流塑淤泥地层深基坑钢板桩围堰位移突变原因分析及处理

广东省珠海市洪鹤大桥主墩承台位于珠江西江流域的流塑状淤泥地层,采用钢板桩围堰进行基坑支护,基坑开挖过程中,钢板桩围堰发生较大的变形。经详细分析,发现导致事故的主要原因有地下水位持续升高导致土体力学性能显著下降、边跨侧钢板桩长度不足、基坑边缘集中荷载过大、施工控制不严、内支撑体系施工精度不足等。为了确保深基坑支护的安全,在全面分析总结了钢板桩围堰变形原因的基础上,结合实际情况,采取了增设穿透淤泥质土层的钢管桩围堰、加强内支撑体系等加固处理措施,并在实施过程中进行持续监测,最终安全地完成了基坑工程的施工。     

Geochemistry and detrital zircon U–Pb dating of Pliocene-Pleistocene sandstones of the Chittagong Tripura Fold Belt (Bangladesh): Implications for provenance

The Bengal Basin originated during the collision of India with Eurasia and Burma. The provenance analysis of the Chittagong Tripura Fold Belt (CTFB), which is the folded eastern flank of the Bengal Basin as well as the Neogene belt of the Indo-Burman Ranges (IBR) is key to better understand the possible sources of sediment input from the complex interplay of the Indian, Eurasian and Burma plates. We report new whole rock geochemical and detrital zircon U–Pb data from the upper Neogene sandstones of Tipam-Dupi Tila formations (Pliocene to Plio-Plestocene succession) from the CTFB. Detrital zircon U–Pb age spectra show three predominant peaks at <200 Ma, 480–650, ∼800–1000 Ma. The geochemical discriminations and elemental ratios of Eu/Eu* (∼0.70), La/Sc (∼16.13), La/Co (∼15.76), Th/Sc (∼2.95), La/Th (∼5.67), Th/Co (∼2.87), Cr/Th (∼4.63) as well as Chondrite-normalized REE patterns with flat HREE, LREE enrichment, and negative Eu anomalies for the Tipam and Dupi Tila formations are suggestive of a dominantly felsic source area experiencing moderate to intensive chemical weathering (Chemical index of alteration, CIA - 57 to 81) and have a recycled provenance orogen related to active continental or passive margin settings. Integrated geochemical and zircon U–Pb studies reveal that the main sediment input might have been from the Himalayan orogen with significant arc-derived detritus, possibly from the Gangdese arc as well as from the Burma magmatic arc.     

Temporal and spatial variation of soil erosion in wooded rangelands of southwest Spain

Changes in land use are common in Mediterranean areas and are reported as having produced changes in the intensity of soil erosion. Dehesas are rangelands with a disperse tree cover, widespread in the south-western part of the Iberian Peninsula and similar ecosystems are also common in other areas with a Mediterranean climate. The aim of the present study is to analyse temporal and spatial variations of soil erosion rates estimated along three hillsides, located in two farms (Buitrera and Parapuños) in southwest Spain. To understand the temporal variation, soil erosion rates were studied in light of land use-management changes that took place during the last few centuries. Results indicate very low erosion rates prior to the 18^th century in both farms. In Buitrera, a first increase of soil loss rates was identified during the period 1831-1897, amounting to 7.4 t ha^-1 y^-1. A further increase took place during the 20^th century, reaching a mean erosion rate of 29.1 t ha^-1 y^-1. In Parapuños, data points to a significant increase from 1881 onwards, with an estimated mean erosion rate of 18.5 t ha^-1 y^-1. Those increases were presumably connected with an intensification of land use, such as cultivation and excessive livestock populations. Regarding spatial variation, the bare surface and the erosive power of run-off along the hillsides accounts for 76% of the soil erosion rates dispersion. At a local scale, the variability of erosion rates could not be explained, because of (i) uncertainty related to the micromorphology of the past soil surface and (ii) the role of tillage erosion in the past. However, the results obtained offer valuable data on the temporal and spatial variation of erosion rates in dehesas at the hillslope scale and a similar approach could be used for other rangelands with a disperse tree cover. © 2019 John Wiley & Sons, Ltd.     

Radar isochronic layer dating for a deep ice core at Kunlun Station,Antarctica

The ages and accumulation rates of ice are important boundary conditions for paleoclimatic ice models. Radardetected isochronic layers can be used to date the ice column beneath the ice surface and infer past accumulation rates. A Deep Ice-Core Drilling Project has been carried out at Kunlun station in the Dome A region, East Antarctica. Radio echo sounding data are collected during the 2004/2005 Chinese National Research Expedition and the 2007/2008 Dome Connection East Antarctica project of the Alfred Wegener Institute(Germany). Radar isochronic layers from the dataset were linked to compare a new deep ice core site from Kunlun station and the Vostok ice core site. Ten visible layers, accounting for ~50% ice thickness at the Kunlun station ice core site, were dated based on the Vostok ice core chronology. At 1,640 m depth below surface, an age of ~160,400 yr was determined, corresponding to a bright layer at Kunlun station. These layers provided geometric information on the past surface of the ice sheet around the ice core site through the Wisconsin glacial stage, Eemian interglacial and Marine Isotope Stage6. Based on a simple ice flow model and the age-depth relationship, we concluded that the region around the Kunlun ice core site had lower past accumulation rates, consistent with the present pattern. The age-depth relationship would thus be expected to correlate and constrain the chronology of the deep ice core at Kunlun station in the future.     

基于GIS的中山站至Dome A冰盖考察数据处理和信息提取

中山站至DomeA冰川学考察断面是国际ITASE计划的核心断面之一。首次利用GIS开展了该断面的数据处理与信息提取 ,采样点的布设与管理。介绍了ADD数字地图拼接与裁剪 ,野外数据和BEDMAP数据地理坐标投影变换的方法。利用ArcView内插等高线方法对GPS导航仪高程数据进行了校正。沿考察路线提取了BEDMAP的冰下基岩高程和冰厚度数据 ,以及冰盖表面的坡度与坡向数据。指出应进一步开展该断面以及兰伯特冰川盆地GIS应用研究。     

基于星载激光测高估计南极冰盖高程变化

利用NSIDC公布的ICESat运行期间的19个任务期的观测数据, 采用重复轨迹分析方法估计近年来南极冰盖高程的时空变化。结果表明,南极大陆冰盖整体上呈现消融趋势,基于不同的GIA模型和ICESat激光测高数据的南极大陆冰盖高程变化的趋势约为 -1.17~-1 cm/a。     

Supraglacial melt channel networks in the Jakobshavn Isbræ region during the 2007 melt season

Supraglacial channels are an important mechanism for surface water transport over the ablation zone of western Greenland. The first assessment of the spatio‐temporal distribution of surface melt channels and their relationship to supraglacial lakes over the Jakobshavn Isbræ region of Western Greenland was analysed using Landsat Enhanced Thematic Mapper Plus panchromatic images during the 2007 melt season. A total of 1188 melt channels were delineated and show an increase in the number of melt channels throughout the season, reaching a peak on 9 August. Water‐filled melt channels advanced to a maximum elevation of 1647 m on 9 August and attained a minimum average slope of 0.009 on 8 July. The ablation zone demonstrates two hydrologic modes, where crevasse and moulin terminating channels dominate at elevations <800 m and higher‐order channel networks >800 m. Development of higher‐order networks is interrupted by flow divergence due to partitioning of melt water into vertical infiltration through moulins and crevasse fields prevalent at lower elevations. Tributary and connector networks between 800 and 1200 m in elevation are correlated with fewer lake occurrences, lower surface velocities (~50 m a^?1), and ice flow dominated by internal deformation over basal sliding. High‐order channels are associated with lake basins that exceed melt water storage capacity. Evolution of channel networks is coupled to changes in melt water production, runoff, and ice dynamics with implication for the englacial and subglacial environments. © 2013 The Authors. Hydrological Processes Published by John Wiley & Sons, Ltd.     

Changes of soil surface roughness under water erosion process

The objective of this study was to determine the changing characteristics of soil surface roughness under different rainfall intensities and examine the interaction between soil surface roughness and different water erosion processes. Four artificial management practices (raking cropland, artificial hoeing, artificial digging, and contour tillage) were used according to the local agriculture customs of the Loess Plateau of China to simulate different types of soil surface roughness, using an additional smooth slope for comparison purposes. A total of 20 rainfall simulation experiments were conducted in five 1 m by 2 m boxes under two rainfall intensities (0.68 and 1.50 mm min^?1) on a 15° slope. During splash erosion, soil surface roughness decreased in all treatments except raking cropland and smooth baseline under rainfall intensity of 0.68 mm min^?1, while increasing for all treatments except smooth baseline under rainfall intensity of 1.50 mm min^?1. During sheet erosion, soil surface roughness decreased for all treatments except hoeing cropland under rainfall intensity of 0.68 mm min^?1. However, soil surface roughness increased for the artificial hoeing and raking cropland under rainfall intensity of 1.50 mm min^?1. Soil surface roughness has a control effect on sheet erosion for different treatments under two rainfall intensities. For rill erosion, soil surface roughness increased for raking cropland and artificial hoeing treatments, and soil surface roughness decreased for artificial digging and the contour tillage treatments under two rainfall intensities. Under rainfall intensity of 0.68 mm min^?1, the critical soil surface roughness was 0.706 cm for the resistance control of runoff and sediment yield. Under rainfall intensity of 1.50 mm min^?1, the critical soil surface roughness was 1.633 cm for the resistance control of runoff, while the critical soil surface roughness was 0.706 cm for the resistance control of sediment yield. These findings have important implications for clarifying the erosive nature of soil surface roughness and harnessing sloped farmland. Copyright © 2013 John Wiley & Sons, Ltd.     

四种南极数字高程模型的精度比较与分析

南极数字高程模型（DEM）是南极冰盖研究的基础数据,目前国际通用的全南极DEM数据主要有JLB97 DEM、RAMPv2 DEM、ICESat DEM以及Bamber 1km DEM. 利用DEM对DEM验证的方式对四种DEM的精度进行比较分析. 结果表明：Bamber 1km DEM和ICESat DEM之间的高程差异最小,平均高程差小于1.8 m,二者均有较高的可靠性. RAMPv2 DEM与Bamber 1km DEM的高程差大于1.9 m,在81.5° S以南和坡度较大的区域,高程差异更为明显,高程可靠性较低. JLB97 DEM与上述三种DEM的偏差超过10 m,高程可靠性最低.     

长事务缓冲区同步接边法

数字地形图的接边问题实质是对两幅地形图的同步操作问题,提出长事务缓冲区同步接边法,以待接边边界为中心建立缓冲区,提取磁盘上另一幅地形图中落入缓冲区内的实体建立长事务,调入当前打开的地形图(当前数据库)中,实现了对两个待接边地形图的快速同步操作.用ObjectARX开发工具开发了在AutoCAD平台上执行的长事务缓冲区法接边程序,取得了满意的编辑效率和成图质量.