西藏雅鲁藏布江缝合带中段仁布豆荚状铬铁矿成因及构造意义

藏南雅鲁藏布江缝合带为目前国内铬铁矿储量最大的缝合带.本文报道了缝合带中段仁布蛇绿岩的豆荚状铬铁矿床,围绕矿床特征开展成因探讨,对缝合带的形成演化和成矿作用提供新制约.仁布蛇绿岩呈近东西走向带状产出,主要由近30个大小不等的地幔橄榄岩体组成.地幔橄榄岩体主要为经历不同程度蛇纹石化的方辉橄榄岩和少量纯橄岩.在纯橄岩和方辉...     

青海省海北化工厂Cr6+污染调查评价与治理

海北化工厂已停产15年之久,但Cr6+污染依旧十分严重.调查得知,海北化工厂原生产废液排放及堆存废渣经降水淋滤作用下渗,是造成该区包气带和地下水Cr6+污染的主要原因.采用地下水质量法和污染指数法评价分析该区地下水Cr6+污染范围和污染影响程度.评价结果显示：Cr6+重度污染区面积0.75 km2,厂区包气带Cr6+平均含量67.67×10-6,平均超标指数1691.75,地下水中Cr6+浓度超过Ⅴ类水标准.在分析厂区周边水文地质条件的基础上,提出清除场地废渣废料并置换被污染的包气带、采用抽水法治理被污染的地下水的综合方案.     

石墨炉原子吸收光谱法测定镁基合金中的铍和镍

采用石墨炉原子吸收光谱法测定镁基合金中的铍和镍.研究并校正了基体对待测元素的影响.方法简单、快速.对含铍11.4×10-6、镍9.25×10-6的样品11份测定,相对标准偏差分别为3.5%、4.3%,铍、镍回收率分别为98.8%、97.5%.     

轻量化坑道钻机的研制及应用

为解决坑道钻机质量大,在巷道中搬迁运输困难的问题,采用轻型结构设计与模块化组装思路,结合轻质材料应用,研制了由5052-H38态高强度铝合金作为主材的ZDY1200G型轻量化坑道钻机,钻机快速拆解后单部件最大质量292.5 kg。采用三维DIC散斑变系统对钻机铝合金给进机身在极限载荷下的应变与位移进行了测量分析,测得最大回转负载工况最大主应变为0.87%,最大起拔工况机身关键部位最大位移6.317 mm,未产生塑性变形,满足使用需求。钻机研制成功后在云南省沧源县某矿进行了现场工业性试验,完成了斜向下43°、深度512.68 m的取心钻孔。试验结果表明,采用铝合金的坑道钻机在强度、刚度、可靠性上与碳钢为主材的坑道钻机相当,并且具有搬迁运输方便的优点,能较好地应用于坑道钻探施工。     

Petrology and PGE Abundances of High‐Cr and High‐Al Podiform Chromitites and Peridotites from the Bulqiza Ultramafic Massif,Eastern Mirdita Ophiolite,Albania

The Bulqiza ultramafic massif, which is part of the eastern Mirdita ophiolite of northern Albania, is world renowned for its high-Cr chromitite deposits. High-Cr chromitites hosted in the mantle section are the crystallized products of boninitic melts in a supra-subduction zone (SSZ). However, economically important high-Al chromitites are also present in massive dunite of the mantle-crust transition zone (MTZ). Chromian-spinel in the high-Al chromitites and dunites of the MTZ have much lower Cr# values (100Cr/(Cr+Al)) (47.7–55.1 and 46.5–51.7, respectively) than those in the high-Cr chromitites (78.2–80.4), harzburgites (72.6–77.9) and mantle dunites (79.4–84.3). The chemical differences in these two types of chromitites are reflected in the behaviors of their platinum-group elements (PGE). The high-Cr chromitites are rich in IPGE relative to PPGE with 0.10–0.45 PPGE/IPGE ratios, whereas the high-Al chromitites have relatively higher PPGE/IPGE ratios between 1.20 and 7.80. The calculated melts in equilibrium with the high-Cr chromitites are boninitic-like, and those associated with the high-Al chromitites are MORB-like but with hydrous, oxidized and TiO2-poor features. We propose that the coexistence of both types of chromitites in the Bulqiza ultramafic massif may indicates a change in magma composition from MORB-like to boninitic-like in a proto-forearc setting during subduction initiation.     

钻井利器的故事之“铝合金钻杆”

地球科学的发展对地球深部数据的依赖程度越来越高,作为“入地”重要手段的科学超深井工程是研究深部地质学的重要方法,被誉为是“伸入地壳的望远镜”。与钢钻杆相比,铝合金钻杆以其独特的优越性(质量轻、比强度高、钻进深度深、所需能耗少),已成为难进入地区、大位移井、超深井等钻柱设计的优选方案。本文从科普的角度介绍了钻柱与钻杆的区别、钻柱的使用极限长度、铝合金钻杆的技术优势及其现存的不足之处,以此提高对铝合金钻杆的认识,促进铝合金钻杆的研究和发展。     

黄原胶改性微米铁修复地下水中Cr(Ⅵ)污染的试验

为了解决微米铁的重力沉降问题,提高微米铁修复地下水Cr（Ⅵ）污染的原位修复效果,本文利用黄原胶对微米铁进行改性,并通过沉降实验探究改性微米铁浆液的稳定性,同时选择Cr（Ⅵ）作为目标污染物,探究黄原胶改性微米铁去除地下水Cr（Ⅵ）污染的降解能力。实验结果显示：当黄原胶的投加质量浓度分别为0.0、1.0、1.5、2.0、2.5、3.0、6.0 g/L时,改性微米铁浆液的悬浮稳定性逐渐得到加强,在5 h沉降实验结束时,对应的相对分光光度值分别为0.05、0.25、0.46、0.57、0.65、0.73和0.87;黄原胶具有抑制微米铁吸附Cr（Ⅵ）的能力,其可促进Cr（Ⅵ）的还原,提高Cr（Ⅵ）的去除率;随着黄原胶投加质量浓度的增加,对应的Cr（Ⅵ）去除率分别为33.4%、41.2%、47.4%、51.1%、53.0%、63.9%和64.1%;6.0 g/L黄原胶改性的微米铁浆液具有最佳的悬浮稳定性,黄原胶的投加提高了微米铁的反应活性,但当黄原胶投加质量浓度超过3.0 g/L时,其对Cr（Ⅵ）的去除率没有显著提高;黄原胶投加质量浓度越大,黄原胶的缓冲作用就越明显。     

某Cr(Ⅵ)污染场地修复的PRB反应材料及结构设计研究

渗透反应格栅(permeable reactive barrier,PRB)在国外被广泛应用于场地尺度的地下水污染修复,因其无须外源动力、不占地面空间、运行成本低等优势在国内受到广泛关注。不同场地水文地质条件、污染物类型、污染羽分布具有差异性,前期场地调查、反应材料的筛选、反应墙尺寸结构的设计对于PRB的有效运行至关重要。本文以PRB修复河南某Cr(Ⅵ)污染场地为例,详细阐述场地调查、材料筛选、材料反应参数确定、PRB结构优化等方面的研究过程及成果,可为后续PRB修复技术的应用提供参考。研究结果表明:PRB修复技术适用于该场地,铸铁与活性炭混合材料为最佳修复材料;反应门长40 m(反应材料厚2 m,上下游分别为2 m厚砾石层),东西两侧隔水墙长为60 m的U型漏斗-门系统型PRB,可有效捕获并修复污染羽,工程成本远低于连续反应墙式PRB,为该场地修复最优PRB结构类型。     

SMA复合摩擦阻尼器性能的试验研究

利用形状记忆合金(SMA)的超弹性效应及高阻尼性能,结合传统Pall摩擦型阻尼器的特点,提出了一种SMA复合摩擦阻尼器。在建立阻尼器力学分析模型的基础上,对SMA复合摩擦阻尼器的性能进行了试验研究,分析了位移幅值、加载频率等对阻尼器的等效刚度、单位循环耗能和等效阻尼比的影响,并与理论分析结果进行了对比。研究表明,SMA复合摩擦阻尼器在加卸载循环下会形成比较稳定的滞回曲线,表明这种阻尼器具有良好的耗能能力。     

Performance of a base isolator with shape memory alloy bars

A new and innovative base isolation device is introduced in this paper based on extensive research carried out by the authors and their co-workers. A prototype of the device was built and experimentally tested on the shaking table. The new base isolation device consists of two disks, one vertical cylinder with an upper enlargement sustained by three horizontal cantilevers, and at least three inclined shape memory alloy (SMA) bars. The role of the SMA bars is to limit the relative motion between the base and the superstructure, to dissipate energy by their super-elastic constitutive law and to guarantee the re-centring of the device. To verify the expected performance, a prototype was built and tested under sinusoidal waves of displacement of increasing frequency with different amplitudes. It is shown that the main feature of the proposed base isolation device is that for cyclic loading, the super-elastic behavior of the alloy results in wide load-displacement loops, where a large amount of energy is dissipated.