一种利用测井资料预测岩石可钻性的计算机方法

介绍了一种利用测井资料快速求得岩石可钻性级值的计算机方法。该方法能够比较准确地预测岩石可钻性，快速做出连续的地层可钻性剖面图。室内微钻头可钻性试验和江汉油田现场应用验证表明：该系统具有比较高的可靠性，是可以投入油田现场应用的。     

HJ-1复合型钻井液的研究及应用

分析和探讨了HJ-1复合型钻井液对复杂地层护壁的作用机理及护壁性能试验情况，介绍了其在寨上矿区复杂地层钻探中的成功应用。     

Microcrack networks in granite affected by a fault zone: Visualization by confocal laser scanning microscopy

Microcracks in the Cretaceous Ryoke-type granite in Japan were investigated by using deep drilling core samples collected in the Mizunami Underground Research Project of the Japan Nuclear Cycle Development Institute (JNC). The granite body suffered brittle deformation associated with Tertiary thrust movement. Based on core-scale and microscopic deformation features, the drill core from a depth of 300 to 700 m is divided into four domains, i.e. (A) undeformed granite, (B) granite intruded by cataclastic seams, (C) fractured granite in the fault damage zone, and (D) foliated cataclasite at the fault center. To characterize microcrack geometries in each domain, we employed the impregnation method using a low-viscous acrylic resin doped with fluorescent agents and captured the microcrack images by confocal laser scanning microscopy (CLSM). The CLSM image in the fault damage zone revealed anisotropic development of microcrack networks related to the fault movement. Both CLSM observation and porosity measurements reveal a drastic increase of micro-pores in the foliated cataclasite, possibly caused by fragmentation, and granulation and crack sealing in the fault zone.     

旋挖钻进中硬岩及卵砾层钻头结构及施工工艺研究

旋挖钻进技术作为一种高效优质的钻进方法近年来广泛地被用于公路、铁路及大型水电站基础工程施工建设中，取得了良好的社会效益和经济效益。探讨了在卵砾石、漂石等复杂地层以及坚硬基岩中进行旋挖钻进所用钻头的结构及其施工工艺。     

岩土钻掘设备的液压步履机构

因液压步履移位最方便，辅助时间短，换向灵活，移位对孔准确，大型岩土钻掘设备施工的群孔现场实现近距离的自行迁移多采用液压步履机构。详细叙述了双向移动和单向移动加转向步履机构的结构和特点。     

新型充气钻井液在新疆严重漏失地层的应用

利用特殊植物纤维KWS作为泥浆处理剂的新型充气钻井液，不仅具有常规充气钻井液低密度、排粉能力强、节约用水等优点，还可以不受钠、钙离子的影响，提高钻井泡沫稳定性和钻井液抗盐能力。通过采用此种新型充气钻井液，利用其低密度特性、特殊泥饼、泡沫的群体封堵作用和泡沫的疏水屏蔽作用，成功解决了裂隙地层的漏失问题，恢复了钻探生产。在我国西部干旱缺水漏失地区具有良好的应用前景。     

液体高膨胀材料充填堵漏试验应用

介绍了钻探施工中，利用膨胀材料充填、堵漏的新工艺，其具有经济、高效、安全的特点。     

Application on drilling parameter monitor in drilling engineering monitoring

The drilling parameter monitor is an important tool in drilling engineering applied to monitoring drilling process, carrying out scientific analysis and decision-making. Based on discussing the present development situation of the domestic and foreign drilling machine parameter monitors, the metering scheme for vehicle-loaded drilling parameter monitor was designed. By using detection system for MSP430 single-chip microcomputer (SCM) in combination with peripheral circuit such as sensors, the drilling-rig control system was obtained to detect, and for every parameter in real-time display in order to keep operating the drilling rig status. The experiment shows that the drilling parameter monitor reaches design requirements and can be applied to drilling engineering monitoring, which has characters such as simple structure, high credibility and low cost.     

Repacking practice for G-3 engineering driller power unit with drive shaft of dual channel reverse circulation

In order to satisfy operating requirements for constant core drilling technology in reverse circulation with hollow-through DTH,the power unit of G-3 engineering driller was ameliorated. The new one with dual channel drive shaft, achieved the perfect assemble with transmission structure of the original power unit. It could interconvert according to need by using two sets of drive shafts with direct and reverse circulation. The repacked G-3 engineering driller carried on experiment in the field test in Luanchuan molybdenum mine of Henan, whose effect was very good.     

含水采空区全空间瞬变电磁响应分析

针对含水采空区全空间瞬变电磁响应信号识别问题,采用有限元数值模拟及现场实测方法,基于电动势—视电阻率及对应时深转换关系,获取了全扇面视电阻率随深度变化的空间分布规律,提取了低阻异常区测点感应电动势衰减曲线,得出了测点随探测角度变化的电动势量化变化规律.基于上述研究,开展了井下钻探验证及钻孔窥视,并对现场钻孔出水水样进行...