Mechanical Characteristics of Light-Weighted Soils Using Dredged Materials

This study investigates the mechanical characteristics of light-weighted soils (LWS) consisting of expanded polystyrene (EPS), dredged clays, and cement through both unconfined and triaxial compression tests. The mechanical characteristics of the compressive strength of LWS are analyzed with varying initial water contents of dredged clays, EPS ratio, cement ratio, and curing pressure. In the triaxial compression test, it is found that the compressive strength of LWS associated with EPS is independent on the effective confining pressure. When both EPS ratio is less than 2% and cement ratio is more than 2%, the compressive strength rapidly decreases after the ultimate value. This signifies that the compressive strength-strain behavior is quite similar to that of the cemented soil. The ground improved by LWS has the compressive strength of 200 kPa associated with the optimized EPS ratio of 3-4% and initial water content of 165-175%. The ultimate compressive strength under both triaxial and unconfined compression tests is almost constant for a cement ratio of up to 2%.     

高速摄影对散体振动的研究

以现代高速摄影技术和图像分析以及数据处理方法，针对高效振动磨机中弹性散体工质（如钢棒、球体等）的振动力学进行了深入的探讨和分析，为研究散体动力学和振动超细粉碎过程中的能量分布和传递规律以及能量与物质的相互转换机理奠定了基础，也为相关学科的发展提供了一种可以借鉴的方法。     

矿物材料学的内涵与特征

经过20余年的研究与发展,矿物材料学已经成为材料科学与工程中一个相对独立和完善的组成部分,由于其定义、内涵与特征等基本问题与材料科学的从属性和独特性,多年的研究认为:矿物材料学是研究矿物材料的组成与结构、制备与合成、性能和使用效能以及矿物原料性质与特点等五要素及其相互关系和规律的一门学科.这五要素是具有内部互相联系和作用的有机整体,研究这五要素并了解它们之间的相互关系和规律构成了矿物材料学的内涵.矿物原料性质与特点是其他四要素的基本前提或重要基础,矿物原料及其与其他四要素的关系以及矿物在其他四要素中的关键性都体现了矿物材料学的矿物科学属性,正是因为兼具材料科学属性和矿物科学属性的矿物材料学这一重要特征使其有别于其他学科,而具有了理论及实用价值.     

Composition-Induced Variations in SIMS Instrumental Mass Fractionation during Boron Isotope Ratio Measurements of Silicate Glasses

An analytical artefact is reported here related to differences in instrumental mass fractionation between NIST SRM glasses and natural geological glasses during SIMS boron isotope determinations. The data presented demonstrated an average 3.4‰ difference between the NIST glasses and natural basaltic to rhyolitic glasses mainly in terms of their sputtering-induced fractionation of boron isotopes. As no matrix effect was found among basaltic to rhyolitic glasses, instrumental mass fractionation of most natural glass samples can be corrected by using appropriate glass reference materials. In order to confirm the existence of the compositionally induced variations in boron SIMS instrumental mass bias, the observed offset in SIMS instrumental mass bias has been independently reproduced in two laboratories and the phenomenon has been found to be stable over a period of more than one year. This study highlights the need for a close match between the chemical composition of the reference material and the samples being investigated.     

GGR Critical Review of Analytical Developments in 2004–2005

In 2005 Geostandards and Geoanalytical Research embarked upon a new initiative for its readers. Key researchers in various fields of geoanalytical technique development and their application were identified and invited to provide reviews pertinent to their expertise. As noted in the first of these publications "…instead of revisiting the historical context or decades of development in each analytical technique, the goal here has been to capture a snapshot of "hot topics" across a range of fields as represented in the… literature" (Hergt et al . 2005). Rather than prepare an annual review, a decision was taken earlier this year to provide a biennial summary of progress and accomplishments, in this case for the years 2004–2005. The principal techniques employed in Earth and environmental sciences are covered here, and include laser ablation and multicollector ICP-MS, ICP-AES, thermal ionisation and secondary ion mass spectrometry, as well as neutron activation analysis, X-ray fluorescence and atomic absorption spectrometry. A comprehensive review of the development of reference materials, often essential to these techniques, is also provided. The contributions assembled serve both to keep readers informed of advances they may be unfamiliar with, but also as a means of showcasing examples of the breadth and depth of work being conducted in these fields.     

Reference Materials in Geoanalytical Research -Review for 2004 and 2005

This review gives an overview of the use and development of reference materials of geochemical and environmental interest in the literature of the years 2004 and 2005. In these years the performance of existing methods has been improved and new geochemical applications using new techniques have been developed. Accordingly, there was an increasing need for new reference materials, especially for in situ microanalysis and for precise stable isotope measurements. In addition, there was a notable trend for further characterisation of existing reference materials, mainly for the platinum-group elements. This review focuses on five topics: reference materials for platinum-group elements, reference glasses for in situ microanalysis, zircon reference materials, isotopic reference materials, and the development and certification of reference materials.     

Structural Evolvement of Heating Treatment of Mg/AI-LDH and Preparation of Mineral Mesoporous Materials

Although hydrotalcite, or layered double hydroxides （LDHs）, is not a common mineral, it is an important material that can be easily synthesized in laboratory. In this study, structural evolvement and BET surface area changes of heat treated Mg/AI-LDH is evaluated by XRD, TEM and N2-BET analyses. The results indicate that the magnesium-aluminum LDH with carbonate as interlayer anion, periclase-like oxides was formed at temperatures of 400-800℃. Meanwhile, 2-3 nanometer mesoporous were formed during decomposition of LDH. However, the heat treated samples still preserve the morphology of the original LDH plates. Periclase-like formed from LDH heat treatment may re-hydrolyze and recover the structure of LDH. However, crystallinity of the recovered LDH is lower than that of the original LDH. This heat treatment will result in formation of （Mg, Al）-oxide nano-crystals and nanopores among the nano-crystals. When heating temperature exceeds 1000, the periclase-like （Mg, Al）-oxide is transformed into a composite with periclase （MgO） and spinel phases. The periclase can be re-hydrolyzed and dissolved in HCl solution. After acid treatment, the sample with a high surface area is composed of spinel nano-crystals and nanopores among them. Our results will provide a new and economic way to synthesize mesoporous materials through pathways of phase transformation of precursor materials with different composition.     

Determining Q of near-surface materials from Rayleigh waves

High-frequency (≥2 Hz) Rayleigh wave phase velocities can be inverted to shear (S)-wave velocities for a layered earth model up to 30 m below the ground surface in many settings. Given S-wave velocity (V_S), compressional (P)-wave velocity (V_P), and Rayleigh wave phase velocities, it is feasible to solve for P-wave quality factor Q_P and S-wave quality factor Q_S in a layered earth model by inverting Rayleigh wave attenuation coefficients. Model results demonstrate the plausibility of inverting Q_S from Rayleigh wave attenuation coefficients. Contributions to the Rayleigh wave attenuation coefficients from Q_P cannot be ignored when Vs/V_P reaches 0.45, which is not uncommon in near-surface settings. It is possible to invert Q_P from Rayleigh wave attenuation coefficients in some geological setting, a concept that differs from the common perception that Rayleigh wave attenuation coefficients are always far less sensitive to Q_P than to Q_S. Sixty-channel surface wave data were acquired in an Arizona desert. For a 10-layer model with a thickness of over 20 m, the data were first inverted to obtain S-wave velocities by the multichannel analysis of surface waves (MASW) method and then quality factors were determined by inverting attenuation coefficients.     

地下管线探测工程的资料自动化整理

地下管线探测工程一般分为野外探测和室内资料整理两阶段。内业整理包括成果表的编制、管线综合分布平面图和管线数据库。由于管线探测工程数据多,为了充分利用外业探测成果,应用Visual Basic 6.0(VB6)开发了一套地下管线管理信息系统(UTMIS),该系统实现了地下管线探测工程内业整理的自动化,极大地提高了工作效率数据精确度。