First six months quality assessment of HY-2A SCAT wind products using in situ measurements

The first Chinese microwave ocean environment satellite HY-2A, carrying a Ku-band scatteromenter （SCAT）, was successfully launched in August 2011. The first quality assessment of HY-2A SCAT wind products is presented through the comparison of the first 6 months operationally released SCAT products with in situ data. The in situ winds from the National Data Buoy Center （NDBC） buoys, R/V Polarstern, Aurora Australis, Roger Revelle and PY30-1 oil platform, were converted to the 10 m equivalent neutral winds. The temporal and spatial differences between the HY-2A SCAT and the in situ observations were limited to less than 5 min and 12.5 km. For HY-2A SCAT wind speed products, the comparison and analysis using the NDBC buoys yield a bias of-0.49 m/s, a root mean square error （RMSE） of 1.3 m/s and an increase negative bias with increasing wind speed observation above 3 m/s. Although less accurate of HY-2A SCAT wind direction at low winds, the RMSE of 19.19° with a bias of 0.92° is found for wind speeds higher than 3 m/s. These results are found consistent with those from R/Vs and oil platform comparisons. Moreover, the NDBC buoy comparison results also suggest that the accuracy of HY-2A SCAT winds is consistent over the first half year of 2012. The encouraging assessment results over the first 6 months show that wind products from HY-2A SCAT will be useful for scientific community.     

Simultaneous Ocean Wave Measurements by the Jason and Topex Satellites,with Buoy and Model Comparisons Special Issue: Jason-1 Calibration/Validation

The verification phase of the Jason-1 satellite altimeter mission presents a unique opportunity for comparing near-simultaneous, independent satellite measurements. Here we examine simultaneous significant wave height measurements by the Jason-1 and TOPEX/Poseidon altimeters. These data are also compared with in situ measurements from deep-ocean buoys and with predicted wave heights from the Wave Watch III operational model. The rms difference between Jason and TOPEX wave heights is 28 cm, and this can be lowered by half through improved outlier editing and filtering of high-frequency noise. Noise is slightly larger in the Jason dataset, exceeding TOPEX by about 7 cm rms at frequencies above 0.05 Hz, which is the frequency at which the coherence between TOPEX and Jason measurements drops to zero. Jason wave heights are more prone to outliers, especially during periods of moderate to high backscatter. Buoy comparisons confirm previous reports that TOPEX wave heights are roughly 5% smaller than buoy measurements for waves between 2 and 5 m; Jason heights in general are 3% smaller than TOPEX. Spurious dips in the TOPEX density function for 3- and 6-m waves, a problem that has existed since the beginning of the mission, can be solved by waveform retracking.     

空间变异对海洋叶绿素a质量浓度遥感产品精度验证的影响

海洋叶绿素a质量浓度遥感产品是海洋初级生产力与海洋生态系统固碳能力研究的重要数据源,为了保证数据的可靠性,对遥感产品进行精度验证以及验证误差的成因分析尤为重要.遥感产品的验证过程中,由于空间变异的存在,使得遥感像元尺度内的实测数据具有不同的离散程度和统计分布特征,并由此产生了不同的误差统计结果.本文选择MODIS-Aq...     

Long-Term Validation of Wave Height Measurements from Altimeters

Since July 1991, six altimeter missions have been launched successfully, and they have provided almost continuous wave height measurements for more than 12 years. Long-term series of wave height measurements are of major interest for climatology and oceanic wave modeling. Before using such data, the measurements have to be validated, and the homogeneity of the data from various satellites has to be checked. Significant wave height measurements from ERS, TOPEX/Poseidon, GEOSAT Follow-on, Jason-1 and ENVISAT altimeters are validated using cross-altimeter and buoy comparisons. Emphasis is put on the two recent missions Jason-1 and ENVISAT. Corrections for biases and trends are proposed for the six altimeters, allowing the generation of consistent and homogeneous data. Tests of these corrections are performed over global ocean simple statistics.     

Limnology of Bird Pond,Ross Island,Antarctica

The physical, chemical and biological properties of Bird Pond, Cape Bird, Ross Island, Antarctica (77° 13’ 10” S, 166° 28’ 30” E), were investigated at weekly intervals for 2 months in the summer of 1970–71. The above properties were also investigated over a 24‐h period. Salinity and temperature tolerance of the rotifer Philodina gregaria were investigated in the laboratory at Cape Bird.

Bird Pond is characterised by a high conductivity and chloride ion concentration, and an alkaline pH. It has a water temperature as high as 15°c in mid summer, with the bottom water temperature often 3°c higher than the surface temperature. Diurnal measurements suggest a vertical movement of phytoplankton during a 24‐h period. P. gregaria survives ionic concentrations up to 250 000 g.m^‐3 Na⁺ + Cl^‐, and water temperatures up to 32°c.     

Comparison of AVHRR measurements of sea surface temperature with surface observations around New Zealand

Multi‐channel Advanced Very‐High Resolution Radiometer (AVHRR) images of sea surface temperature (SST) in the New Zealand region have been archived since 1989. A comparison of these data with conductivity‐temperature‐depth (CTD) and expendable bathythermograph (XBT) data shows that the AVHRR temperatures are about 7% too high (when expressed in °C). Once the AVHRR temperatures have been corrected, they measure SST with an uncertainty of about 0.7°C.     

海洋光学遥感器的辐射定标与数据真实性检验综述

遥感数据定量化应用遥感技术深入发展亟须解决的重要课题,对遥感器进行辐射定标,对遥感数据进行真实性检验的工作已在深入开展,本文介绍了国际关于定标／真实性检验的组织及分工概况,简要阐述了定标／真实性检验的概念与做法,着重讨论了与海洋光学遥感器有关的辐射定标／真实性检验,综述了国外在这方面的若干做法,并在我们工作的基础上提出了开展此项工作的几个关键问题及中能解决的途径。     

不同插值方法在海域气象参数估算中的可靠性评价

海域条件下的气象观测具有数据稀少、变化大且观测站点分布不均的特点,其插值精度受插值方法影响较大。首先对常规插值方法进行理论分析,进而选取了反距离加权法、克里金法和样条函数法三种插值方法进行了插值实验和精度分析。根据渤海湾某区域的气象历史数据,采用不同方法绘制了温度、压强和湿度的插值平面图,并基于交叉验证的方式对各插值方法进行了对比,给出了不同方法的插值估算可靠性评价。结果表明:温度、压强和湿度的插值精度均是基于反距离加权法的插值结果最优(MAE_(温度)=2.42,RMSE_(温度)=1.92,MAE_(压强)=2.05,RMSE_(压强)=1.30,MAE_(湿度)=11.394, RMSE_(压强)=6.43),同时基于反距离加权法的图形绘制可视化效果也要优于其他两种方法。研究结果可为海域气象参数估算提供理论和实践依据。     

Global Statistical Assessment and Cross-Calibration with Jason-2 for Reprocessed HY-2 A Altimeter Data

HY-2 A (Haiyang-2 A) satellite was launched on August 16, 2011 and radar altimeter is one of its main payloads. We reprocessed two years of HY-2 A altimeter sensor geophysical dataset records (SGDR) data. This paper presents the main results in terms of reprocessed HY-2 A altimeter data quality: verification of data availability and validity, monitoring several relevant altimeter parameters, and assessment of the HY-2 A altimeter system performances. A cross-calibration analysis of reprocessed HY-2 A altimeter data with Jason-2 was conducted. The reprocessed HY-2 A altimeter data show good quality and have a low level of noise with respect to Jason-2. The same geophysical correction methods were used to calculate the sea surface height (SSH) for the two missions. The mean standard deviations of the crossover differences for HY-2 A and Jason-2 are 5.24 cm and 5.34 cm, respectively. The mean standard deviation of the crossover differences between HY-2 A and Jason-2 is 5.37 cm. These show that HY-2 A can provide SSH measurements at almost the same level of accuracy as Jason-2. The relative SSH bias between HY-2 A and Jason-2 due to the Ultra Stable Oscillator (USO) drift is obviously observed, and it can affect the calculation of mean sea level and should be further studied and corrected.     

A New Retracking Technique for Brown Peaky Altimetric Waveforms

A new Brown-Peaky (BP) retracker has been developed for peaky waveforms that usually appear within ～10 km to the coastline. The main feature of the BP is that it fits peaky waveforms using the Brown model without introducing a peak function. The retracking strategy first detects the peak location and width of a waveform using an adaptive peak detection method, and then estimates retracking parameters using a weighted least squares (WLS) estimator. The WLS assigns a downsized weight to corrupted waveform gates, but an equal weight to other normal waveform gates. The BP retracker has been applied to 4-year Jason-1 waveform (2002–2006) in two Australian coastal zones. The results retracked by BP, MLE4 and ALES retrackers have been validated against tide-gauge observations located at Burnie, Lorne and Broome. The comparison results show that three retrackers have similar performance over open oceans with the correlation coefficient (～0.7) and RMSE (～13 cm) between altimetric and tide-gauge sea levels for distance >7 km offshore. The main improvement of BP retracker occurs for distance ≤7 km to the coastline, where validation results indicate that data retracked by BP are more accurate (15–21 cm) than those by ALES (16–24 cm) and MLE4 (19–37 cm).