The impact of storm-triggered landslides on sediment dynamics and catchment-wide denudation rates in the southern Central Range of Taiwan following the extreme rainfall event of Typhoon Morakot

Extreme erosion events can produce large short-term sediment fluxes. Such events complicate erosion rates estimated from cosmogenic nuclide concentrations in river sediment by providing sediment with a concentration different from the long-term basin average. We present a detrital ¹⁰Be study in southern Taiwan, with multiple samples obtained in a time sequence bracketing the 2009 Typhoon Morakot, to assess the impact of landslide sediment on ¹⁰Be concentrations (N¹⁰Be) in river sediment. Sediment samples were collected from 13 major basins, two or three times over the last decade, to observe the temporal variation of N¹⁰Be. Landslide inventories with time intervals of 5–6 years were used to quantify sediment flux changes. A negative correlation between N¹⁰Be and landslide areal density indicates dilution of N¹⁰Be by landslide sediment. Denudation rates estimated from the diluted N¹⁰Be can be up to three times higher than the lowest rate derived from the same basins. Observed increases imply that, 3 years after the passage of Typhoon Morakot, fluvial channels still contain a considerable amount of sediment provided by hillslope landslides during the event. However, higher N¹⁰Be in 2016 samples indicate that the contribution from landslide sediment at the sampled grain size has decreased with time. The correlation between changes in N¹⁰Be and landslide area and volume is not strong, likely resulting from the stochastic and complex nature of sediment transport. To simultaneously evaluate the volume of landslide-derived sediment and estimate the background denudation rate, associated with less impulsive sediment supply, we constructed a sediment-mixing model with the time series of N¹⁰Be and landslide inventories. The spatial pattern of background erosion rate in southern Taiwan is consistent with the regional tectonic framework, indicating that the landscape is evolving mainly in response to the tectonic forcing, and this signal is modified, but not obscured by impulsive sediment supply. © 2019 John Wiley & Sons, Ltd.     

Clean quartz matters for cosmogenic nuclide analyses: An exploration of the importance of sample purity using the CRONUS-N reference material

Reference materials are key for assessing inter-laboratory variability and measurement quality, and for placing analytical uncertainty bounds on sample analyses. Here, we investigate four years of data resulting from repeated processing of the CRONUS-N reference material for cosmogenic ¹⁰Be and ²⁶Al analyses. At University of Vermont, we prepared a CRONUS-N aliquot with most of our sample batches from 2013 to 2017; these reference material samples were then distributed to four different accelerator mass spectrometry facilities, yielding 73 ¹⁰Be analyses and 58 ²⁶Al analyses. We determine CRONUS-N ¹⁰Be concentrations of (2.26 ± 0.14) x 10⁵ atoms g⁻¹ (n = 73, mean, 1 SD) and ²⁶Al concentrations of (1.00 ± 0.08) x 10⁶ atoms g⁻¹ (n = 58, mean, 1 SD). We find a reproducibility of 6.3% for ¹⁰Be and 7.7% for ²⁶Al (relative standard deviations). We also document highly variable ²⁷Al and Mg concentrations and a ¹⁰Be dispersion twice as large as the mean AMS analytic uncertainty. Analyses of the CRONUS-N material with and without density separation demonstrate that non-quartz minerals are present in the material and have a large impact on measured concentrations of ²⁷Al, ¹⁰Be, and impurities; these non-quartz minerals represent only a very small portion of the total mass (0.6–0.8%) but have a disproportionally large effect on the resulting data. Our results highlight the importance of completely removing all non-quartz mineral phases from samples prior to Be/Al extraction for the determination of in situ cosmogenic ¹⁰Be and ²⁶Al concentrations.     

26Al and 10Be dating of late pleistocene and holocene fill terraces: a record of fluvial deposition and incision,Colorado front range

Cosmogenic ²⁶Al, ¹⁰Be, and ¹⁴C dating of fluvial fill terraces in steep canyons of the Colorado Front Range provides a temporal framework for analysing episodic aggradation and incision. Results from Boulder Canyon show that terrace heights above the modern channel (grade) can be divided into: (1) Bull Lake (≳100 ka; 20–15 m above grade); (2) Pinedale (32–10 ka; 15–4 m above grade); and (3) Holocene age (<4 m above grade). No pre‐Bull Lake deposits are preserved along Boulder Canyon, and only three small remnants >15 m above grade record Bull Lake deposition. Well‐preserved terraces of Pinedale age suggest that the range of terrace height above grade reflects short‐term fluctuations in the river profile during periods of rapidly changing stream load and power. Net river incision apparently occurred during transitions to interglacial periods. Soil development and stratigraphic position, along with limited cosmogenic and ¹⁴C dating, suggest that ∼130 ka terraces in Boulder Canyon correlate with the Louviers Alluvium, and that 32 to 10 ka fills in the canyon correlate with the Broadway Alluvium on the adjacent High Plains. Late Pleistocene incision rates (∼0·15 m ka⁻¹) along Boulder Canyon exceed pre‐late Pleistocene incision rates, and are higher than middle to late Pleistocene incision rates (∼0·04 m ka⁻¹) on the High Plains. This study provides an example of how modern geochronologic techniques allow us to understand better rivers that drain glaciated catchments. Copyright © 2002 John Wiley & Sons, Ltd.     

Transient sediment supply in a high‐altitude Alpine environment evidenced through a 10Be budget of the Etages catchment (French Western Alps)

Although beryllium‐10 (¹⁰Be) concentrations in stream sediments provide useful synoptic views of catchment‐wide erosion rates, little is known on the relative contributions of different sediment supply mechanisms to the acquisition of their initial signature in the headwaters. Here we address this issue by conducting a ¹⁰Be‐budget of detrital materials that characterize the morphogenetic domains representative of high‐altitude environments of the European Alps. We focus on the Etages catchment, located in the Ecrins‐Pelvoux massif (southeast France), and illustrate how in situ ¹⁰Be concentrations can be used for tracing the origin of the sand fraction from the bedload in the trunk stream. The landscape of the Etages catchment is characterized by a geomorphic transient state, high topographic gradients, and a large variety of modern geomorphic domains ranging from glacial environments to scarcely vegetated alluvial plains. Beryllium‐10 concentrations measured in the Etages catchment vary from ~1 × 10⁴ to 4.5 × 10⁵ atoms per gram quartz, while displaying consistent ¹⁰Be signatures within each representative morphogenetic unit. We show that the basic requirements for inferring catchment‐wide denudation from ¹⁰Be concentration measurements are not satisfied in this small, dynamic catchment. However, the distinct ¹⁰Be signature observed for the geomorphic domains can be used as a tracer. We suggest that a terrestrial cosmogenic nuclide (TCN) budget approach provides a valuable tool for the tracing of material origin in basins where the ‘let nature do the averaging’ principles may be violated. Copyright © 2013 John Wiley & Sons, Ltd.     

Interlaboratory comparison of cosmogenic 21Ne in quartz

We performed an interlaboratory comparison study with the aim to determine the accuracy of cosmogenic ²¹Ne measurements in quartz. CREU-1 is a natural quartz standard prepared from amalgamated vein clasts which were crushed, thoroughly mixed, and sieved into 125–250 μm and 250–500 μm size fractions. 50 aliquots of CREU-1 were analyzed by five laboratories employing six different noble gas mass spectrometers. The released gas contained a mixture of 16–30% atmospheric and 70–84% non-atmospheric (predominantly cosmogenic) ²¹Ne, defining a linear array on the ²²Ne/²⁰Ne-²¹Ne/²⁰Ne three isotope diagram with a slope of 1.108 ± 0.014. The internal reproducibility of the measurements is in good agreement with the formal analytical precision for all participating labs. The external reproducibility of the ²¹Ne concentrations between labs, however, is significantly overdispersed with respect to the reported analytical precision. We report an average reference concentration for CREU-1 of 348 ± 10 × 10⁶ at [²¹Ne]/g[SiO₂], and suggest that the 7.1% (2σ) overdispersion of our measurements may be representative of the current accuracy of cosmogenic ²¹Ne in quartz. CREU-1 was tied to CRONUS-A, which is a second reference material prepared from a sample of Antarctic sandstone. We propose a reference value of 320 ± 11 × 10⁶ at/g for CRONUS-A. The CREU-1 and CRONUS-A intercalibration materials may be used to improve the consistency of cosmogenic ²¹Ne to the level of the analytical precision.     

An inter-laboratory comparison of cosmogenic 3He and radiogenic 4He in the CRONUS-P pyroxene standard

This study reports an inter-laboratory comparison of the ³He and ⁴He concentrations measured in the pyroxene material CRONUS-P. This forms part of the CRONUS-Earth and CRONUS-EU programs, which also produced a series of natural reference materials for in situ produced ²⁶Al, ¹⁰Be, ¹⁴C, ²¹Ne and ³⁶Cl.Six laboratories (GFZ Potsdam, Caltech Pasadena, CRPG Nancy, SUERC Glasgow, BGC Berkeley, Lamont New York) participated in this intercomparison experiment, analyzing between 5 and 22 aliquots each. Intra-laboratory results yield ³He concentrations that are consistent with the reported analytical uncertainties, which suggests that ³He is homogeneous within CRONUS-P. The inter-laboratory dataset (66 determinations from the 6 different labs) is characterized by a global weighted mean of (5.02 ± 0.12) × 10⁹ at g⁻¹ with an overdispersion of 5.6% (2σ). ⁴He is characterized by a larger variability than ³He, and by an inter-lab global weighted mean of (3.60 ± 0.18) × 10¹³ at g⁻¹ (2σ) with an overdispersion of 10.4% (2σ).There are, however, some systematic differences between the six laboratories. More precisely, 2 laboratories obtained mean ³He concentrations that are about 6% higher than the clustered other 4 laboratories. This systematic bias is larger than the analytical uncertainty and not related to the CRONUS-P material (see Schaefer et al., 2015). Reasons for these inter-laboratory offsets are difficult to identify but are discussed below. To improve the precision of cosmogenic ³He dating, we suggest that future studies presenting cosmogenic ³He results also report the ³He concentration measured in the CRONUS-P material in the lab(s) used in a given study.     

Dating Pleistocene deltaic deposits using in-situ 26Al and 10Be cosmogenic nuclides

The present study aims at testing the possibility of using the in-situ cosmogenic burial dating technique on deltaic deposits. The sequence analyzed is exposed along the Ligurian coast (north-west Italy) and is made of proximal marine and continental deposits previously considered Pliocene or Plio-Quaternary in age. In the study area two allostratigraphic units were recognized. The lower unit represents the evolution of a small coarse-grained delta developed in a fjord or embayment environment. The coarsening/shallowing upward trend observed within the sections, from bottom to top, suggests that the delta prograded rapidly in the landward portion of the canyon placed opposite to the paleo-river outlet. Within the deltaic sequence the transgressive and highstand system tracts were recognized. The unit 2 is composed by several alluvial fan systems deposited in small incised valleys developed within the previously, uplifted deltaic deposits and successively incised by a braided river system. In-situ produced cosmogenic nuclides were used in order to date the age of the deposition of the deltaic deposits. Results suggest that the studied deltaic sediments belonging to the unit 1 were deposited between 1,300,000 and 200,000 year ago thus during the Lower to Middle Pleistocene, whereas the unit 2 was deposited during the Middle Pleistocene as a consequence of a tectonically driven uplift phase. Furthermore samples collected within the prograding part of the delta show the higher denudation rates. The obtained results demonstrate that burial ages and related erosion rates inferred from cosmogenic nuclides concentrations can be considered as a very useful tool to reconstruct the sea level changes over the past 1 million year.     

Monthly record of the Cl and 36Cl fallout rates in a deciduous forest ecosystem in NE France in 2012 and 2013

This study aims at determining the chlorine and chlorine-36 fallout rates in an experimental beech forest site located in NE France (48°31′55″ N, 5°16′8″ E). A monthly record of Cl and ³⁶Cl concentrations in rainfall samples collected above the canopy was performed during two years, from March 2012 to February 2014. The results show that the Cl concentrations mainly originate from sea-spray while the ³⁶Cl concentrations originate from the stratosphere and therefore present a seasonal dependency. Abrupt and important inputs of ³⁶Cl from the stratosphere indeed yield sharp increases of the recorded concentrations during the spring-summer. We also show that a too short sampling period might bias the determined ³⁶Cl fallout rate. To smooth the seasonal and sporadic bursts of ³⁶Cl, a minimum of 6 months sampling period is required. A mean ³⁶Cl fallout rate of (77 ± 21) atoms m⁻² s⁻¹ can be deduced from our study, which is 45% higher than the modelled value. This discrepancy suggests more studies aiming at measuring the ³⁶Cl fallout rate worldwide are necessary.     

The potential of historic rock avalanches and man-made structures as chlorine-36 production rate calibration sites

Samples from three medieval rock avalanches from the French (Le Claps, Mont Granier) and Austrian Alps (Dobratsch) and a man-made structure, i.e. the Stephansdom in Vienna, have been analysed for in-situ produced ³⁶Cl by accelerator mass spectrometry (AMS). All four sampling sites of independently known exposure duration turned out to be not appropriate as calibration sites for the determination of the ³⁶Cl-production rate from Ca. Indeed, the determination of short exposure ages for dating rock avalanches and man-made structures by ³⁶Cl is hindered dramatically by inheritance, especially for samples characterized by high ^natCl-concentrations. Generally, there are hints that the theoretical calculation of ³⁶Cl-production from epithermal and thermal neutron-capture on ³⁵Cl is highly underestimated in all existing models, thus, asking for particular precaution if working on high-Cl samples for any project. Hence, this work evidences that potential high inheritance, even for samples reasonably shielded before exhumation, has to be considered especially when dealing with recently exposed surfaces such as glacially polished rocks, alluvial terraces, fault scarps etc.     

A loess-paleosol record of climate and glacial history over the past two glacial-interglacial cycles (~ 150 ka), southern Jackson Hole, Wyoming

Loess accumulated on a Bull Lake outwash terrace of Marine Oxygen Isotope Stage 6 (MIS 6) age in southern Jackson Hole, Wyoming. The 9 m section displays eight intervals of loess deposition (Loess 1 to Loess 8, oldest), each followed by soil development. Our age-depth model is constrained by thermoluminescence, meteoric ¹⁰Be accumulation in soils, and cosmogenic ¹⁰Be surface exposure ages. We use particle size, geochemical, mineral-magnetic, and clay mineralogical data to interpret loess sources and pedogenesis. Deposition of MIS 6 loess was followed by a tripartite soil/thin loess complex (Soils 8, 7, and 6) apparently reflecting the large climatic oscillations of MIS 5. Soil 8 (MIS 5e) shows the strongest development. Loess 5 accumulated during a glacial interval (~ 76-69 ka; MIS 4) followed by soil development under conditions wetter and probably colder than present. Deposition of thick Loess 3 (~ 43-51 ka, MIS 3) was followed by soil development comparable with that observed in Soil 1. Loess 1 (MIS 2) accumulated during the Pinedale glaciation and was followed by development of Soil 1 under a semiarid climate. This record of alternating loess deposition and soil development is compatible with the history of Yellowstone vegetation and the glacial flour record from the Sierra Nevada.