Test method and experimental research on resistance of oil shale under high temperature

Heating the oil shale by current underground to accomplish in-situ transformation process, is a viable direction. The electrical properties of oil shale under different temperatures, especially the resistance, become important. Charging oil shale underground to heat oil shale till kerogen’s decomposition temperature, then crude oil and other gases can be generated. The resistance of the oil shale samples was measured by Direct Current (DC) quadripole method to find out the variation rules of resistance value. In the experiments, oil shale presented its semiconductor property. When heated till 350℃-450℃, its resistance changed greatly, optional for heating and cracking. The porosity, oil content, media and composition affected the resistance largely.     

基于特征的海洋锋线过程时空数据模型分析与应用

客观世界存在时空场,大部分地理实体或现象在时空域具有动态变化特性,其空间、时间和属性是过程的统一体,传统的GIS时空数据模型在描述、表达、组织与分析这类数据时面临许多挑战。然而,基于特征的数据模型和以过程为对象的时空数据组织在动态数据的描述与表达的方面具有独特的优势。本文探讨了基于特征的线过程时空数据模型组织的六元组框架体系,实现空间、时间和属性的一体化存储和地理实体的动态分析。在分析线时空过程特性的基础上,归纳总结出3大类12个类别的线过程,进一步提出了基于特征的线过程时空数据模型(Feature-based Line Process Spatio-temporal Data Model)的概念;利用文件层次分块结构对时空线过程数据进行了组织与存储。最后以海洋锋为实例,探讨了该模型在时空数据组织、时空查询、时空过程提取和时空过程可视化等方面的应用。结果表明,该模型能够很好地应用于具有时空过程特性的线数据中,也为时空数据模型的总体设计提供借鉴。     

基于QSSP的震源破裂过程反演方法

在Qt平台上,基于QSSP软件,利用C⁺⁺进行地震破裂过程反演方法研究。采用按阶段反演的方法,第1阶段反演采用热浴算法进行全局搜索,先按断层区域的构造背景等初始条件对参数范围进行划取,在该范围内随机给定一组初始值开始迭代,使波形初步拟合避开局部最优解;第2阶段反演使用拟牛顿法进行快速收敛,提高波形拟合程度,迭代至目标函数小于误差条件时停止,输出满足误差条件的待解模型参数。为避免模型参数出现病态问题,使用拉普拉斯方程建立平滑矩阵并引入平滑因子对断层模型进行平滑约束。使用棋盘模型验证该方法的稳定性和可靠性。最后,将全国13个台站的重力数据积分后对2013-04-20芦山7.0级地震的破裂过程进行反演,并与其他研究结论进行对比分析。     

基于改进DeepLabv3+孪生网络的遥感影像变化检测方法

传统遥感影像变化检测方法依赖人工构建特征,算法设计复杂且精度不高;而将2幅不同时相影像叠加后输入神经网络的遥感影像变化检测方法会造成不同时相的特征相互影响,难以保持原始影像的高维特征,且模型鲁棒性较差。因此,本文提出一种基于改进DeepLabv3+孪生网络的遥感影像变化检测方法,以经典DeepLabv3+网络的编解码结构为基础对网络进行改进:(1)在编码阶段利用共享权值的孪生网络提取特征,通过2个输入端分别接收2幅遥感影像,以保留不同时相影像的高维特征;(2)在特征融合中用密集空洞空间金字塔池化模型代替空洞空间金字塔池化模型,通过密集连接的方式结合每个空洞卷积的输出,以提高对不同尺度目标分割的精度;(3)在解码阶段中针对不同层级特征图信息差异较大,难以融合的问题,引入基于注意力机制的特征对齐模型,引导不同层级的特征对齐并强化学习重要特征,以提升模型的鲁棒性。应用开源数据集CDD验证本文方法的有效性,并与UNet-EF、FC-Siam-conc、Siam-DeepLabv3+和N-Siam-DeepLabv3+网络对比试验。试验结果表明,本文方法在精确率、召回率、F1值和总体精度上达到8...     

对秦岭造山带几个重大问题的认识

详细讨论了秦岭一大别造山带的几个重大问题，对它的发展阶段进行了新的划分，对其形成发表了新的观点：认为秦岭造山带、华北板块、扬子板块是中生代以来，在抽拉－逆冲岩片构造体制作用下形成的。对秦岭一大别造山带的表层构造特征以及它和深层构造的关系、花岗岩的成因类型、断层与界面的区分及成矿作用等都提出了和以往不同的认识。     

Fast inversion of rupture process of the 14 April 2010 Yushu,Qinghai, earthquake

Four results of the rupture process of 14 April 2010 Yushu, Qinghai, earthquake, obtained by inverting the broadband seismic data of Global Seismographic Network (GSN) based on the inversion method of earthquake rupture process, were compared and discussed. It is found that the Yushu earthquake has several basic characteristics as follows: ① There exist two principal sub-events which correspond to two slip-concentrated patches being located near the hypocenter and to the southeast of the epicenter. The rupture of the slip-concentrated patch to the southeast of the epicenter broke though the ground surface; ② The peak slip and peak slip-rate are about 2.1 m and 1.1 m/s, respectively, indicating that the Yushu earthquake is an event with large slip-rate on the fault plane; ③ Overall the Yushu earthquake is a unilateral rupture event with the rupture mainly propagating southeastward. The strong focusing of the seismic energy in the southeast of the epicenter due to the "seismic Doppler effect" reasonably accounts for the tremendous damage in the Yushu city.     

浅析数字龙江地理空间框架建设一期工程作业中的若干关键问题

在开展数字龙江地理空间框架建设一期工程——黑河测区工作中,利用航空和卫星影像进行1∶10 000地形图的测绘与更新,本文针对具体工作中的一些关键及重要问题进行了阐述。     

西藏当雄地区构造地貌及形成演化过程

西藏当雄地区在区域性挤压缩短期后发育2种典型层状地貌面,即山顶面与盆地面,不同地块具有不同特点与不同高度的山顶面.山顶面形态与分区性、分段性明显受早期逆冲推覆构造与晚期断裂所控制,山顶面梯级带对应于区域张性-张扭性断裂与盆-山构造-地貌边界.原始山顶面或高原主夷平面主要形成于15~8 Ma,念青唐古拉山脉开始快速隆升与两侧地块初始断陷时代为8~4 Ma,羊八井-当雄-谷露盆地快速裂陷事件发生于2~1.5 Ma,区域NW向走滑断裂与现今河流峡谷主要形成于1.4 Ma以来.当雄及邻区层状地貌面的形成、裂解与演化良好地反映了青藏高原腹地挤压缩短与地壳增厚期后区域构造活动和地貌环境变迁的动力学过程.     

多层城市冠层模式的建立及数值试验研究

为在城市气象数值模拟中更好地体现由城市发展引起的下垫面土地利用改变及人为活动对大气过程的影响,建立了基于建筑物三维分布的多层城市冠层模式,冠层内动力方程组考虑了建筑物冠层拖曳力的作用及雷诺应力的影响,通过引入建筑物宽度、间距以及垂直分布密度指数等建筑物形态特征参数,以更好地体现城市复杂地表对大气温度、湿度及动量方程的影响.同时,该模式分屋顶、4个侧壤及地面分别考虑辐射及能量平衡求解表面温度,计算各表面与大气的通量交换,并考虑辐射阴影效应、冠层内部各个面之间的可视因子、以及与冠层内建筑物密度指数、可视因子等相关的多重反射辐射导致的辐射截陷作用.模式的离线检验结果表明:(1)冠层模式计算风廓线与风洞实验测量数据吻合良好;(2)离线冠层模式能够模拟实际小区的风速、温度垂直廓线,并能够较好地体现小区内气温日变化.冠层模式与区域边界层模式耦合检验结果表明:(1)耦合模拟的近地面(2 m处)气温及地表温度的结果明显优于传统的水泥平板方案,尤其是在夜间,水泥平板方案与实测气温最大偏差4 K左右,耦合模拟方案为1-2 K;(2)耦合模拟方案考虑了建筑物对冠层之上的拖曳力影响以及建筑物形态结构对雷诺应力的影响,风速(10 m处)计算结果与观测值相差约在1 m/s,水泥平板方案偏差3 m/s左右.     

Solar Type III Bursts and the Generation of Backward Langmuir Wave

It is generally believed that the conversion of Langmuir wave (LW) to electromagnetic wave is the generating mechanism of solar type III bursts. The Langmuir wave can be easily excited by the instability of the electron-beam current, and the interaction of the forward and backward Langmuir waves is considered to be the cause for the second harmonic of a type III burst, but, so far, the dispersion equation and generating mechanism of the backward Langmuir wave have not yet been thoroughly studied. For the equation of two-stream instability with temperature included, an analytical solution is derived. It is found that the dispersion relation of the forward LW strongly depends on the beam-current speed, while that of the backward LW depends only on the thermal velocity, when the other parameters are fixed. These analytical results are partially confirmed by particle-in-cell (PIC) simulations. With the PIC simulation, the generating mechanism of the backward LW is studied, and it is revealed that the backward LW can not be excited directly by the electron-beam current, and that its energy is obtained basically from the scattering of the forward LW. However, the electron-beam current does cause a direct amplification of the second harmonic of the forward LW.