难。     

Identification of strength equilibrium rock slopes: Further statistical considerations

Strength equilibrium slopes are rock slopes whose gradient θ and rock mass strength (RMS) are in adjustment. The identification of such slopes depends on the accurate specification of the strength equilibrium envelope. Previous attempts to delimit the envelope are reviewed and modifications are proposed that permit its more rigorous statistical definition. Because θ can be measured much more reliably than RMS, the structural relation between these variables is estimated by regressing RMS on θ, and the strength equilibrium envelope is defined by the 95 per cent confidence limits. The analysis is performed on a data set of 268 rock slopes, representing all the data on RMS and θ hitherto employed in published studies of strength equilibrium slopes.