Study on effects of damping in laminated rubber bearings on seismic responses for a ⅛ scale isolated test structure

The effects of damping in various laminated rubber bearings (LRB) on the seismic response of a ?‐scale isolated test structure are investigated by shaking table tests and seismic response analyses. A series of shaking table tests of the structure were performed for a fixed base design and for a base isolation design. Two different types of LRB were used: natural rubber bearings (NRB) and lead rubber bearings (LLRB). Three different designs for the LLRB were tested; each design had a different diameter of lead plug, and thus, different damping values. Artificial time histories of peak ground acceleration 0.4g were used in both the tests and the analyses. In both shaking table tests and analyses, as expected, the acceleration responses of the seismically isolated test structure were considerably reduced. However, the shear displacement at the isolators was increased. To reduce the shear displacement in the isolators, the diameter of the lead plug in the LLRB had to be enlarged to increase isolator damping by more than 24%. This caused the isolator stiffness to increase, and resulted in amplifying the floor acceleration response spectra of the isolated test structure in the higher frequency ranges with a monotonic reduction of isolator shear displacement. Copyright © 2002 John Wiley & Sons, Ltd.     

Numerical Analysis of Space–Time Finite Element Formulations for Miscible Displacements

A finite element formulation is proposed to approximate a nonlinear system of partial differential equations, composed by an elliptic subsystem for the pressure–velocity and a transport equation (convection–diffusion) for the concentration, which models the incompressible miscible displacement of one fluid by another in a rigid porous media. The pressure is approximated by the classical Galerkin method and the velocity is calculated by a post-processing technique. Then, the concentration is obtained by a Galerkin/least-squares space–time (GLS/ST) finite element method. A numerical analysis is developed for the concentration approximation. Then, stability, convergence and numerical results are presented confirming the a priori error estimates.     

震源时间函数与震源破裂过程

简要介绍了现代数字地震学的两个重要概念。一个是震源时间函数，另一个是地震震源的时空破裂过程。首先，从地震断层位移表示定量出发，介绍震源时间函数和震源破裂过程的基本概念。然后，分别介绍两种从远场地震记录中提取震源时间函数和获取有限断层面上时空破裂过程图像的反演方法。     

Most likely locations of large earthquakes in the Kanto and Tokai areas, Japan, based on the local recurrence times

We examined the hypothesis that minima in local recurrence time, T_L, or equivalently maxima in local probability, P_L, may map asperities in the Kanto and Tokai areas of Japan, where the earthquake catalog of the National Research Institute for Earth Science and Disaster Prevention (NIED) is complete at the M=1.5 (M1.5) level. We mapped T_L (P_L) based on the a- and b-values of the nearest earthquakes within 20 km of every node of a grid spaced 0.01° for M7 target events. Only earthquakes within the top 33 km were used. The b-values increase strongly with depth, in several areas. Therefore, some of the T_L (P_L) anomalies are not revealed if data from the entire crustal seismogenic zone are mixed. Thus, we mapped T_L (P_L) separately for the top 15 km and the rest of the depth range, as well as for the entire seismogenic crust. The resulting T_L- and P_L-maps show that approximately 12% of the total area shows anomalously short recurrence times. Out of six shallow target events with M≥6.5 and which occurred since 1890, five are located within the anomalous areas with T_L <450 years. We interpret this to mean that areas with anomalously short T_L map asperities, which are more likely than other areas to generate future target events. The probability that this result is due to chance is vanishingly small. The great Kanto rupture of 1923 appears to have initiated in the most significant asperity we mapped in the study area. One anomaly is located in the northeastern part of the area of the proposed future rupture of the Tokai earthquake, and another one at its southwestern corner. The absolute values of T_L calculated are uncertain because they depend on the size of the volume used for the calculation.     

Nonlinear earthquake response analysis and energy calculation for seismic slit shear wall structures

Based on the concept of structural passive control, a new type of slit shear wall, with improved seismic performance when compared to an ordinary solid shear wall, was proposed by the authors in 1996. The idea has been verified by a series of pseudo-static and dynamic tests. In this paper a macro numerical model is developed for the wall element and the energy dissipation device. Then, nonlinear time history analysis is carried out for a 10-story slit shear wall model tested on a shaking table. Furthermore, the seismic input energy and the individual energy dissipated by the components are calculated by a method based on Newmark-β assumptions for this shear wall model, and the advantages of this shear wall are further demonstrated by the calculation results from the viewpoint of energy. Finally, according to the seismic damage criterion on the basis of plastic accumulative energy and maximum response, the optimal analysis is carried out to select design parameters for the energy dissipation device.     

DAS24-3B数据采集系统采集控制模块的工作原理

DAS24-3B是中国科学院地质与地球物理研究所研制的宽频带地震数据采集系统。采集控制模块是该系统的重要组成部分。本文阐述了控制模块的工作原理，介绍了DAS24-3B系统的基本组成和采集器工作过程，并给出该系统如何与笔记本端应用程序界面通讯和联络的操作建议，使该系统能够在工作中发挥更大的作用。     

连续小波变换在新疆地震活动周期分析中的应用

利用连续小波变换分析和研究了 1 970年 1月— 2 0 0 1年 1 2月新疆地区 30年来的地震活动情况。结果表明 ,新疆地震活动存在比较稳定的 1 0年左右活动周期 ,并存在 5年和 1 7年左右的不稳定的准活动周期 ,也就是说新疆地区地震活动既存在比较稳定的优势周期 ,也存在一定的时变性。根据 MS≥ 4.7地震时间序列的连续小波变换结果可推测 ,2 0 0 2— 2 0 0 5年新疆地区地震活动相对偏弱 ,中、强地震的发生次数偏少 ,有可能发生 5级或 6级地震 ,而到 2 0 0 6— 2 0 0 7年新疆有可能再次发生 7级左右的大地震。     

位移监测在滑坡时空运动研究中的应用

滑坡时空运动特征是滑坡地质体在内因和外因共同作用下，自一种状态向另一种状态转化的地质过程。滑坡位移监测是研究滑坡变形影响因素、动态规律及预测预报的主要途径，特别是滑坡深部位移监测，又为研究滑坡体的时空运动过程提供了重要信息。本文结合几个滑坡的深部位移监测实践，综合分析位移监测信息，研究滑坡体的时空运动特征及发展趋势，为滑坡时空运动系统研究及稳定性预测提供依据。     

中国大陆科学钻探钻探子工程钻进实时记录网页的开发

以中国大陆科学钻探实时记录网页的开发为例，介绍了在开发网络数据库时，利用Excel组件作输入界面，实现查询界面上表格的表头和表尾不动、而中间行可以滚动，实现回次滚动查询和界面实时刷新。