柿竹园钨锡钼铋矿床合理的勘探方法及储量比例探讨

本文剖析了柿竹园钨锡钼铋矿床地勘阶段地质观察粗浅，勘探投入超前，探明储量积压、Ｂ＋Ｃ级储量比例偏大等不合理的勘查工作及其原因。在此基础上，探讨矿区合理的勘探程度，储量比例及由此带来的经济效益。     

The Uplift of the Longmenshan Thrust Belt and Subsidence of the West Sichuan Foreland Basin

Based on fission track dating of apatite, and measurement of vitrinite reflectance of rock samples from the Longmenshan (Longmen Mountain)area and the West Sichuan foreland basin and computer modelling it is concluded that (l)the Songpan-Garze fold belt has uplifted at least by 3-4 km with an uplift rate of no less than 0.3-0.4 mm/a since 10 Ma B.P.; (2) the Longmenshan thrust nappe belt has uplifted at least by 5-6 km with an uplift rate of more than 0.5- 0.6 mm /a since 10 Ma B.P.; (3) the Longmenshan detachment belt has uplifted by 1 - 2 km at a rate of 0.016-0.032 mm/a since 60 Ma B.P.; (4) the West Sichuan foreland basin has uplifted by 1.7-3 km at a rate of 0.028-0.05 mm/a since 60 Ma B.P.; (5) the uplift rate of the area on the west side of the Beichuan-Yingxiu-Xiaoguanzi fault for the last 10 Ma is 40 times as much as that on its east side; (6) the uplifting of the the Songpan - Garze fold belt and the subsidence of the West Sichuan foreland basin 60 Ma ago exhibit a mirro-image correlation, i.e     

Estimation of in situ viscoelastic parameters of weak floor strata by plate-loading tests

Summary This paper explores an approach to estimation of the viscoelastic parameters of weak floor strata using plate-loading tests. Mathematical equations are derived to describe deformation-time history for the standard Burgers model under three-dimensional stress-strain conditions, which are verified with a finite element model. A number of time-dependent in-mine plate-loading tests were conducted and the values of the viscoelastic parameters were estimated based on the derived equation. It is shown that large discrepancies between the parameter values estimated from the plate-loading tests and those acquired from the in-mine convergence data are the results of neglecting adjacent pillar interaction. Finite element modelling was conducted to investigate the effects of adjacent pillar interactions upon the pillar settlement. Based on the finite element analyses, a correction curve was developed to adjust the viscoelastic parameter values to take into account the interaction between adjacent pillars. With the correction, the parameter values estimated from the plate-loading tests compared favourably with those acquired from the in-mine convergence results.     

Feasibility and cost of creating an iron-phosphate coating on pyrrhotite to prevent oxidation

 Acid mine drainage (AMD) occurs when sulfide minerals are exposed to an oxidizing environment. Most of the methods for preventing AMD are either short-term or high cost solutions. Coating with iron phosphate is a new technology for the abatement of AMD. It involves treating the sulfide with a coating solution composed of H₂O₂, KH₂PO₄, and sodium acetate as a buffer agent. The H₂O₂ oxidizes the sulfide surface and produces Fe³⁺ so that iron phosphate precipitates as a coating on the sulfide surface. Experiments performed under laboratory conditions prove that an iron phosphate coating can be established on pyrrhotite surfaces with optimal concentrations of the coating solution in the range of: 0.2M/0.01M H₂O₂, 0.2M KH₂PO₄, and 0.2M sodium acetate NaAc, depending on the experimental scale. Iron phosphate coating may be a long-term solution to the problem of AMD. The method would be easy to implement; the reagent cost, however, is not low enough, although it is lower than the conventional treatment with lime. Received: 30 March 1995 · Accepted: 6 September 1995     

Field assessment of acid mine drainage contamination in surface and ground water

Both sulfate and conductivity are useful indicators of acid mine drainage (AMD) contamination. Unlike pH, they are both extremely sensitive to AMD even where large dilutions have occurred. The advantage of using sulfate to trace AMD is that unlike other ions it is not removed to any great extent by sorption or precipitation processes, being unaffected by fluctuations in pH. These two parameters are also closely associated as would be expected, as conductivity is especially sensitive to sulfate ions. Therefore, as sulfate analysis is difficult in the field, conductivity can be used to predict sulfate concentration in both AMD and contaminated surface waters using regression analysis. Most accurate predictions are achieved by using equations given for specific conductivity ranges or AMD sources. There is also potential to use conductivity to predict approximate concentrations of key metals when the pH of the water is within their respective solubility ranges.     

滇西南南段组和拉巴群地质时代及构造背景

南段组和拉巴群出露于昌宁-孟连构造带内,是临沧地体的组成部分。通过南畔、阿里、南段、海邦和团结吊桥剖面研究,拉巴群可分为5个岩性段,归上石炭统至二叠系,南段组属下石炭统。临沧地体为一稳定的微陆块,二叠纪晚期增生到澜沧江岛弧的西缘。     

New Evidence for Eastward Extension of Late Hercynian－Early Indosinian Qinling Sea

ＮｅｗＥｖｉｄｅｎｃｅｆｏｒＥａｓｔｗａｒｄＥｘｔｅｎｓｉｏｎｏｆＬａｔｅＨｅｒｃｙｎｉａｎ－ＥａｒｌｙＩｎｄｏｓｉｎｉａｎＱｉｎｌｉｎｇＳｅａＤｕＹｕａｎｓｈｅｎｇ；ＦｅｎｇＱｉｎｇｌａｉ；ＹｉｎＨｏｎｇｆｕ（ＦａｃｕｌｔｙｏｆＥａｒｔｈＳｃｉｅｎ...     

淮南谢—矿煤的组成对甲烷吸附性的影响

从淮南谢—矿五层煤（Ｃ＿（１３）、Ｂ＿（１１ｂ）、Ｂ＿（１０）、Ｂ＿（４ｂ）和Ａ＿３）中精选出镜煤、壳质暗煤、惰性暗煤及构造煤，采用重量法，分别测定它们的甲烷吸附量，从而研究不同成分组成的煤其甲烷吸附性能。     

地震CT及其地质解释

在金川公司龙首矿东采区1 280中段井下500m深的巷道中应用地震CT技术进行寻找深部隐伏矿体的实验。波速图像表明,研究区内中西部有一高速异常区,推断为花岗岩体和含矿的超基性侵入岩体。区内还有一个横贯测区中央近东西走向的低速断裂带。这些推断结果为后期的钻探和巷道开掘所证明。     

谈调整构造

调整构造是伸展型沉积盆地和造山带中普遍存在的构造,它与走向构造一起,控制了沉积盆地或造山带的基本轮廓与内部结构。调整构造横切走向构造,并与之共同控盆、控岩、控矿,并间隔开两侧不同的构造样式。它以长时期、多阶段活动,具有高渗透性为主要特征,是控制矿带展布与矿床就位的重要构造,也是固定成矿预测区与找矿靶区的重要依据之一,本文以鲁西、中亚及乌拉山-大青山地区、兰坪─思茅盆地区及右江盆地区为例,论述了调整构造的基本特征及控矿作用。