Quickbird遥感影象在土地利用类型整理中的应用——以四川遂宁市安居区为例

利用获取的四川遂宁市安居区东禅镇大面积相对准确的土地利用类型信息,建立土地分类的影象解译标志,然后在室内采用人工目视与人机交互式相结合的方法,提取土地利用现状信息。Quickbird影象分辨率高,但如何提高分类的精度和速度,是值得探讨的问题。     

GIS在四川城市环境地质调查评价中的应用

将GIS应用于四川城市环境地质调查评价,建立一套完整的标准,指导全省21城市的数据库建设工作。在数据库的基础上利用MAPGIS二次开发平台,集成四川城市环境地质问题调查评价信息系统,供地方政府和各级管理机构使用。     

Structural evolution of the Bayanhongor region, west-central Mongolia

Most of previous models suggest that the Central Asia Orogenic Belt grew southward in the Phanerozoic. However, in the Bayanhongor region in west-central Mongolia, volcanic arc, accretionary prism, ophiolite, and passive margin complexes accreted northeastward away from the Baydrag micro-continent, and hence the region constitutes the southwestern part of a crustal-scale syntaxis close to the west. The syntaxis should be original, because presumably reorientation due to strike-slip faulting can be ignored. It is reconfirmed that the Baydrag eventually collided with another micro-continent (the Hangai) to the northeast. A thick sedimentary basin developed along the southern passive margin of the Hangai micro-continent. This region is also characterized by an exhumed metamorphosed accretionary complex and a passive margin complex, which are both bounded by detachment faults as well as basal reverse faults which formed simultaneously as extrusion wedges. This part of the Central Asia Orogenic Belt lacks exhumed crystalline rocks as observed in the Himalayas and other major collisional orogenic belts. In addition, we identified two phases of deformation, which occurred at each phase of zonal accretion as D1 through Cambrian and Devonian, and a synchronous phase of final micro-continental collision of Devonian as D2. The pre-collisional ocean was wide enough to be characterized by a mid-ocean ridge and ocean islands. Two different structural trends of D1 and D2 are observed in accretionary complexes formed to the southwest of the late Cambrian mid-ocean ridge. That is, the relative plate motions on both sides of the mid-ocean ridge were different. Accretionary complexes and passive margin sediments to the northeast of the mid-ocean ridge also experienced two periods of deformation but show the same structural trend. Unmetamorphosed cover sediments on the accretionary prism and on the Hangai micro-continent experienced only the D2 event due to micro-continental collision. These unmetamorphosed sediments form the hanging walls of the detachment faults. Moreover, they were at least partly derived from an active volcanic arc formed at the margin of the Baydrag micro-continent.     

The Glueckstadt Graben of the North-German Basin: new insights into the structure from 3D and 2D gravity analyses

The structure of the Glueckstadt Graben has been investigated by use of 3D gravity backstripping technique and by 2D gravity and magnetic modelling. Subtracting the gravity effects of the Meso-Cenozoic sediments together with Permian salt reveals a positive residual anomaly within the Glueckstadt Graben. This anomaly includes two local maxima over the Westholstein and Eastholstein Troughs. The 2D gravity models point to the presence of a high-density body within the lower crust of the Glueckstadt Graben. In addition, the results of 2D magnetic modelling indicate that the central part of the high-density body is overlain by an area with high susceptibility. Most probable, the formation of this high-density body is a result of complex poly-phase tectonic history of the study area. Finally, the results of gravity modelling indicate that Permian salt is not homogeneous. 3D gravity analysis and, especially, 2D gravity modelling have distinguished the differences in degree of salt saturation in salt-rich bodies, and elucidate the proportion of Rotliegend salt.     

A virtual voyage through 3D structures generated by chaotic mixing of magmas and numerical simulations: a new approach for understanding spatial and temporal complexity of magma dynamics

In this contribution, we present a virtual voyage through 3D structures generated by chaotic mixing of magmas and numerical simulations with the aim to highlight the power of 3D representations in the understanding of this geological phenomenon. In particular, samples of mixed juveniles from Salina island (Southern Italy) are reconstructed in 3D by serial lapping and digital montage and numerical simulations are performed by using a 3D chaotic dynamical system. Natural and simulated magma mixing structures are visualized by using several multimedia tools including animations and “virtual reality” models. It is shown that magma interaction processes can generate large spatial and temporal compositional heterogeneities in magmatic systems. The same topological structures are observed in both 3D reconstructed rock samples and chaotic numerical simulations, indicating that the mixing of magmas is governed by chaotic dynamics. The use of 3D multimedia models gives the opportunity to penetrate into magma mixing structures and to understand their significance in the context of magma dynamics. Such an approach is very powerful since multimedia tools can strongly capture the attention of the reader bringing him/her into an interactive and memorable geological experience. Electronic supplementary material  enclosed:     

Comparison of numerical models of two debris flows in the Cortina d’ Ampezzo area,Dolomites, Italy

The accurate prediction of runout distances, velocities and the knowledge of flow rheology can reduce the casualties and property damage produced by debris flows, providing a means to delineate hazard areas, to estimate hazard intensities for input into risk studies and to provide parameters for the design of protective measures. The application of most of models that describe the propagation and deposition of debris flow requires detailed topography, rheological and hydrological data that are not always available for the debris-flow hazard delineation and estimation. In the Cortina d’Ampezzo area, Eastern Dolomites, Italy, most of the slope instabilities are represented by debris flows; 325 debris-flow prone watersheds have been mapped in the geomorphological hazard map of this area. We compared the results of simulations of two well-documented debris flows in the Cortina d’Ampezzo area, carried on with two different single-phase, non-Newtonian models, the one-dimensional DAN-W and the two-dimensional FLO-2D, to test the possibility to simulate the dynamic behaviour of a debris flow with a model using a limited range of input parameters. FLO-2D model creates a more accurate representation of the hazard area in terms of flooded area, but the results in terms of runout distances and deposits thickness are similar to DAN-W results. Using DAN-W, the most appropriate rheology to describe the debris-flow behaviour is the Voellmy model. When detailed topographical, rheological and hydrological data are not available, DAN-W, which requires less detailed data, is a valuable tool to predict debris-flow hazard. Parameters obtained through back-analysis with both models can be applied to predict hazard in other areas characterized by similar geology, morphology and climate.     

中国数字地质调查系统的基本构架 及其核心技术的实现

数字地质调查系统是贯穿整个地质矿产资源调查全过程的软件,涵盖地质矿产调查、矿产资源勘查、矿体模拟、品住估计、资源量估算、矿山开采系统优化等内容。考虑数字地质调查系统的应用技术层面,从数据“层”模型、数据流“池”技术、不同阶段数据模型继承技术、数据互操作技术等几个方面讨论了核心技术及其实现,通过基于无缝一体化技术的数据采集、管理、综合处理与成果表达,在实体或矿块的矿床建模技术与品住估计、储量估算等方面展现了全地质调查过程的数字化,不但为地质人员应用高新技术降低了门坎,而且极大地提高了研究精度和效率,丰富了成果的表现形式和服务形式。随着数字地质调查系统的完善和应用水平的提高,数字地质调查系统将成为中国地质调查的主流软件体系。     

葛店矿双庙扩大区三维地震勘探

葛店煤矿双庙扩大区位于豫、皖两省交界处。勘探区为一轴向北北东向的不对称向斜构造,地层倾角26°～30°,测区深部有岩浆岩侵入体,严重影响煤层赋存形态;地表条件复杂,村庄密集、河流较多,测区东侧塌陷区水塘大面积分布．三维地震勘探野外施工难度大。本区地震勘探观测系统设计为12线18炮制,为避免偏移归位及叠加次数降低等问题,在向斜轴部两侧、村子周边及河岸处适当加密炮点,并在塌陷区利用钢钎插置检波器以保证CDP点完整性。数据处理采取了叠前反褶积、叠前时间偏移等技术,数据处理效果显著。遵循多波组对比、多个数据体综合解释的原则,以纵向、横向和任意时间剖面相结合,充分利用三维可视化技术进行地震资料解释。本次勘探成果查明了主采煤层三2^2、二2煤层的构造形态及埋藏深度;解释落差5m以上断层34条,其中修改原有断层5条;另外新发现小于5m的异常断点22个。经巷道验证煤层底板标高误差0．43％～1．96％,巷道已揭露断层7条,与解释成果基本一致。     

初至层析静校正在复杂山地三维地震勘探中的应用

随着地形高差增大、地貌单元多变、近地表模型复杂,目前被广泛应用的初至折射静校正的精度已无法满足精细勘探的要求。初至层析静校正技术,由给定的初始模型进行正演,用射线追踪方法得到初始模型的初至波,利用该初至波和实际拾取的初至波进行比较,计算地表模型的修正量,反复迭代求得准确的地表模型。山西省国阳新能股份有限公司二矿390水平九采扩区地表标高940～1100m,地貌单元复杂,在对该区资料处理时,利用初至层析折射静校正,经9次迭代计算后,真实地刻划出近地表模型。在二种静校正技术对比中,初至折射静校正不但近地表模型精度低于层析折射静校正,而且其叠加剖面精细程度也远低于层析静校正,如在初至折射静校正叠加剖面同相轴上呈现的凹凸形态,在层析静校正叠加剖面并无显示,且后者剖面的信噪比也比前者明显提高。