区域地质灾害危害程度等级划分探讨

区域性地质灾害危害程度等级尚无比较科学的划分方法。通过福建省区域地质灾害危害程度等级划分的探讨,采用单位面积地质灾害造成的人员死亡数、财产损失值作为“地质灾害模数”,对区域地质灾害危害程度等级进行划分,判别不同区域地质灾害严重程度,为区域地质灾害防治决策提供科学依据。     

Bringing GPS into harsh environments for fully automated deformation monitoring

Engineering projects that require deformation monitoring frequently utilize geodetic sensors to measure displacements of target points located in the deformation zone. In situations where control stations and targets are separated by a kilometer or more, GPS can offer higher precision position updates at more frequent intervals than can normally be achieved using total station technology. For large-scale deformation projects requiring the highest precision, it is therefore advisable to use a combination of the two sensors. In response to the need for high precision, continuous GPS position updates in harsh deformation monitoring environments, a software has been developed that employs triple-differenced carrier-phase measurements in a delayed-state Kalman filter. Two data sets were analyzed to test the capabilities of the software. In the first test, a GPS antenna was displaced using a translation stage to mimic slow deformation. In the second test, data collected at a large open pit mine were processed. It was shown that the delayed-state Kalman filter developed could detect millimeter-level displacements of a GPS antenna. The actual precision attained depends upon the amount of process noise infused at each epoch to accommodate the antenna displacements. Higher process noise values result in quicker detection times, but at the same time increase the noise in the solutions. A slow, 25 mm displacement was detected within 30 min of the full displacement with sigma values in E, N and U of ±10 mm or better. The same displacement could also be detected in less than 5 h with sigma values in E, N and U of ±5 mm or better. The software works best for detecting long period deformations (e.g., 20 mm per day or less) for which sigma values of 1–2 mm are attained in all three solution components. It was also shown that the triple-differenced carrier-phase observation can be used to significantly reduce the effects of residual tropospheric delay that would normally plague double-differenced observations in harsh GPS environments.

地铁隧道结构变形监测信息管理系统的开发

地铁隧道结构变形监测的特殊性、周期性和长期性,使其信息量非常庞大.信息管理是地铁隧道结构变形监测中一项重要的工作,现有的管理方式效率很低.为了高效、准确地管理监测信息,及时分析预报地铁隧道结构的稳定状况,本文结合南京地铁运营期隧道结构变形监测实例,开发了一套具有变形监测资料存储、预处理、管理分析、可视化分析、预测预报及限值预警等功能的信息管理系统,保证了准确及时快速的数据处理和信息反馈,具有良好的运用和推广前景.     

A novel strategy using biodegradable EDDS for the chemically enhanced phytoextraction of soils contaminated with heavy metals

For the sake of cost and potential environmental risk, it is necessary to minimize the amount of chelates used in chemically-enhanced phytoextraction. In the present study, a biodegradable chelating agent, EDDS was added in a hot solution at 90℃ to the soil in which garland chrysanthemum （Chrysanthemum coronarium L.） and beans （Phaseolus vulgaris L., white bean） were growing. The application of hot chelate solutions was much more efficient than the application of normal chelate solutions （25℃） in improving the uptake of heavy metals by plants. When 1 mmol kg1 of EDDS as a hot solution was applied to soil, the concentrations ofCu, Zn and Cd and the total phytoextraction by the shoots of the two plant species exceeded or approximated those in the shoots of plants treated with 5 mmol kg^-1 of normal EDTA solution. The concentrations of metals in the shoots of beans were significantly correlated with the relative electrolyte leakage rate of root cells, indicating that the root damage resulting from the hot solution might play an important role in the process of chelate-enhanced metal uptake. The soil leaching study demonstrated that decreasing the dosage of chelate resulted in decreased concentrations of soluble metals in soils. On the 28th day following the application of chelate, the concentrations of soluble metals in the EDDS treated soil were not significantly different from the concentrations in the control soil to which chelates had not been applied.     

福建省滨海火电厂地质灾害问题及风险控制探讨

滨海火力发电厂工程主要包括厂区建筑、码头、管道、取排水、填海和贮灰场等工程。其主要面临着福建省海岸带构造运动、断裂及地震活动、港湾淤积、海底滑坡、软土地基、海底活动地貌、基岩不均匀风化以及人类工程活动等主要的灾害性地质因素。通过对这些因素潜在的致灾特点分析，提出了滨海火电厂地质灾害风险控制应包括选址阶段地质灾害风险回避、设计施工阶段地质灾害风险处理及运行阶段地质灾害风险监控等3方面。地质灾害风险评估是滨海火电厂地质灾害风险控制的首要任务。针对滨海电厂工程的特点，评估内容应着重于地质灾害危险性评估及易损性评估。选址阶段地质灾害风险回避主要是对构造不稳定的回避。地质灾害风险处理主要是电厂工程的基础处理及管道抗冲刷处理。电厂运行阶段地质灾害风险监控主要是对建筑物基础稳定性及海域冲淤变化的监控。     

Behaviour of a rupture of the 21 June 2000 earthquake in South Iceland as revealed in an asphalted car park

A major earthquake (M=6.6) occurred on 21 June 2000, in South Iceland. This paper presents an unusual example of left-lateral strike-slip displacement recorded in a newly asphalted car park surface through a mechanically consistent pattern of open fissures and pressure ridges resulting from simple shear and rotation. Measurement of these features allows accurate reconstruction of the local deformation. The behaviour of the asphalt layer resembles that of analogue physical models, especially in terms of rotations induced by shear deformation. It is finally shown that through a wide range of scales some basic patterns associating rotation and opposite senses of strike-slip exist in the South Iceland Seismic Zone.     

Crack damage stress as a composite function of porosity and elastic matrix stiffness in dolomites and limestones

Twenty-five uniaxial compression tests were performed to determine stress at onset of dilation, referred to herein as “the crack damage stress,” in heterogeneous dolomites and limestones. A simplified model for crack damage stress (σ_cd) is developed here using porosity, elastic modulus, Poisson's ratio and three empirical coefficients. The model shows that when porosity decreases and elastic modulus increases, σ_cd rapidly increases and approaches its maximum value. On the other hand, when porosity increases and elastic modulus decreases, σ_cd rapidly decreases and approaches its minimum value. The proposed model is validated for six heterogeneous limestone and dolomite formations which are widely distributed in Israel.     

数字化形变资料分析处理流程

根据形变数字化数据和前兆特征。主要对EIS000中提供的数据处理及异常判定方法进行了使用分析。针对固体潮成分和非固体潮成分。提出了在日常分析和会商中较为适用的方法和步骤。     

液化场地桩-土-桥梁结构动力相互作用振动台试验研究进展

本文在全面归纳与总结液化场地桩－土－桥梁结构动力相互作用振动台试验及与之相关领域的国内外研究进展基础上，直接针对我国桥梁工程中的主要震害问题，提出在我国开展液化场地桩－土－桥梁结构动力相互作用振动台试验研究的必要性，并阐述作者对液化场地桩－土－张桥梁结构动力相互作用振动台试验中若干问题的认识。     

Nonlinear earthquake response analysis and energy calculation for seismic slit shear wall structures

Based on the concept of structural passive control, a new type of slit shear wall, with improved seismic performance when compared to an ordinary solid shear wall, was proposed by the authors in 1996. The idea has been verified by a series of pseudo-static and dynamic tests. In this paper a macro numerical model is developed for the wall element and the energy dissipation device. Then, nonlinear time history analysis is carried out for a 10-story slit shear wall model tested on a shaking table. Furthermore, the seismic input energy and the individual energy dissipated by the components are calculated by a method based on Newmark-β assumptions for this shear wall model, and the advantages of this shear wall are further demonstrated by the calculation results from the viewpoint of energy. Finally, according to the seismic damage criterion on the basis of plastic accumulative energy and maximum response, the optimal analysis is carried out to select design parameters for the energy dissipation device.