高能级强夯法处理深厚吹填砂土地基现场试验

沿海吹填砂土地基地下水位较高、常含软土夹层,地基处理难度大。为了研究高能级强夯在这类吹填砂土地基上的加固效果,在山东沿海某吹填砂土场地开展6 000和8 000 kN·m能级强夯加固试验。试验结束后分别运用标准贯入试验、静力触探试验、平板载荷试验进行现场检测。通过对比分析了设计要求深度范围内标准贯入试验和静力触探试验,发现夯前夯后标准贯入试验击数和静力触探锥尖试验阻力均明显提升,有效消除了饱和砂土和饱和粉土的液化势;通过平板载荷试验p-s曲线及夯后静力触探锥尖阻力标准值与承载力特征值的关系式,得到夯后砂土地基承载力特征值≥120 kPa,验证了高能级强夯方案的可行性。其次,对软土夹层位置和地下水位高度展开研究,发现软土层会阻碍夯击能传递,减小强夯有效加固深度,且软土层位置不同对强夯加固效果影响程度不同,强夯影响临界范围处存在软土层时,有效加固深度为软土层顶部位置处;对砂土地基进行4 000 kN·m能级强夯试验时,发现未降水强夯后有效加固深度为5 m,降水至地面以下3 m强夯后有效加固深度达到了7 m,提高了加固效果。在高能级强夯研究基础上,对现场吹填砂土地基进行了75万m²的大面积高能级强夯施工,发现处理后地基能够满足建筑用地要求。     

Froude supercritical flow bedforms in deepwater slope channels? Field examples in conglomerates,sandstones and fine‐grained deposits

Active margin continental slope outcrops from the Eocene Juncal Formation, the Eocene La Jolla Group and the Miocene Capistrano Formation display sedimentary structures and depositional geometries that suggest deposition from Froude supercritical flow, based on comparison to strata produced by flume experiments. These deposits range from boulder‐size soft clasts and cobble‐size hard clasts to silt and mud, and display long‐wavelength and low‐amplitude convex‐up and concave‐up geometries that range from centimetre to hundreds of metres scale, low‐angle foresets and backsets, and common internal and bounding erosion surfaces from centimetres to tens of metres in depth. In places, planar laminations, structureless beds and normally graded beds are laterally or vertically associated with such structures. In other places, consistent backsets or deep and steep‐sided scours occur. This study aimed to discuss the origin of the observed bedforms, contributed to recognition of supercritical flow deposits on continental slopes and expanded the outcrop examples of supercritical flow deposits to silt and mud. This work implies that the erosive and powerful Froude supercritical flow turbidity currents may have a substantial impact on erosional and depositional dynamics on deepwater slopes, especially on active margins due to the steep gradients and high sediment supply.     

MapGIS区文件自动分类填色的快速实现

针对MapGIS软件在拓扑造区中随机填色而导致图件符号化操作烦琐且极易出错的问题,本文在深入分析MapGIS区明码文件逻辑结构的基础上,运用Excel强大的数据编辑处理功能,提出了快速给区块分类填色的简易方法,并结合土地利用现状图数据进行了实验。结果表明,该方法操作简单,易实现,能够快速地解决一些常见的实际问题。     

Experimental study of the seismic behavior of partially concrete‐filled steel bridge piers under bidirectional dynamic loading

The seismic behavior of steel bridge piers partially filled with concrete under actual earthquake conditions was investigated by using 20 square section specimens subjected to static cyclic loading tests and single‐directional and bidirectional hybrid loading tests. Acceleration records of two horizontal NS and EW directional components for hard (GT1), medium (GT2), and soft grounds (GT3), obtained during the 1995 Kobe earthquake, were adopted in dynamic tests. Experimental results clearly showed that maximum and residual displacements under actual earthquake conditions cannot be accurately estimated by conventional single‐directional loading tests, especially for GT2 and GT3. A modified admissible displacement was proposed on the basis of bidirectional loading test results. The concrete fill can effectively improve the seismic resistance performance if the concrete inside the steel bridge piers is sufficiently high in quantity. Copyright © 2013 John Wiley & Sons, Ltd.     

对某钢厂建设中边坡支护问题的研究

利用修整斜山坡场地的边坡支护的实践经验,研究了扶壁式＋预应力锚杆挡墙、板式锚杆挡墙、格构式锚杆挡墙和岩石锚喷支护方式在边坡支护中的应用,可为以后类似工程的设计与施工提供参考依据。     

井场边坡稳定性评价及工程处治方案

乐山市境内某井场平整形成填方边坡.边坡坡脚井场污水池开挖中,临空面和边坡支挡工程均出现变形破坏.根据变形破坏的分布规律,从场地地形、建筑物分布、边坡特征和原始坡体物质结构方面,分析该边坡变形机理,评价其稳定性影响因素.并采用极限平衡法对边坡的稳定性及下滑推力进行计算.在此基础上,针对性地提出该边坡的工程处治方案,保证后期井场及污水池的作业安全.     

新型快速锚固锚索的研发及应用

介绍了直立高填方区边坡治理工程中应用的一种新型的快速锚固技术———预应力混凝土管水平向快速锚固锚索的研发过程,阐述了其力学原理及其构造、特性,并结合工程实例,介绍了新型快速锚固锚索的实施过程及技术要点。     

化学方法改良吹填土固结沉降性质研究

大连市大窑湾港区的吹填土为高分散性低液限粉质黏土,其特点是亲水性高,含水量大,排水率低,这造成了吹填土承载力低,在荷载作用下变形量大,在很长一段时间内无法作为正常建筑地基使用.通过在盐水环境下添加不同剂量的浓度为0.1%的絮凝剂Praestol-2515或Praestol-650溶液,可以观察到土颗粒迅速聚合,土粒粒径明显增大,粒间胶结更加均匀和紧密,形成絮状物,从而促进了土颗粒与自由水分的分离,导致过饱和吹填土（悬浊液）沉降速度大大提高,极大地缩短了吹填土的排水固结时间,在短期内达到建筑地基所需要的变形量和承载能力.研究结果对于沿海地区过饱和吹填土的造陆工程,以及类似的高含水率黏性土的地基处理具有重要的启示意义.     

GEOMORPHIC AND STRATIGRAPHIC COMPLEXITY: HOLOCENE ALLUVIAL HISTORY OF UPPER WOLLOMBI BROOK, AUSTRALIA

Holocene and post‐European settlement alluvial histories of three nested drainage basins were reconstructed from detailed litho‐ and chronostratigraphy of cut and fill terraces and flood‐plains in the upper Wollombi Brook catchment. Fernances Creek (13.8 km²) valley fill consisted of intercalated thin mud sheets deposited in ephemeral swamps and thick sand sheets deposited by discontinuous channels. Dairy Arm (39.8 km²) valley fill was more complex, with inset alluvial fills in the upper basin and overlapping vertically stacked fills in the lower basin. However, correlative lithostrati‐graphic units were not found on all tributaries. Furthermore, basal radiocarbon dates on the last inset fill of four tributaries did not overlap, allowing for plus or minus twice the standard deviation of the reported ages. Wollombi Brook (341 km²) valley fill was also complex, with longitudinally discontinuous units, most of which were not found in the two tributaries. Upstream late Holocene channel incision was coeval with downstream chain of ponds because sediment generated by incision was stored in the intervening valley. Historical channel incision occurred between 1838 and 1867 on Fernances Creek at a locally steeper section of valley floor during the period of peak population and frequent floods immediately after a road crossing was constructed, but coincided with a catastrophic flood on Dairy Arm (June 1949) and on Wollombi Brook (1927). Lack of correlative litho‐ and chronostrati‐graphic units plus out‐of‐phase post‐European incision indicate that stratigraphic complexity is a function of geomorphic complexity due to the operation of geomorphic thresholds and complex response.     

Biogrouting of hydraulic fill fine sands for reclamation projects

ABSTRACT

Biogrouting, which is a new method for soil improvement, was used in an attempt to cement a type of hydraulic fill fine sands (called black sands) in reclamation projects in Tianjin, China, to form a working layer for mechanical equipment. Several factors influencing biogrouting with regard to cementing solution, including injection frequency, reaction time, concentration, and flow rate, were controlled to prepare black sand columns. This paper reports on an investigation of bacterial fixation, calcium ion utilization, and calcium carbonate distributions of biogrouted sand specimens. At the end of the tests, the geotechnical performances of the sand specimens were determined. The results showed that the biogrouting method effectively solidified black sands, by increasing the unconfined compressive strength of a sand column to 1.91?MPa and reducing the permeability coefficient by three orders of magnitude. A relationship between the unconfined compressive strengths and calcium carbonate contents was put forward, in addition to a relationship between the permeability coefficients and the calcium carbonate contents. According to the experimental results, some reasonable suggestions regarding the application of biogrouting to the consolidation of hydraulic fill fine sands in reclamation projects were proposed.