智能JRC测量仪的研制

研制了一种智能JRC测量仪,该仪器可直接测量岩体结构面的粗糙度系数JRC值,适用于野外任意产状的岩体结构面,可以沿任意方向测量岩体结构面粗糙度系数,具有重量轻、体积小、携带方便、操作简单、测量速度快等特点。     

Settlement prediction by spatial-temporal random process using Asaoka's method

A methodology was presented for observation-based settlement prediction with consideration of the spatial correlation structure of soil. The spatial correlation is introduced among the settlement model parameters and the settlements at various points are spatially correlated through these geotechnical parameters, which naturally describe the phenomenon. The method is based on Bayesian estimation by considering both prior information, including spatial correlation and observed settlement, to search for the best estimates of the parameters at any arbitrary points on the ground. Within the Bayesian framework, the optimised selection of auto-correlation distance by Akaike's Bayesian Information Criterion (ABIC) is also proposed. The application of the proposed approach in consolidation settlement prediction using Asaoka's method is presented in this paper. Several case studies were carried out using simulated settlement data to investigate the performance the proposed approach. It is concluded that the accuracy of the settlement prediction can be improved by taking into account the spatial correlation structure and the proposed approach gives the rational prediction of the settlement at any location at any time with quantified uncertainty.     

载体桩在陕南粉质黏土地区的适用性研究

以陕南粉质黏土地区某住宅楼施工现场为试验场地,开展了灌注桩和载体桩复合地基的现场静载试验,结合经验法理论计算,从承载力和建设成本两个方面,对比分析了两种地基基础方案的优劣。结果显示:灌注桩和载体桩复合地基荷载-沉降曲线均为缓变型,两种方案均能提供较高的抗压承载力;当载体桩桩长超过10 m,且作为复合地基增强体时,经验法计算过程未考虑桩端阻力的扩大头效益,计算结果明显低于现场试验结果;在相同桩身用料投入条件下,载体桩复合地基较灌注桩能够提供更高承载力。在陕南的类似粉质黏土地区,建议优先考虑选用载体桩复合地基方案。     

半圆型结构冰压力的物理模拟试验研究

利用DUT-1非冻结合成模型冰开展1:25冰对半圆型构件的物理模拟试验研究. 首先用简单的斜面构件的物理模拟试验检验了整体试验装置和技术设备的可靠性, 然后以同样比尺进行2种冰厚在5个不同水位条件的系列试验, 获得了模型冰排在半圆型构件前的破碎堆积现象和作用于构件上的水平和垂直作用力过程.结合实测模型冰物理和力学指标, 通过优化组合, 拟合出半圆型防波堤冰荷载的试验公式. 这些公式包含了冰对半圆型结构的弯曲破坏作用力、挤压破坏作用力及爬坡和堆积作用力.     

比奥固结理论在堆载预压加固工程场地中运用

运用平面应变比奥固结有限单元法，对南京某钢铁厂江边原料厂采用堆载预压结合塑料排水板处理的软土地基进行了计算，得到了较为理想的效果。计算中将塑料排水板合理地简化成等效砂墙，理论计算结果与实测结果吻合较好。验证了计算方法是合理可行的。     

Ablation Characteristic of Ilmenite using UV Nanosecond and Femtosecond Lasers: Implications for Non‐Matrix‐Matched Quantification

Ilmenite (FeTiO₃) is a common accessory mineral and has been used as a powerful petrogenetic indicator in many geological settings. Elemental fractionation and matrix effects in ilmenite (CRN63E‐K) and silicate glass (NIST SRM 610) were investigated using 193 nm ArF excimer nanosecond (ns) laser and 257 nm femtosecond (fs) laser ablation systems coupled to an inductively coupled plasma‐mass spectrometer. The concentration‐normalised ⁵⁷Fe and ⁴⁹Ti responses in ilmenite were higher than those in NIST SRM 610 by a factor of 1.8 using fs‐LA. Compared with the 193 nm excimer laser, smaller elemental fractionation was observed using the 257 nm fs laser. When using 193 nm excimer laser ablation, the selected range of the laser energy density had a significant effect on the elemental fractionation in ilmenite. Scanning electron microscopy images of ablation craters and the morphologies of the deposited aerosol materials showed more melting effects and an enlarged particle deposition area around the ablation site of the ns‐LA‐generated crater when compared with those using fs‐LA. The ejected material around the ns crater predominantly consisted of large droplets of resolidified molten material; however, the ejected material around the fs crater consisted of agglomerates of fine particles with ‘rough' shapes. These observations are a result of the different ablation mechanisms for ns‐ and fs‐LAs. Non‐matrix‐matched calibration was applied for the analysis of ilmenite samples using NIST SRM 610 as a reference material for both 193 nm excimer LA‐ICP‐MS and fs‐LA‐ICP‐MS. Similar analytical results for most elements in ilmenite samples were obtained using both 193 nm excimer LA‐ICP‐MS at a high laser energy density of 12.7 J cm^?2 and fs‐LA‐ICP‐MS.     

Copper Speciation in a Collection of Geochemical Reference Materials Using Sequential Extraction and Evaluation of the Validity Using XANES Spectroscopy

Copper speciation in a collection of Japanese geochemical reference materials (JSO‐1, JLk‐1, JSd‐1, ‐2, ‐3 and ‐4, JMs‐1 and JMs‐2) was achieved by sequential extraction and characterised using X‐ray absorption near‐edge structure spectroscopy. In the first step of the extraction, referred to as the acid fraction, between 1% and 20% total Cu within the reference materials was extracted. Such a result is typically accounted for by absorption of Cu onto clay minerals. However, the presence of Cu sulfate (an oxidation product of chalcopyrite) was observed in some of the stream sediments affected by mining activity (JSd‐2 and JSd‐3) instead. Copper was extracted in the reducible fraction (targeting Fe hydroxide and Mn oxide) (2–49% total Cu). Between 2% and 51% Cu was extracted in the oxidised fraction (targeting sulfides and organic matter). X‐ray absorption near‐edge structure spectroscopy clarified that the reducible fraction consisted of Cu bound to Fe hydroxide, whereas the oxidised fraction was a mixture of Cu bound to humic acid (HA) and Cu sulfide. In the oxidisable fraction, chalcopyrite was the predominant species identified in JSd‐2, and Cu bound to HA was the major species identified in JSO‐1 (a soil sample).     

北祁连地区中寒武世岩相古地理研究

现今地处造山带的北祁连地区在中寒武世时期拉张的构造背景下海域进一步拓宽。通过对北祁连地区中寒武统地层野外调查及室内分析研究,在"构造控盆、盆控相"的思路控制下,以沉积岩性、结构-构造、古生物组合等为基础,在优势相原则的指导下,共划分出浅海陆棚相、半深海相、深海盆地相3种沉积相类型。结合前人的研究资料,编制北祁连地区中寒武世的沉积构造格架及沉积盆地类型图,分析其空间配置关系。在此基础上,采用造山带岩相古地理编图方法,恢复与重建研究区的古地理面貌,编制相应的古地理图。     

Situating corporate framings of child labor: Toward grounded geographies of working children in globalized agriculture

The expansion of multinational corporations into agricultural production around the world is resulting in new forms of engagement in specific places. In the context of neoliberal restructuring, these engagements are tied to shifting landscapes of societal, governmental and industry-based perceptions on the role of corporations in labor regimes. But how are these engagements developed and how do they connect to the everyday lives of workers? In India, when Monsanto expanded into hybrid cotton seed production in the early 2000s, the corporation came under pressure to address concerns over the widespread employment of children and young workers for seed pollination. In response, the corporation developed an approach to child labor that, I argue, works to reinforce generalized and problematic notions of childhood and work. Corporate engagements in global agriculture need to be situated in time and space, and alongside the experiences of workers. Children experience attempts to shape their patterns of work and mobility as a series of surmountable obstacles, disconnected from the process of deciding whether or not they will engage in this work. Drawing on qualitative fieldwork in Gujarat and Rajasthan, and documentary analysis of public documents, I outline the development of a corporate response to child labor and place it within the context of the rise of corporate social responsibility, global ideas of child labor, and in the specific case of cotton seed production in western India. I demonstrate that contextualized geographies of working children in globalized agriculture reveal the nature of multinational corporations’ engagements in specific places.