我国陆上大中型气田分布规律与有利勘探区带优选

“八五”、“九五”期间我国天然气探明储量幅度增长,大中型气田分布规律的深化研究密切关系到天然气储量的增长势头。克拉通盆地下层序古隆起控气理论和上层序非构造圈闭控气机理是克拉通大中型气田富集分布的基本规律,前陆盆地是我国富气盆地类型之一,其冲断带下盘大型造圈闭群、前缘斜坡岩性尖灭区带与浅层次生气藏、前缘隆起上的断块圈闭群等是该类盆地有利的天然气富集区带。依据充分的地质资料,结合我国天然气勘探实际,提     

3D gravity modelling for Anyongbok Seamount in the East Sea

A seamount chain with an approximately WNW trend is observed in the northeastern Ulleung Basin. It has been argued that these seamounts, including two islands called Ulleung and Dok islands, were formed by a hotspot process or by ridge related volcanism. Many geological and geophysical studies have been done for all the seamounts and islands in the chain except Anyongbok Seamount, which is close to the proposed spreading ridge. We first report morphological characteristics, sediment distribution patterns, and the crustal thickness of Anyongbok Seamount using multibeam bathymetry data, seismic reflection profiles, and 3D gravity modeling. The morphology of Anyongbok Seamount shows a cone shaped feature and is characterized by the development of many flank cones and flank rift zones. The estimated surface volume is about 60 km³, and implies that the seamount is smaller than the other seamounts in the chain. No sediments have been observed on the seamount except the lower slope, which is covered by more than 1,000 m of strata. The crustal structure obtained from a 3D gravity modeling (GFR = 3.11, SD 3.82 = mGal) suggests that the seamount was formed around the boundary of the Ulleung Plateau and the Ulleung Basin, and the estimated crustal thickness is about 20 km, which is a little thicker than other nearby seamounts distributed along the northeastern boundary of the Ulleung Basin. This significant crustal thickness also implies that Anyongbok Seamount might not be related to ridge volcanism.     

Hydrocarbon Potential of Pre-cenozoic Strata in the North Yellow Sea Basin

The North Yellow Sea Basin ( NYSB ), which was developed on the basement of North China (Huabei) continental block, is a typical continental Mesozoic Cenozoic sedimentary basin in the sea area. Its Mesozoic basin is a residual basin, below which there is probably a larger Paleozoic sedimentary basin. The North Yellow Sea Basin comprises four sags and three uplifts. Of them, the eastern sag is a Mesozoic Cenozoic sedimentary sag in NYSB and has the biggest sediment thickness; the current Korean drilling wells are concentrated in the eastern sag. This sag is comparatively rich in oil and gas resources and thus has a relatively good petroleum prospect in the sea. The central sag has also accommodated thick Mesozoic-Cenozoic sediments. The latest research results show that there are three series of hydrocarbon source rocks in the North Yellow Sea Basin, namely, black shales of the Paleogene, Jurassic and Cretaceous. The principal hydrocarbon source rocks in NYSB are the Mesozoic black shale. According to the drilling data of Korea, the black shales of the Paleogene, Jurassic and Cretaceous have all come up to the standards of good and mature source rocks. The NYSB owns an intact system of oil generation, reservoir and capping rocks that can help hydrocarbon to form in the basin and thus it has the great potential of oil and gas. The vertical distribution of the hydrocarbon resources is mainly considered to be in the Cretaceous and then in the Jurassic.     

Relationship between the seismicity and geologic structure of the Blanco Transform Fault Zone

Morphologic studies of an oceanic transform, the Blanco Transform Fault Zone (BTFZ), have shown it to consist of a series of extensional basins that offset the major strike-slip faults. The largest of the extensional basins, the Cascadia Depression, effectively divides the transform into a northwest segment, composed of several relatively short strike-slip faults, and a southeast segment dominated by fewer, longer faults. The regional seismicity distribution (m _b 4.0) and frequency-magnitude relationships (b-values) of the BTFZ show that the largest magnitude events are located on the southeast segment. Furthermore, estimates of the cumulative seismic moment release and seismic moment release rate along the southeast segment are significantly greater than that of the northwest segment. These observations suggest that slip along the southeast segment is accommodated by a greater number of large magnitude earthquakes. Comparison of the seismic moment rate, derived from empirical estimates, with the seismic moment rate determined from plate motion constraints suggests a difference in the seismic coupling strength between the segments. This difference in coupling may partially explain the disparity in earthquake size distribution. However, the results appear to confirm the relation between earthquake size and fault length, observed along continental strike-slip faults, for this oceanic transform.     

山东胜利油田海洋石油勘探开发现状及前景分析

胜利油田海上勘探区 ,位于渤海湾南部的极浅海海域 ,其范围为 :西起四女寺河口 ,经套儿河口、老黄河口、新黄河口、小青河口 ,东到潍河口 ,海岸长 4 1 4km,胜利矿产登记线内面积 4 870 km2 ,水深一般 0～ 5m,最深 1 8m。截止 2 0 0 0年年底 ,已完成二维地震 71 3 6.1 km,三维地震 1 588.58km2 ,完钻探井 1 0 2口 ,测井解释油气层井 87口 ,试油 85口 ,其中 74口获工业油流 ,6口获低产油流。发现了埕岛、埕北 3 0、新滩 3个油田 ,在明化镇组、馆陶组、东营组、沙河街组、中生界、上古生界、下古生界、太古界中发现了 8套含油层系 ,6种类型的油气藏 ,已探明含油面积 1 45.8km2 ,石油地质储量 3 860 9万 t;控制含油面积57.5km2 ,石油地质储量 894 8万 t,其中埕岛油田是渤海域发现最早的亿吨级油田 ,目前已建成 2 1 6万 t年生产能力 ,累积产油 1 0 57万 t。根据两轮资源评价及勘探实践的认识 ,与本区有关的 8个生油凹陷 (岐口、沙南、渤中、埕北、桩东、青东、莱州湾、潍北 )总资源量约 1 2 .0亿 t,目前已找到探明加控制石油地质储量为 4 .75亿 t,仍有较大的勘探开发潜力。今后将对 8个构造带 (埕子口、埕岛、埕北 3 0、长堤、垦东、青东、青坨子、潍北 )进行勘探 ,落实探明储量 ,进一步投入开发 ,为胜利油田     

Relationship between Shot-Induced Noise and Shot Interval in Seismic Refraction Experiments at Sea

Seismic noise induced by the seismic source during continuous profiling reduces the signal-to-noise ratio and hence the data quality. This noise is largely dependent on the shot interval. In this paper, the noise amplitude of refraction seismic records from a special experiment is analysed as a function of the shot interval. An empirical exponential relationship between mean peak noise amplitude and shot interval is deduced. By increasing the shot interval, the induced noise can be minimized on all successive records. This results in an improvement of the data, predominantly the signal-to-noise ratio. Because the seismic signal and the shot-induced noise have nearly the same spectra, the chance of improving the signal-to-noise ratio by stacking is significantly reduced.     

Dereverberation of marine reflection seismic data by a spatial combination of predictive deconvolution and velocity filtering

Contamination of seismic reflection records at early times by first-order water reverberations can be especially severe during survey operations over hard and flat sea floors on the continental shelf or in lake environments. A new dereverberation scheme based on two classical techniques — predictive deconvolution and velocity filtering — has been developed to address this problem. The techniques are combined spatially to take advantage of their complementary offset- and time-dependent properties. Stage I of the scheme consists of applying predictive deconvolution at short offset. The data are previously conditioned by a normal moveout correction with the water velocity which restores the periodicity of the reverberations in the offset-time plane and enhances the performance of deconvolution. Stage II of the scheme involves velocity filtering in the common-midpoint domain which is particularly effective at long offset where the moveout difference between primary reflections and reverberations is largest. The dereverberation scheme is well suited for the initial processing of large volumes of data due to the general availability of cost-effective deconvolution and velocity filtering algorithms in seismic processing software packages. Practical implementation issues are illustrated by a field example from the GLIMPCE survey in Lake Superior.Lithoprobe Publication No. 475.     

Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.