辽宁瓦房店金刚石矿床50号岩管地质特征及找矿预测

以辽宁瓦房店金刚石矿床50号岩管为例,系统分析了该矿床的地质特征。通过对斑状富金云母金伯利岩、含围岩角砾斑状金伯利岩和金伯利凝灰角砾岩进行岩石地球化学分析发现: 碳酸盐化金伯利凝灰角砾岩超基性成分较少,滑石化、蛇纹石化及碳酸盐化混合金伯利凝灰角砾岩超基性成分较多; 铬、镍、钛在金伯利凝灰角砾岩中的含量较低,在含围岩角砾斑状金云母金伯利岩中的含量略高,在斑状富金云母金伯利岩和斑状金伯利岩中的含量最高。该矿床主要为含围岩角砾斑状金伯利岩和斑状富金云母金伯利岩,其次为金伯利凝灰角砾岩、含围岩角砾斑状金云母金伯利岩和含金伯利物质角砾岩。含铬镁铝榴石、铬铁矿和碳硅石是金刚石的伴生矿物。水平方向上,金伯利岩含矿品位西部较富,东部较贫; 垂直方向上,金伯利岩含矿品位变化较小。通过三维建模,推测50号岩管不是根部相,而是受EW向推覆构造作用影响发生的断层错位,在其东侧600 m深处存在50-1号金伯利岩体。     

流塑淤泥地层深基坑钢板桩围堰位移突变原因分析及处理

广东省珠海市洪鹤大桥主墩承台位于珠江西江流域的流塑状淤泥地层,采用钢板桩围堰进行基坑支护,基坑开挖过程中,钢板桩围堰发生较大的变形。经详细分析,发现导致事故的主要原因有地下水位持续升高导致土体力学性能显著下降、边跨侧钢板桩长度不足、基坑边缘集中荷载过大、施工控制不严、内支撑体系施工精度不足等。为了确保深基坑支护的安全,在全面分析总结了钢板桩围堰变形原因的基础上,结合实际情况,采取了增设穿透淤泥质土层的钢管桩围堰、加强内支撑体系等加固处理措施,并在实施过程中进行持续监测,最终安全地完成了基坑工程的施工。     

Formation of mud clast breccias and the process of sedimentary autobrecciation in the hominin-bearing (Homo naledi) Rising Star Cave system,South Africa

Unconsolidated mud clast breccia facies in the hominin-bearing (Homo naledi) Rising Star Cave, Cradle of Humankind, South Africa, are interpreted to have formed through a process termed sedimentary autobrecciation in this study. This process, by which most of the angular mud clast breccia deposits are thought to have formed autochthonously to para-autochthonously via a combination of erosion, desiccation, diagenesis and microbial alteration of laminated mud deposits, is thought to have taken place under relatively dry (i.e. non-flooded) conditions inside the cave. Subsequently, gravitational slumping and collapse was the dominant mechanism that produced the mud clast breccia deposits, which commonly accumulate into debris aprons. The mud clast breccia is typically associated with (micro) mammal fossils and is a common facies throughout the cave system, occurring in lithified and unlithified form. This facies has not been described from other cave localities in the Cradle of Humankind. Additionally, sedimentary autobrecciation took place during the deposition of some of the fossils within the Rising Star Cave, including the abundant Homo naledi skeletal remains found in the Dinaledi Subsystem. Reworking of the mud clast breccia deposits occurs in some chambers as they slump towards floor drains, resulting in the repositioning of fossils embedded in the breccias as evidenced by cross-cutting manganese staining lines on some Homo naledi fossil remains. The formation of the unlithified mud clast breccia deposits is a slow process, with first order formation rates estimated to be ca 8 × 10⁻⁴ mm year⁻¹. The slow formation of the unlithified mud clast breccia facies sediments and lack of laminated mud facies within these deposits, indicates that conditions in the Dinaledi Chamber were probably stable and dry for at least the last ca 300 ka, meaning that this study excludes Homo naledi being actively transported by fluvial mechanisms during the time their remains entered the cave.     

Radiolarian‐based study on the fabric and the formation process of the Early Cretaceous mélange near Zhongba,Yarlung–Tsangpo Suture Zone,southern Tibet

The Yarlung–Tsangpo Suture Zone (YTSZ), as the southernmost and youngest among the sutures that subdivides the Tibetan Plateau into several east–west trending blocks, marks where the Neo‐Tethys was consumed as the Indian continent moved northward and collided against the Eurasian continent. Mélanges in the YTSZ represent the remnants of the oceanic plate through subduction and collision. Mélanges are characterized by a highly sheared volcanoclastic or siliceous mudstone matrix including blocks of chert, claystone, and basalt. Detailed radiolarian analyses are conducted on the mélange near Zhongba County. Macroscopic, mesoscopic, and microscopic observations are combined in order to elucidate the relationships among age, lithology, and structure of blocks in the mélange. Reconstructed ocean plate stratigraphy includes Lower Jurassic limestone within the chert sequence accumulated at a depth near the CCD (Unit 2), Upper Jurassic thin‐bedded chert interbedded with claystone deposited in the wide ocean basin (Unit 3), and Lower Cretaceous chert with siliceous mudstone (Units 4 and 5), representing the middle parts of ocean plate stratigraphy. The results highlight the fabric of brecciated chert on mesoscopic scale, which is thought to be due to localized overpressure. The formation of mesoscopic and microscopic block‐in‐matrix fabrics in the mélange is proposed for the chert and siliceous mudstone bearing different extents of consolidation and competence during the progressive deformation of accreted sediments at shallow‐level subduction.     

再论盐源模范村喜马拉雅期斑岩铜矿床地质特征及找矿前景

该矿床具有典型斑岩铜矿特征,成岩的多期次构成复式岩体,断裂构造控制的隐爆碎裂岩筒为成矿提供了通道和沉积场所.多期次成矿,特别是次生富集作用形成达中型规模的Ⅰ号矿体,影响次生富集带发育的F7断裂带起了重要作用.总结出适合本区斑岩群特点的找矿标志和提出的找矿靶区,对开展新一轮普查找矿具有现实意义.     

改进型中心管模型能量转换性能试验及样机设计

为了提高中心管振荡水柱波浪能利用技术能量转换效率,基于新的认识和目前常用的2.4米导航灯标,对中心管尾部设计了三种模型并在造波水槽中进行能量转换性能试验。试验结果表明:直管型中心管俘获宽度比最高达到了70.25%,但通频带宽度窄;加长喇叭口型中心管略好于喇叭口型中心管;在喷咀比为0.02条件下,加长喇叭口型中心管浮体有较高双峰俘获宽度比,波峰为40.0%,波谷为31.6%,通频带宽,为随机波下高效转换创造了条件。最高俘获宽度比和双峰通频带特性实验数据结果都优于历史文献值。根据试验数据对一些适合小型海洋仪器供电的样机进行了设计,设计的样机具有较高的性价比。     

Field study of set-up effect in open-ended PHC pipe piles

Large-scale field tests were conducted to study set-up effect in open-ended prestressed high-strength concrete pipe piles jacked into stratified soil. Four open-ended prestressed high-strength concrete pipe piles with 13 and 18 m in embedment depth were fully instrumented with fiber Bragg grating sensors and installed. Several restrike dynamic tests were performed on each test pile, with the time interval from 21.5 to 284 hours after installation. Static loading tests (SLTs) were later performed on each test pile at 408 hours after installation to substantiate the dynamic tests. Changes with time in pile bearing capacity and in the shaft and toe resistances were studied based on the results of the pile tests. The development of shaft resistance set-up in different layers was studied in particular. It was found that set-up effect in the shaft resistance is significant and the toe resistance increment was minor. The overall set-up factor of total bearing capacity was found to range from 0.09 to 0.53, and the set-up effect of friction pile is much larger than the end bearing pile. More significant set-up in shaft resistance was observed in fill and alluvium layer. The dimensionless set-up factor A for shaft resistance in marine deposits ranges from 0.5 to 1.43, and it contributes the most to the shaft resistance as the shaft resistance in marine deposits is higher.     

软土地基上影响预应力钢筒混凝土管相对转角关键因素研究

预应力钢筒混凝土输水管线(PCCP)已广泛应用于地下输水工程,特别是南水北调工程。管道接口属于半刚性结构,相邻管道可产生一定的自由转角,在自由转角范围内两管之间不会产生内力。当相对转角大于自由转角时,两管会产生相互作用力,作用力过大会导致PCCP管的破坏,如何有效地控制不均匀软土地基上相邻管道转角成为研究管道安全的关键问题之一。首先分析了导致PCCP管线产生相对转角的机制,结合现场试验和数值分析对控制PCCP管线相对转角的关键因素进行研究。研究表明,相对转角的敏感因素为管道底部碎石垫层厚度、腰部以下砂垫层（砂包角）厚度和压实度,随着碎石垫层厚度增大、砂垫层（砂包角）厚度和压实度增加,管线相对转角降低,通过控制这3个因素可有效控制PCCP管的相对转角。研究成果可为软土地基上PCCP输水工程设计提供依据和指导。     

PTC管桩复合地基应力扩散效应研究

预应力混凝土薄壁（PTC）管桩复合地基作为常见的基础型式在软土地区具有良好的实用价值和应用前景。在实际工程中,复合地基下卧层附加应力的确定一直是重点和难点,因此对PTC管桩复合地基应力扩散效应的研究具有十分重要的意义。针对天津软土地区进行了3组不同垫层厚度的复合地基现场静载试验,基于现场试验建立并验证了数值模拟方法,对比研究了该型式复合地基的承载特性;通过已建立的数值模拟方法研究了不同工况下PTC管桩复合地基的应力扩散现象,结合复合地基应力扩散理论确定了扩散角的取值范围,分析了土质、加固深度和外荷载对扩散角的影响规律。计算结果可为工程设计提供依据。