Scaling of response spectrum and duration for aftershocks

Aftershocks have the potential to cause collapse of a structure that has been already damaged by the preceding main shock. Seismic safety of a structure should therefore be ascertained through a damage analysis using the anticipated main shock and few larger-aftershock motions. Simulation of aftershock motions needs characterization of the seismic hazard due to aftershocks, and therefore it will be useful to develop a conditional scaling model that can predict the response spectrum of an anticipated aftershock motion consistent with the design spectrum of the main shock motion anticipated at the same station. In this study an attempt is made to develop a conditional scaling model for the pseudo spectral velocity spectrum via linear regression analysis on the aftershock and main shock recordings for the 1999 Chi–Chi earthquake. It is shown that it may be possible to obtain a simpler and approximate version of the conditional model from an unconditional model. Damage-causing potential of a ground motion also depends on its strong motion duration (SMD) and therefore a conditional scaling model is developed for SMD of the aftershock motion in several narrow frequency-bands. The model is developed for the larger-aftershock motions and it is shown that a reasonable replacement of such a model may be obtainable directly from an unconditional model. Finally, a simple weighted averaging scheme is proposed to obtain the composite SMD from the SMDs for different frequency bands by using the pseudo spectral acceleration spectrum of the motion.     

Crustal Growth by Magmatic Accretion Constrained by Metamorphic P-T Paths and Thermal Models of the Kohistan Arc, NW Himalayas

Magmatic accretion is potentially an important mechanism inthe growth of the continental crust and the formation of granulites.In this study, the thermal evolution of a magmatic arc in responseto magmatic accretion is modeled using numerical solutions ofthe one-dimensional heat conduction equation. The initial andboundary conditions used in the model are constrained by geologicalobservations made in the Kohistan area, NW Himalayas. Takingconsideration of the preferred intrusion locations for basalticmagmas, we consider two plausible modes of magmatic accretion:the first involves the repeated intrusion of basalt at mid-crustaldepths (‘intraplate model’), and the second evaluatesthe simultaneous intrusion of basalt and picrite at mid-crustaldepths and the base of the crust respectively (‘double-platemodel’). The results of the double-plate model accountfor both the inferred metamorphic P–T paths of the Kohistanmafic granulites and the continental geotherm determined frompeak P–T conditions observed for granulite terranes. Thedouble-plate model may be applicable as a key growth processfor the production of thick mafic lower crust in magmatic arcs. KEY WORDS: thermal model; magmatic underplating; P–T path; granulite; lower crust     

基于地质记录用时域组合模型预测气候变化趋势的初步研究

用时域分析组合模型建立了１００万年来６０°Ｎ６月份太阳辐射量时间序列、宝鸡黄土粒度时间序列、渭南夏季风指数时间序列的动态模型．研究结果表明,时域分析组合模型较好地提取了时间序列的信息,得到的几个显著周期Ｔ＝１３３,１００,８９,４１,２３,１９ｋａ,与地球轨道三要素的变化周期接近．用组合模型拟合实测数据,精度是高的;用其预测未来气候替代性指标时间序列的变化情况,发现未来气候有向干冷方向发展的趋势．时域分析组合模型为研究气候变化趋势提供了一种定量分析、预测的方法．     

积极推动“数字海南”建设

海南省具有得天独厚的发展优势,“数字地球”是实现整体可持续发展的重要保障,将有力推进全省信息化的进程,促进经济发展。     

Compositional Zoning of the Bishop Tuff

Compositional data for >400 pumice clasts, organized accordingto eruptive sequence, crystal content, and texture, providenew perspectives on eruption and pre-eruptive evolution of the>600 km³ of zoned rhyolitic magma ejected as the Bishop Tuffduring formation of Long Valley caldera. Proportions and compositionsof different pumice types are given for each ignimbrite packageand for the intercalated plinian pumice-fall layers that eruptedsynchronously. Although withdrawal of the zoned magma was lesssystematic than previously realized, the overall sequence displaystrends toward greater proportions of less evolved pumice, morecrystals (0·5–24 wt %), and higher FeTi-oxide temperatures(714–818°C). No significant hiatus took place duringthe 6 day eruption of the Bishop Tuff, nearly all of which issuedfrom an integrated, zoned, unitary reservoir. Shortly beforeeruption, however, the zoned melt-dominant portion of the chamberwas invaded by batches of disparate lower-silica rhyolite magma,poorer in crystals than most of the resident magma but slightlyhotter and richer in Ba, Sr, and Ti. Interaction with residentmagma at the deepest levels tapped promoted growth of Ti-richrims on quartz, Ba-rich rims on sanidine, and entrapment ofnear-rim melt inclusions relatively enriched in Ba and CO₂.Varied amounts of mingling, even in higher parts of the chamber,led to the dark gray and swirly crystal-poor pumices sparselypresent in all ash-flow packages. As shown by FeTi-oxide geothermometry,the zoned rhyolitic chamber was hottest where crystal-richest,rendering any model of solidification fronts at the walls orroof unlikely. The main compositional gradient (75–195ppm Rb; 0·8–2·2 ppm Ta; 71–154 ppmZr; 0·40–1·73% FeO*) existed in the melt,prior to crystallization of the phenocryst suite observed, whichincluded zircon as much as 100 kyr older than the eruption.The compositions of crystals, though themselves largely unzoned,generally reflect magma temperature and the bulk compositionalgradient, implying both that few crystals settled or were transportedfar and that the observed crystals contributed little to establishingthat gradient. Upward increases in aqueous gas and dissolvedwater, combined with the adiabatic gradient (for the 5 km depthrange tapped) and the roofward decline in liquidus temperatureof the zoned melt, prevented significant crystallization againstthe roof, consistent with dominance of crystal-poor magma earlyin the eruption and lack of any roof-rind fragments among theBishop ejecta, before or after onset of caldera collapse. Amodel of secular incremental zoning is advanced wherein numerousbatches of crystal-poor melt were released from a mush zone(many kilometers thick) that floored the accumulating rhyoliticmelt-rich body. Each batch rose to its own appropriate levelin the melt-buoyancy gradient, which was self-sustaining againstwholesale convective re-homogenization, while the thick mushzone below buffered it against disruption by the deeper (non-rhyolitic)recharge that augmented the mush zone and thermally sustainedthe whole magma chamber. Crystal–melt fractionation wasthe dominant zoning process, but it took place not principallyin the shallow melt-rich body but mostly in the pluton-scalemush zone before and during batchwise melt extraction. KEY WORDS: Bishop Tuff; ignimbrite; magma zonation; mush model; rhyolite     

蒙古塔木察格盆地塔南凹陷下白垩统层序结构类型、控制因素与层序发育模式

利用录井及地震反射资料,采用层序地层学原理对蒙古塔木察格盆地塔南凹陷下白垩统地层层序进行了划分和对比,划分出了4个三级层序（SQ1-SQ4）。在此基础上,结合盆地的构造演化特点,研究了层序结构特征,划分了层序类型,其中,SQ1和SQ2为初始裂谷期湖泊层序,SQ3为裂谷深陷期层序,SQ4为裂谷后过渡层序。层序的结构主要受构造沉降方式控制,塔南凹陷不同时期构造沉降方式不同,形成了3种层序发育模式,即简单箕状斜坡模式、差异沉降构造反转模式、坳陷型层序发育模式,不同的层序发育模式,其地层岩性圈闭的发育和分布不同。     

利用ARC/INFO进行三维地形模型的建立、处理和动态模拟

介绍了利用 ARC/ INFO建立三维地形模型的方法 ,以及利用其新版本的部分新功能处理三维地形模型、进行动态模拟的方法 ,与以往处理三维模型必须借助外部三维图形开发软件包的方法相比 ,具有高速、灵活、可视性强、支持强大分析功能等优点。形成的三维模型可随时与 ARC/ INFO的其它数据模型交换信息 ,与外部进程实时通讯 ,为使用者提供了二维分析工具所不能提供的信息 ,为开发视景仿真系统等与表面分析、立体显示有关的应用系统提供了强有力的支持。     

W UMa型相接双星的理论研究

本文回顾了W UMa型相接双星观测和理论研究的历史。总结了W UMa型相接双星观测特性和理论研究的成果。最后讨论了W UMa型相接双星理论模型研究中存在的问题及其解决这些问题的一些可行方法。     

中国中央造山带资源环境态势与可持续发展对策

资源与环境是谋求发展的物质基础和重要前提,其合理开发利用是实现可持续发展的重要内容。中国中央造山带富能、富矿、少植被、土地瘠薄,这对该区的经济发展既显示了无穷的诱惑,却又制约着对其的开发利用。对此,从保护利用水土资源、利用资源优势促进经济发展以及发展科技教育与提高人口素质三方面提出建议以促进该区走上可持续发展之路。     

Inverse Analysis of Deep Excavation Using Differential Evolution Algorithm

This paper presents the applications of the differential evolution (DE) algorithm in back analysis of soil parameters for deep excavation problems. A computer code, named Python‐based DE, is developed and incorporated into the commercial finite element software ABAQUS, with a parallel computing technique to run an FE analysis for all trail vectors of one generation in DE in multiple cores of a cluster, which dramatically reduces the computational time. A synthetic case and a well‐instrumented real case, that is, the Taipei National Enterprise Center (TNEC) project, are used to demonstrate the capability of the proposed back‐analysis procedure. Results show that multiple soil parameters are well identified by back analysis using a DE optimization algorithm for highly nonlinear problems. For the synthetic excavation case, the back‐analyzed parameters are basically identical to the input parameters that are used to generate synthetic response of wall deflection. For the TNEC case with a total of nine parameters to be back analyzed, the relative errors of wall deflection for the last three stages are 2.2, 1.1, and 1.0%, respectively. Robustness of the back‐estimated parameters is further illustrated by a forward prediction. The wall deflection in the subsequent stages can be satisfactorily predicted using the back‐analyzed soil parameters at early stages. Copyright © 2014 John Wiley & Sons, Ltd.