Revision of the conchostracan genera Cratostracus and Porostracus from Cretaceous deposits in north-east China

The diagnoses of the conchostracan genera Cratostracus and Porostracus are revised following a re-examination of their type species under a scanning electron microscope. In Cratostracus each growth line has a serrated lower margin. Radial lirae branch into smaller ridges that merge with each other to give the upper part of each growth band in the ventral region of the carapace a slightly undulating surface. Cross-bars are present between these lirae. In Porostracus the radial lirae on the growth bands near the umbo are long and relatively widely spaced. There is a fine reticulum between them in the umbonal part of the carapace and cross-bars on the ventral surface. The ornament of Porostracus indicates that it can be assigned to the family Halysestheriidae rather than to the Afrograptidae, in which it has been placed previously. Morphological analysis of most of the species of the two genera and closely related Orthestheria (Migransia) under the scanning electron microscope is required before their stratigraphic potential can be fully realized.     

Latest Jurassic–earliest Cretaceous radiolarian fauna from the Xialu chert in the Yarlung Zangbo suture zone, southern Tibet: Comparison with coeval western Pacific radiolarian faunas and paleoceanographic implications

Abstract The Xialu chert radiolarian fauna is latest Jurassic–earliest Cretaceous in age (Pseudodictyomitra carpatica zone) and contains many taxa in common with coeval northern hemisphere middle‐latitude (temperate) radiolarian faunas represented by the Torinosu fauna in southwest Japan. Common elements include Eucyrtidiellum pyramis (Aita), Protunuma japonicus Matsuoka & Yao, Sethocapsa pseudouterculus Aita, Sethocapsa (?) subcrassitestata Aita, Archaeodictyomitra minoensis (Mizutani), Stichocapsa praepulchella Hori and Xitus gifuensis (Mizutani). The Xialu fauna is less similar to low‐latitude (tropical) assemblages represented by the Mariana fauna. For this reason, the Xialu fauna is regarded as representative of a southern hemisphere middle‐latitude (temperate) fauna. A mirror‐image bi‐temperate provincialism to the equator in radiolarian faunas is reconstructed for the Ceno‐Tethys and Pacific Ocean in latest Jurassic–earliest Cretaceous time.     

Revision of the conchostracan genus Estherites from the Upper Cretaceous Nenjiang Formation of the Songliao Basin and its biogeographic significance in China

The diagnosis of Estherites corrugatus from the basal part of the Coniacian Second Member of the Nenjiang Formation in Nenjiang County, north-east China is revised following the application of a new preparation technique to some of the carapaces and an examination of specimens under a scanning electron microscope, both of which revealed morphological features on the carapace that had not been recognized previously. Restudy of the type species of the two subgenera Estherites (Euestherites) and Estherites (Parestherites) also revealed details of carapace features not seen hitherto. These indicate that they should be separated from Estherites. As a result, Euestherites is upgraded to genus level and Parestherites is placed in synonymy. The importance of Estherites and Euestherites is considered in the context of Late Cretaceous assemblages of these crustaceans and the three conchostracan provinces (South-West, South-East and North China) that are recognized to have been present in China during the Turonian–Santonian period.     

STRUCTURAL GEOLOGY

正20141283 Bai Daoyuan(Hunan Institute of Geological Survey,Changsha 410016,China);Zhong Xiang Nature,Origin and Tectonic Setting of Jinzhou Basin in the South Segment of Xuefeng Orogen(Geology in China,ISSN1000-3657,CN11-1167/P,40(4),2013,p.1079-1091,10 illus.,47 refs.)Key words:foreland basins,strike-slip faults,Hunan Province     

Tectono-sedimentary control on modern sand deposition on the forebulge of the Western Taiwan Foreland Basin

Whether the formation of the isolated sand body deposition in the forebulge area of a foreland basin system is structure- or deposition-controlled has puzzled geologists for decades, although sand body deposition is generally believed to be indicative of the position of the flexural forebulge in a foreland basin. The formation of a modern sand body in the forebulge area is thus examined by multi-scale geophysical observations based on combined reflection seismic profiles and compressed high-intensity radar pulse (CHIRP) profiles across the sand deposition along the forebulge of the Western Taiwan Foreland Basin (WTFB), which is a Late Miocene-present foreland basin in the overfilled stage. These profiles suggest that the accumulation of the sand deposits along the forebulge of the WTFB is not directly associated with forebulge faultings. The relief map of the forebulge deposit substratum shows a northwestward tilting slope, and the isopach of the forebulge sand body indicates that a large part of the sand body accumulated along the axis of the Taiwan Strait and the subdued forebulge of the WTFB. The difference between the prevailing directions of tidal currents between the Taiwan Strait and the East China Sea reflects the probable sedimentary influence of the cratonward migrating fold-thrust belt within a foreland shelf. We suggest that the formation and distribution of the sand deposits along the forebulge of the WTFB are generally controlled not only by the transverse downslope sedimentation but also longitudinal hydrodynamic processes at distal parts of the foreland basin. Our explanation provides a plausible tectono-sedimentary cause of the sand body deposition in the forebulge area in an overfilled foreland basin. The sedimentary dynamics of the sand body in the Taiwan Strait may be applicable for understanding the formation of isolated sand bodies in the distal part of the Cretaceous Western Interior Foreland Basin.     

A newly defined Late Ordovician magmatic‐thermal event in the Mt Painter Province,northern Flinders Ranges,South Australia

Magmatism,metamorphism and metasomatism in the Palaeoproterozoic‐Mesoproterozoic Mt Painter Inlier and overlying Neoproterozoic Adelaidean rocks in the northern Flinders Ranges (South Australia) have previously been interpreted as resulting from the ca 500 Ma Delamerian Orogeny. New Rb–Sr, Sm–Nd and U–Pb data, as well as structural analysis,indicate that the area also experienced a second thermal event in the Late Ordovician (ca 440 Ma). The Delamerian Orogeny resulted in large‐scale folding, prograde metamorphism and minor magmatic activity in the form of a small volume of pegmatites and leucogranites. The Late Ordovician event produced larger volumes of granite (the British Empire Granite in the core of the inlier) and these show Nd isotopic evidence for a mantle component. The high‐temperature stage of this magmatic‐hydrothermal event also gave rise to unusual diopside‐titanite veins and the primary uranium mineralisation in the basement, of which the remobilisation was younger than 3.5 Ma. It is possible that parts of the Mt Gee quartz‐hematite epithermal system developed during the waning stages of the Late Ordovician event. We suggest that the Ordovician hydrothermal system was also the cause of the commonly observed retrogression of Delamerian metamorphic minerals (cordierite, andalusite) and the widespread development of actinolite, scapolite, tremolite and magnetite in the cover sequences. Deformation during the Late Ordovician was brittle. The recognition of the Late Ordovician magmatic‐hydrothermal event in the Mt Painter Province might help to link the tectonic evolution of central Australia and the southeast Australian Lachlan Fold Belt.     

Structural geometry and controls on basement‐involved deformation in the northern Flinders Ranges,Adelaide Fold Belt,South Australia

In the northern Flinders Ranges, Neoproterozoic and Cambrian sedimentary rocks were deformed and variably metamorphosed during the ca 500 Ma Cambro‐Ordovician Delamerian Orogeny. Balanced and restored structural sections across the northern Flinders Ranges show shortening of about 10–20%. Despite the presence of suitable evaporitic detachment horizons at the basement‐cover interface, the structural style is best interpreted to be thick‐skinned involving basement with only a minor proportion of the overall shortening accommodated along stratigraphically controlled detachments. Much of the contractional deformation was localised by the inversion of former extensional faults such as the Norwest and Paralana Faults, which both controlled the deposition of Neoproterozoic cover successions. As such, both faults represent major, long‐lived structures which effectively define the present boundaries of the northern Flinders Ranges with the Gawler Craton to the west and the Curnamona Craton to the east. The most intense deformation, which resulted in exhumation of the basement along the Paralana Fault to form the Mt Painter and Babbage Inliers, coincides with extremely high heat flows related to extraordinarily high heat‐production rates in the basement rocks. High heat flow in the northern Flinders Ranges suggests that the structural style not only reflects the pre‐Delamerian basin architecture but is also a consequence of the reactivation of thermally perturbed, weakened basement.     

Upper Cretaceous marine‐continental transition (Leonese Area,NW Spain) defined from integrated outcrop and seismic stratigraphy

The Upper Cretaceous succession of the Leonese Area (NW Spain) comprises mixed clastic and carbonate sediments. This succession is divided into two lithostratigraphic units, the Voznuevo Member and the Boñar Formation, which represent fluvial, shoreface, intertidal, subtidal and open‐shelf sedimentary environments. Regional seismic interpretation and sequence stratigraphic analysis have allowed the study of lateral and vertical changes in the sedimentary record and the definition of third‐order levels of stratigraphic cyclicity. On the basis of these data, the succession can be divided into two second‐order depositional sequences (DS‐1 and DS‐2), incorporating three system tracts in a lowstand to transgressive to highstand system tract succession (LST–TST–HST). These sequences are composed of fluvial systems at the base with palaeocurrents that flowed westward and south‐westward. The upper part of DS‐1 (Late Albian–Middle Turonian) shows evidence of intertidal to subtidal and offshore deposits. DS‐2 (Late Turonian–Campanian) comprises intertidal to subtidal, tidal flat, shallow marine and lacustrine deposits and interbedded fluvial deposits. Two regressive–transgressive cycles occurred in the area related to eustatic controls. The evolution of the basin can be explained by base‐level changes and associated shifts in depositional trends of successive retrogradational episodes. By using isobath and isopach maps, the main palaeogeographic features of DS‐1 and DS‐2 were constrained, namely coastline positions, the existence and orientation of corridors through which fluvial networks were channelled and the location of the main depocentres of the basin. Sedimentation on the Upper Cretaceous marine platform was mainly controlled by (i) oscillations of sea level and (ii) the orientation of Mesozoic faults, which induced sedimentation along depocentres. Copyright © 2013 John Wiley & Sons, Ltd.     

Isotope geochemistry and Re–Os geochronology of the Yanjiagou Mo deposit in the central North China Craton

The Yanjiagou deposit, located in the central North China Craton (NCC), is a newly found porphyry‐type Mo deposit. The Mo mineralization here is spatially associated with the Mapeng batholith. In this study, we identify four stages of ore formation in this deposit: pyrite phyllic stage (I), quartz–pyrite stage (II), quartz–pyrite–molybdenite stage (III), which is the main mineralization stage, and quartz–carbonate stage (IV). We present sulphur and lead isotope data on pyrite, and rhenium and osmium isotopes of molybdenite from the porphyry deposit and evaluate the timing and origin of ore formation. The δ³⁴S values of the pyrite range from ‐1.1‰ to −0.6‰, with an average of −0.875‰, suggesting origin from a mixture of magmatic/mantle sources and the basement rocks. The Pb isotope compositions of the pyrite show a range of 16.369 to 17.079 for ²⁰⁶Pb/²⁰⁴Pb, 15.201 to 15.355 for ²⁰⁷Pb/²⁰⁴Pb, and 36.696 to 37.380 for ²⁰⁸Pb/²⁰⁴Pb, indicating that the ore‐forming materials were derived from a mixture of lower crust (or basement rocks) and mantle. Rhenium contents in molybdenite samples from the main ore stage are between 74.73 to 254.43 ppm, with an average of 147.9 ppm, indicating a mixed crustal‐mantle source for the metal. Eight molybdenite separates yield model ages ranging from 124.17 to 130.80 Ma and a mean model age of 128.46 Ma. An isochron age of 126.7 ± 1.1 Ma (MSWD = 2.1, initial ¹⁸⁷Os = 0.0032 ± 0.0012 ppb) is computed, which reveals a close link between the Mo mineralization and the magmatism that generated the Mapeng batholith. The age is close to the zircon U–Pb age of ca. 130 Ma from the batholith reported in a recent study. The age is also consistent with the timing of mineralization in the Fuping ore cluster in the central NCC, as well as the peak time of lithosphere thinning and destruction of the NCC. We evaluate the spatio‐temporal distribution of the Mo deposits in the NCC and identify three important molybdenum provinces along the northern and southern margins of the craton formed during three distinct episodes: Middle to Late Triassic (240–220 Ma), Early Jurassic (190–175 Ma), and Late Jurassic to Early Cretaceous (150–125 Ma). The third period is considered to mark the most important metallogenic event, coinciding with the peak of lithosphere thinning and craton destruction in the NCC. Copyright © 2014 John Wiley & Sons, Ltd.     

Development of large‐scale seismites in Upper Cretaceous fluvial sandstones in a fault‐proximal setting

Large‐scale soft‐sediment deformation structures occur within fluvial sandstone bodies of the Upper Cretaceous Wahweap Formation in the Kaiparowits basin, southern Utah, USA. These structures represent an exceptional example of metre‐scale fault‐proximal, seismogenic load structures in nearly homogenous sandstones. The load structures consist of two types: large‐scale load casts and wedge‐shaped load structures. Large‐scale load casts penetrate up to 4·5 m into the underlying sandstone bed. Wedge‐shaped load structures include metre‐scale, parallel, sub‐vertical features and decimetre‐scale features along the periphery of the large‐scale load casts or other wedge‐shaped load structures. Wedge‐shaped load structures contain well‐developed, medial cataclastic shear deformation bands. All load structures contain pervasive well‐defined millimetre‐thick to centimetre‐thick internal laminae, oriented parallel to the outside form of the load structures and asymptotic to deformation bands. Both types of load structures formed because of an inverted density profile, earthquake‐triggered liquefaction and growth of irregularities (a Rayleigh–Taylor instability) on the sandstone–sandstone erosional contact. The internal laminae and deformation bands formed during deformation and clearly demonstrate polyphase deformation, recording a transition from liquefied to hydroplastic to brittle modes of deformation. Decimetre‐scale wedge‐shaped load structures on the edge of the large‐scale load casts probably formed towards the end of a seismic event after the sediment dewatered and increased the frictional contact of grains enough to impart strength to the sands. Metre‐scale wedge‐shaped load structures were created as the tips of downward foundering sediments were driven into fractures, which widened incrementally with seismic pulsation. With each widening of the fracture, gravity and a suction effect would draw additional sediment into the fracture. Superimposed laminae indicate a secondary syndeformational origin for internal laminae, probably by flow‐generated shearing and vibrofluidization mechanisms. Large‐scale and wedge‐shaped load structures, polyphase deformation and secondary laminae may characterize soft‐sediment deformation in certain fault‐proximal settings.