基于资源三号测绘卫星DSM的复杂地形水系提取精度分析——以云南省高海拔山区为例

针云南省楚雄地区为研究区域,采用1:25万水系数据为参照,基于资源三号测绘卫星DSM(ZY-3DSM)数据自动提取水系,并从河流分支点和水系因子两方面分析其精度,再与SRTM DEM提取的水系进行比较。结果表明:(1)从河流分支点来看,ZY-3 DSM提取的水系精度普遍高于SRTM DEM,在中海拔丘陵和中海拔台地上点位精度比后者高50%以上,在低海拔平原和中海拔平原上点位精度比后者高25%以上;(2)就水系长度和分级而言,ZY-3 DSM提取的水系总长度比SRTM DEM约长15%,一级和二级河流数目比后者多18%;(3)从水系密度和河网套合差来看,ZY-3 DSM提取水系与1:25万水系吻合度较好,水系密度相似度高于SRTM DEM约3倍,河网套合程度前者高于后者45%。总之,基于ZY-3 DSM提取的水系精度较高,完全符合测绘标准规范,且各方面均优于SRTM DEM提取的水系。     

基于均值变点分析法的资源三号测绘卫星DSM水系自动提取研究——以云南省高海拔山区为例

水系自动提取是保证基础地理数据现势性的关键,而获得最佳集水面积阈值是提高水系提取精度的前提条件。集水面积阈值一般依靠定性分析的方法获取,采用均值变点分析法定量确定水系的集水面积阈值,可以满足基础地理数据精确性的要求。以云南省龙川江流域为研究区域,基于资源三号测绘卫星ZY-3 DSM和SRTM DEM两种数据,利用GIS工具分别提取该流域水系,再由均值变点分析法确定最佳集水面积阈值,并比较分析这两种水系的提取精度。研究结果表明:1随着集水面积阈值的增加,提取的水系密度减小且趋缓。ZY-3 DSM和SRTM DEM的最佳集水面积阈值分别是6.0 km~2和2.75 km~2;2在最佳集水面积阈值下,ZY-3 DSM提取的河流数比SRTM DEM多20.6倍,河流等级多2级,各级支流数为SRTM DEM的4.7~9.5倍不等,水系密度达到SRTM DEM的4.5倍;3与1:250 000水系数据相比,ZY-3 DSM和SRTM提取的河流点位平均相差395.23 m,RMSE为391.83 m。由此可见,利用均值变点分析法基于ZY-3 DSM提取的水系精度更高,完全满足测绘地理数据更新的现势性、准确性要求。     

Evaluation of LiDAR and image segmentation based classification techniques for automatic building footprint extraction for a segment of Atlantic County,New Jersey

Extracting high-quality building footprints is a basic requirement in multiple sectors of town planning, disaster management, 3D visualization, etc. In the current study, we compare three different techniques for acquiring building footprints using (i) LiDAR, (ii) object-oriented classification (OOC) applied on high-resolution aerial photographs and (iii) digital surface models generated from interpolated LiDAR point cloud data. The three outputs were compared with a digitized sample of building polygons quantitatively by computing the errors of commission and omission, and qualitatively using statistical operations. These findings showed that building footprints derived from OOC gave highest regression and correlation values with least commission error. The R² and R values (0.86 and 0.92, respectively) imply that the footprint areas derived by OOC matched more closely with the actual area of buildings, while a low commission error of 24.7% represented a higher number of footprints as correctly classified.     

城市地理空间数据集成应用探讨

城市地理空间数据是表达城市地理要素的数量、质量、分布特征、相互关系、变化规律的位置信息和属性信息。分析城市地理空间数据的组成结构、组织管理、集成利用,并将这些数据有效应用于城市地理信息系统建设之中,将在城市信息化道路上起到举足轻重的作用。该文以开发的"兰州市城关区地理信息集成系统"为例,重点阐述了城市地理空间数据的构成与获取方式,研究了城市地理空间数据与业务部门数据的集成方法,并对城市地理空间数据在晕渲图制作、三维景观生成、数据可视化等主要应用上进行了分析和探讨。     

ZY-3卫星异轨立体影像DSM提取精度分析

为充分发掘以ZY-3为代表的国产测绘卫星的效能,本文提出了由不同轨道的前视、后视相机影像构建异轨立体的测绘模式,选取该卫星在不同轨道分别侧摆3.9°和0°成像获取的河南嵩山同一地区三线阵影像,比较了常规同轨立体和本文异轨立体构建方式下的传感器校正级(SC)影像几何定位精度及数字表面模型(DSM)提取精度。试验结果显示,由于基高比条件良好,异轨立体构建方式能够达到与同轨立体相似的几何定位精度,自动提取的异轨DSM与同轨DSM高程精度基本一致。     

结合地表模型和遥感影像的地表变化监测

针对现有快速发现和准确更新地表变化信息的方法效率低、工作量大等问题,文章结合DSM差分算法和遥感影像变化检测算法,提出了一种三维动态监测方法:DSM差分算法能够监测地物在高度方面的变化,遥感影像解译可以弥补DSM变化图斑的属性信息,并补充DSM技术无法获得的属性变化图斑和面积变化图斑。实验结果表明,所提监测方法能动态监测工业园区的开工率和重点项目建设状态,运用在土地监管实际工作中具有可行性。     

Open-pit mining geomorphic feature characterisation

Among the anthropogenic topographic signatures on Earth, open-pit mines are of great importance. Mining is of interest to geomorphologists and environmental researchers because of its implication in geomorphic hazards and processes. In addition, open-pit mines and quarries are considered the most dangerous industrial sector, with injuries and accidents occurring in numerous countries. Their fast, accurate and low-cost investigation, therefore, represents a challenge for the Earth science community. The purpose of this work is to characterise the open-pit mining features using high-resolution topography and a recently published landscape metric, the Slope Local Length of Auto-Correlation (SLLAC) (Sofia et al., 2014). As novel steps, aside from the correlation length, the terrace’s orientation is also calculated, and a simple empirical model to derive the percentage of artificial surfaces is tested. The research focuses on two main case studies of iron mines, both located in the Beijing district (P.R. China). The main topographic information (Digital Surface Models, DSMs) was derived using an Unmanned Aerial Vehicle (UAV) and the Structure from Motion (SfM) photogrammetric technique. The results underline the effectiveness of the adopted methodologies and survey techniques in the characterisation of the main mine’s geomorphic features. Thanks to the SLLAC, the terraced area given by open-cast/open-pit mining for iron extraction is automatically depicted, thus, allowing researchers to quickly estimate the surface covered by the open-pit. This information could be used as a starting point for future research (i) given the availability of multi-temporal surveys to track the changes in the extent of the mine; (ii) to relate the extent of the mines to the amount of processes in the area (e.g. pollution, erosion, etc.), and to (iii) combine the two points, and analyse the effects of the change related to changes in erosion. The analysis of the correlation length orientation also allows researchers to identify the terrace’s orientation and to understand the shape of the open-pit area. The tectonic environment and history, or inheritance, of a given slope can determine if and how it fails, and the orientation of the topographic surface or excavation face, with respect to geologic features, is of major significance. Therefore, the proposed approach can provide a basis for a large-scale and low-cost topographic survey for sustainable environmental planning and, for example, for the mitigation of environmental anthropogenic impacts due to mining.     

无人机遥感技术制作 DEM 新方法

无人机遥感技术能够快速制作地表模型DSM ,由于测区地物的存在,地表模型不能替代DEM ,本文提出利用激光点云处理软件 Terrasolid软件,通过高程分类算法对点云数据进行分类,通过人机互助快速提取出地面点制作DEM 。     

空白真正射纠正影像的生成

空白真正射纠正影像的生成是基于DSM 制作真正射影像的最重要的一部分,是进行正射纠正读取原始图像数据进行内定向和相对定向后首先要解决的问题。本文以VC＋＋中M FC为开发平台利用仿射变换,实现影像内定向;然后利用共线方程,解决像素坐标、像平面坐标和地面点坐标之间的相互转化,为利用数字微分纠正技术进行影像的真正射纠正的灰度赋值做好了准备。     

FORSAT: a 3D forest monitoring system for cover mapping and volumetric 3D change detection

ABSTRACT

A 3D forest monitoring system, called FORSAT (a satellite very high resolution image processing platform for forest assessment), was developed for the extraction of 3D geometric forest information from very high resolution (VHR) satellite imagery and the automatic 3D change detection. FORSAT is composed of two complementary tasks: (1) the geometric and radiometric processing of satellite optical imagery and digital surface model (DSM) reconstruction by using a precise and robust image matching approach specially designed for VHR satellite imagery, (2) 3D surface comparison for change detection. It allows the users to import DSMs, align them using an advanced 3D surface matching approach and calculate the 3D differences and volume changes (together with precision values) between epochs. FORSAT is a single source and flexible forest information solution, allowing expert and non-expert remote sensing users to monitor forests in three and four (time) dimensions. The geometric resolution and thematic content of VHR optical imagery are sufficient for many forest information needs such as deforestation, clear-cut and fire severity mapping. The capacity and benefits of FORSAT, as a forest information system contributing to the sustainable forest management, have been tested and validated in case studies located in Austria, Switzerland and Spain.