Diagenesis, palaeoclimate and tectono-sedimentary influences on clay mineralogy and stable isotopes from Upper Cretaceous marine successions of the Basque-Cantabrian Basin (N Spain)

Clay mineralogy and whole-rock stable isotopes (δ¹⁸O and δ¹³C) of Upper Cretaceous marly sediments on the Basque-Cantabrian Basin have been integrated to determine the main effects of diagenesis, palaeoclimate and tectono-sedimentary factors in sections belonging to deep- (Barrika) and platform-marine (Isla de Castro, Villamartín and Olazagutía) settings.The mean values for the clay assemblages and δ¹⁸O exhibit notable differences among the sections, partially explainable by the influence of diagenesis. The Barrika sediments, with more diagenetically advanced illite-smectite (I-S) mixed-layer (R1, 70% illite), authigenic chlorite, and low δ¹⁸O (−4.05‰ PDB), experienced higher diagenetic grade than Isla de Castro and Olazagutía, which have R0 I-S (20% illite) and heavier δ¹⁸O. Villamartín was also affected by higher diagenesis than Isla de Castro and Olazagutía, given the occurrence of R1 I-S (60% illite) and low δ¹⁸O (−4.11‰ PDB). However, the absence of other clays in Villamartín (e.g. authigenic chlorite) is indicative of less diagenetic grade than Barrika. These results show the useful integration of clay mineralogy and stable isotopes to detect different diagenetic grades in distinct marine successions of the same basin.Despite being influenced by diagenesis, the clay mineralogy partially preserves its inherited signature. This allows detection of major contents of I-S and mica, and minor kaolinite, interpreted as indicative of warm palaeoclimatic conditions. High kaolinite content in Villamartín and absence of kaolinite in Isla de Castro, though, are considered to be a product of neither diagenesis nor palaeoclimatic influences. Instead, tectono-sedimentary causes, related to unsuitable conditions for clay formation and transport from the local source areas, contributed to original clay differences. The inferred effects of diagenesis, palaeoclimate and tectono-sedimentary factors make this work important to show the potentially great variety of controls on the clay mineralogy of marine sections, which are often uncritically treated in studies concerning the Late Cretaceous.     

Belemnites from the lower middle Cenomanian of Hoppenstedt, northern Germany: significance and integrated correlation

The belemnite species Praeactinocamax primus (Arkhangelsky, 1912) and Belemnocamax boweri Crick, 1910 are described from the Cenomanian of the abandoned limestone quarry section of Hoppenstedt (Sachsen-Anhalt, northern Germany). They co-occur in the upper part of a prominent tripartite bioclastic limestone bed associated with the ammonite Acanthoceras rhotomagense, indicating the primus Event of the lower middle Cenomanian A. rhotomagense ammonite Zone. An integrated stratigraphical calibration including carbon stable isotope correlation to southern England suggests that the belemnite event horizon at Hoppenstedt occupies exactly the same chronostratigraphical position as elsewhere, highlighting the strictly isochronous character of the primus Event across northwestern Europe. Furthermore, stratigraphical gaps in the Hoppenstedt succession are evaluated.     

The WRF model performance for the simulation of heavy precipitating events over Ahmedabad during August 2006

The summer monsoon season of the year 2006 was highlighted by an unprecedented number of monsoon lows over the central and the western parts of India, particularly giving widespread rainfall over Gujarat and Rajasthan. Ahmedabad had received 540.2mm of rainfall in the month of August 2006 against the climatological mean of 219.8mm. The two spells of very heavy rainfall of 108.4mm and 97.7mm were recorded on 8 and 12 August 2006 respectively. Due to meteorological complexities involved in replicating the rainfall occurrences over a region, the Weather Research and Forecast (WRF-ARW version) modeling system with two different cumulus schemes in a nested configuration is chosen for simulating these events. The spatial distributions of large-scale circulation and moisture fields have been simulated reasonably well in this model, though there are some spatial biases in the simulated rainfall pattern. The rainfall amount over Ahmedabad has been underestimated by both the cumulus parameterization schemes. The quantitative validation of the simulated rainfall is done by calculating the categorical skill scores like frequency bias, threat scores (TS) and equitable threat scores (ETS). In this case the KF scheme has outperformed the GD scheme for the low precipitation threshold.     

欧盟RoHS指令与中国的对策

对欧盟RoHS指令的主要内容进行了简述,初步介绍了与RoHS指令相似或者相关的各国的环保指令,讨论了RoHS指令等对我国电子电气行业带来的巨大冲击。简要总结我国电子信息产业部、国家质量监督检验检疫总局、商务部等各管理及技术部门为了应对RoHS指令和提高我国电子电气行业竞争力而作出的相应对策。     

Geomorphological hazards related to deep dissolution phenomena in the Western Italian Alps: Distribution, assessment and interaction with human activities

Deep dissolution affects great part of soluble rocks (e.g. gypsum and anhydrite) of the Western Italian Alps. The related superficial phenomena (sinkholes, gravity-induced processes and a local worsening of geomechanical rock properties) are not limited to typical karsts landscape and cause slope instability also affecting populated sites and infrastructures. The paper aims to describe general characteristic of dissolution phenomena, to interpret their conditioning factors and evolutionary stages and to assess possible hazards due to their superficial effects.The search for evidences of deep dissolution leads to the selection of representative sites in the central part of the Western Italian Alps (Piemonte and Valle d'Aosta Region). Detailed geological and geomorphological studies have been used to classify the selected sites by type, size and variable state of activity. Very different evolutionary stages of dissolution phenomena have been interpreted by comparison of case-studies: some are early “embryonic”; others are more evolved, up to typical sinkholes, or even remodelled by other phenomena. Some cases show an extreme complexity in the interactions between corrosion phenomena and other geomorphic processes: slope deformations, from one side, and karst, fluvial and glacial phenomena, to the other. A wide range of movement rates on slope instabilities induced by deep dissolution have been estimated by topographic and geomorphic data. Geochemical data on removed rocks by dissolution indicate 0.4 mm/year values for local subsidence. Historical and technical data indicate low frequency of major dissolution-induced collapses, but highlight widespread damages to tunnels, roads and buildings, especially along slopes.     

Water and power networks and urban fragmentation in Los Angeles: Rethinking assumed mechanisms

Los Angeles is often described as the epitome of urban fragmentation, a notion which in this context is frequently connected to, or even conflated with urban sprawl. At the same time, the city features integrated water and power networks which have been under public ownership for over 70 years. We thus have an apparent paradox in the context of the debate on ‘splintering urbanism’, between socio-spatial fragmentation and the integration of networks. In discussing the idea that deregulation of infrastructural networks exacerbates urban fragmentation, the authors use the case of Los Angeles in order to highlight the central role of private interests in management decisions concerning infrastructure networks. The authors carry out their analysis in an historical perspective, revealing that network integration and universal access can often serve private interests more than the public good. Urban fragmentation in Los Angeles, they conclude, is the result of a complex process of instrumentalisation of network development and management.     

GMOs and their contexts: A comparison of potential and actual performance of GM crops in a local agricultural setting

In this paper, I argue that genetically modified organisms (GMOs) have inherent potential to contribute to socially and environmentally sustainable agriculture by virtue of their ‘biological embeddedness’. Their actual ‘performance’ and how this contributes to sustainability depends on the ‘mutual shaping’ of technology and context. While much attention has been given to the design context of GMOs, this paper considers the influence of the application context and of users. A case study investigating the use of insect-resistant and herbicide-tolerant GM cotton in the cotton-growing region of New South Wales in Australia is presented. The study was based on focus groups with farmers and other stakeholders in a cotton-growing community. It demonstrated a range of direct and indirect effects of GM cotton use, both positive and negative for sustainability, and the ways in which these effects were influenced by the local social context. The influences of the biotechnology industry context, in limiting the contributions that gene technologies can make to sustainability, were also considered, and remedies suggested. I argue that the polarity of the GM debate is hindering progress on these issues, and that a more balanced approach to our analysis of GMOs is necessary in order to fully understand, and to influence, their role in the future of rural spaces.     

Weibull statistical analysis of granite bending strength

Summary  This paper describes and discusses the adequacy of Weibull statistical analysis to analyse the bending strength of granite. The experimental results show that strength variability is related with a specific origin of failure. This conclusion is based on analysing the influence of the surface condition (extrinsic defects) on the bending strength results treated by the Weibull statistics. The conclusions drawn from this study have been validated by analysing the results of the critical flaw dimension estimated by applying the linear elastic fracture mechanics (LEFM) formulae. Results obtained from fractographic examination also have been used to describe the location of the origin of the fracture and understand the distribution of defects; i.e., there is a unimodal distribution of defects (intrinsic defects), despite the fact that some outlier values are normally observed in the fractured surfaces. Correspndence: P. M. Amaral, Department of Materials Engineering, Instituto Superior Técnico, Technical University of Lisbon, Av. Rovisco Pais, 1049-001 Lisboa, Portugal