秘鲁萨卡拉铁-铜-金矿床地质特征及成因

萨卡拉(Cercana)铁-铜-金矿床位于秘鲁南部古近纪斑岩型铜-钼矿床成矿带西缘。通过大量的野外地质调查、遥感、物探及室内工作认为,萨卡拉矿床与该地区典型斑岩型矿床存在一定的差异,且具有铁氧化物铜金(IOCG)矿床的某些特点。分析其深部找矿潜力,指出在进行矿产勘查时应考虑从IOCG型矿床的角度出发,对其进行深入的勘查,突破目前遇到的找矿工作困境。     

The extension of the Late Weichselian/Late Devensian ice sheets in the North Sea Basin

The distribution of large channel-like features, comprising Weichselian/Devensian incisions, in the western North Sea provides evidence for a much larger extension of the last ice sheet than currently assumed. Morphological comparison of the incisions with those in North Germany and Poland reveals a striking similarity in shape and distribution. The features on the North Sea floor are interpreted as being formed by meltwater erosion within the margin of the ice sheet. The widespread absence of Weichselian/Devensian till in the area under consideration may be attributed to later erosion. Large-scale reworking and redistribution of sediments is indicated by the complete sediment infill of the majority of the incisions.     

Reappraisal of great historical earthquakes in the northern Chile and southern Peru seismic gaps

A critical reappraisal of great historical interplate earthquakes in the occidental margin of South America, including southern Peru and northern Chile, is carried out.A spacetime distribution of the earthquakes associated to the seismotectonics regions defined by the rupture zones of the greatest events (1868, Mw = 8.8 and 1877, Mw = 8.8) is obtained. Both regions are seismic gaps that are in the maturity state of their respective earthquake cycles. The region associated to the 1868 earthquake presents a notable seismic quiescence in the present century.     

Shape and intrusion style of the Coastal Batholith, Peru

The Coastal Batholith of Peru extends over 1600 km parallel to the coast along the Andean trend. Gravity profiles on three traverses across the batholith indicate the geometry is essentially that of a flat slab with average thickness from 2.0–3.2 km, and a thick root 4–10 km wide to the west. Granitic material does not extend to depths greater than 3 km below sea level datum.This study supports recent gravity work which indicates plutons are commonly thin, 5 km or less in thickness. Detailed mapping in the Lima segment of the Coastal Batholith reveals thin plutons where space was made dominantly by downward displacement via floor depression. However, early roof uplift also created some space. Stoping occurs but is not a major space maker. Floor depression may be modelled by cantilever or piston mechanisms and although the strong marginal deformation with mylonites, tuffisites, microbreccia, faults and shear zones suggests the piston model best describes the mechanism of emplacement of much of the Coastal Batholith some space was probably made by a cantilever mechanism. In brief, space making processes involved early roof uplift and regional doming, then floor depression mainly by piston and probably subsidiary cantilever mechanisms and, finally, local stoping producing the cut-out rectilinear nature of the batholith.The Coastal Batholith formed on shallow partial melting of hydrous basaltic marginal basin rocks between 5 and 10 km. Floor depression occurred as the crustal column foundered into an actively deflating layer of partial melt. This is an efficient space making process and is limited here to shallow levels of the upper crust only. The melts ascended to within 2 or 3 km of the surface, up dyke-like conduits then spread horizontally to form tabular plutons.     

Crustal structure of the ancestral northwestern California forearc region from seismic reflection imaging: implications for convergent margin tectonics

Analysis of a suite of 2-D seismic reflection profiles reveals that the northwestern Sacramento Valley and eastern Coast Range foothills, northern California, are underlain by a system of blind, west-dipping thrust faults. Homoclinally east-dipping and folded Mesozoic marine forearc strata exposed along the western valley margin define the forelimbs of northeast-vergent fault-propagation folds developed in the hanging walls of the thrusts. Exhumed coherent blueschists of the accretionary complex and attenuated remnants of the ophiolitic forearc basement presently exposed in the eastern Coast Ranges are in the hanging wall of the blind thrust system, and have been displaced from their roots in the footwall. Deep, east-dipping magnetic reflectors in the footwall of the thrust system may be fragments of sheared, serpentinized and attenuated ophiolitic basement. Restoration of slip on the thrusts suggests that the Coast Range fault, which is the exposed structural contact between the coherent blueschists and attenuated ophiolite, originally dipped east and is associated with the east-dipping magnetic reflectors in the footwall. This interpretation of the reflection data is consistent with previous inferences about the deep structure in this region, and supports a two-stage model for blueschist exposure in the eastern Coast Ranges: (1) blueschist exhumation relative to the forearc basin by attenuation of the ophiolitic basement along the east-dipping Coast Range fault system in late Cretaceous; (2) blueschists, attenuated ophiolite, and forearc strata all were subsequently uplifted and folded in the hanging wall of the blind thrust system beginning in latest Cretaceous–early Tertiary. The blind thrust system probably rooted in, and was antithetic to, the east-dipping subduction zone beneath the forearc region. Active transpressional plate motion in western California is locally accommodated, in part, by reactivation of blind thrust faults that originally developed during the convergent regime.     

Continental growth at convergent margins facing large ocean basins: a case study from Mesozoic convergent-margin basins of Baja California, Mexico

Mesozoic rocks of the Baja California Peninsula form one of the most areally extensive, best-exposed, longest-lived (160 my), least-tectonized and least-metamorphosed convergent-margin basin complexes in the world. This convergent margin shows an evolutionary trend that may be typical of arc systems facing large ocean basins: a progression from highly extensional (phase 1) through mildly extensional (phase 2) to compressional (phase 3) strain regimes. This trend is largely due to the progressively decreasing age of lithosphere that is subducted, which causes a gradual decrease in slab dip angle (and concomitant increase in coupling between lower and upper plates), as well as progressive inboard migration of the arc axis.This paper emphasizes the usefulness of sedimentary and volcanic basin analysis for reconstructing the tectonic evolution of a convergent continental margin. Phase 1 consists of Late Triassic to Late Jurassic oceanic intra-arc to backarc basins that were isolated from continental sediment sources. New, progressively widening basins were created by arc rifting and sea floor spreading, and these were largely filled with progradational backarc arc-apron deposits that record the growth of adjacent volcanoes up to and above sea level. Inboard migration of the backarc spreading center ultimately results in renewed arc rifting, producing an influx of silicic pyroclastics to the backarc basin. Rifting succeeds in conversion of the active backarc basin into a remnant backarc basin, which is blanketed by epiclastic sands.Phase 1 oceanic arc–backarc terranes were amalgamated by Late Jurassic sinistral strike slip faults. They form the forearc substrate for phase 2, indicating inboard migration of the arc axis due to decrease in slab dip. Phase 2 consists of Early Cretaceous extensional fringing arc basins adjacent to a continent. Phase 2 forearc basins consist of grabens that stepped downward toward the trench, filled with coarse-grained slope apron deposits. Phase 2 intra-arc basins show a cycle of (1) arc extension, characterized by intermediate to silicic explosive and effusive volcanism, culminating in caldera-forming silicic ignimbrite eruptions, followed by (2) arc rifting, characterized by widespread dike swarms and extensive mafic lavas and hyaloclastites. This extensional-rifting cycle was followed by mid-Cretaceous backarc basin closure and thrusting of the fringing arc beneath the edge of the continent, caused by a decrease in slab dip as well as a possible increase in convergence rate.Phase 2 fringing arc terranes form the substrate for phase 3, which consists of a Late Cretaceous high-standing, compressional continental arc that migrated inboard with time. Strongly coupled subduction resulted in accretion of blueschist metamorphic rocks, with development of a broad residual forearc basin behind the growing accretionary wedge, and development of extensional forearc (trench–slope) basins atop the gravitationally collapsing accretionary wedge. Inboard of this, ongoing phase 3 strongly coupled subduction, together with oblique convergence, resulted in development of forearc strike-slip basins upon arc basement.The modern Earth is strongly biased toward long-lived arc–trench systems, which are compressional; therefore, evolutionary models for convergent margins must be constructed from well-preserved ancient examples like Baja California. This convergent margin is typical of many others, where the early to middle stages of convergence (phases 1 and 2) create nonsubductable arc–ophiolite terranes (and their basin fills) in the upper plate. These become accreted to the continental margin in the late stage of convergence (phase 3), resulting in significant continental growth.     

Volcanic passive margins

Compared to non-volcanic ones, volcanic passive margins mark continental break-up over a hotter mantle, probably subject to small-scale convection. They present distinctive genetic and structural features. High-rate extension of the lithosphere is associated with catastrophic mantle melting responsible for the accretion of a thick igneous crust. Distinctive structural features of volcanic margins are syn-magmatic and continentward-dipping crustal faults accommodating the seaward flexure of the igneous crust. Volcanic margins present along-axis a magmatic and tectonic segmentation with wavelength similar to adjacent slow-spreading ridges. Their 3D organisation suggests a connection between loci of mantle melting at depths and zones of strain concentration within the lithosphere. Break-up would start and propagate from localized thermally-softened lithospheric zones. These ‘soft points’ could be localized over small-scale convection cells found at the bottom of the lithosphere, where adiabatic mantle melting would specifically occur. The particular structure of the brittle crust at volcanic passive margins could be interpreted by active and sudden oceanward flow of both the unstable hot mantle and the ductile part of the lithosphere during the break-up stage. To cite this article: L. Geoffroy, C. R. Geoscience 337 (2005).     

Commingling and mixing of S-type peraluminous, ultrapotassic and basaltic magmas in the Cayconi volcanic field, Cordillera de Carabaya, SE Peru

The Cayconi district of the Cordillera de Carabaya, SE Peru, exposes a remnant of an upper Oligocene–Lower Miocene (22.2–24.4 Ma) volcanic field, comprising a diverse assemblage of S-type silicic and calc-alkaline basaltic to andesitic flows, members of the Picotani Group of the Central Andean Inner Arc. Basaltic flows containing olivine, plagioclase, clinopyroxene, ilmenite and glass, and glassy rhyolitic agglutinates with phenocrystic quartz, cordierite, plagioclase, sanidine, ilmenite and apatite, respectively exhibit mineralogical and geochemical features characteristic of medium-K mafic and Lachlan S-type silicic lavas. Cordierite-bearing dacitic agglomerates and lavas, however, are characterized by dispersed, melanocratic micro-enclaves and phenocrysts set in a fine-grained quartzo-feldspathic matrix. They contain a bimodal mica population, comprising phlogopite and biotite, as well as complexly zoned, sieve-textured plagioclase grains, sector-zoned cordierite, sanidine, quartz, irregular patches of replaced olivine, clinopyroxene and orthopyroxene and accessory phases including zircon, monazite, ilmenite and chromite. The coexistence of minerals not in mutual equilibrium and the growth/dissolution textures exhibited by plagioclase are features indicative of magmatic commingling and mixing. Trachytic-textured andesite flows interlayered with olivine+plagioclase–glomerophyric, calc-alkaline basalts have a phenocrystic assemblage of resorbed orthopyroxene and plagioclase and exhibit melanocratic groundmass patches of microphenocrystic phlogopite, Ca-rich sanidine, ilmenite and aluminous spinel. The mineralogical and mineral chemical relationships in both the dacites and the trachytic-textured andesites imply subvolcanic mixing between distinct ultrapotassic mafic melts, not represented by exposed rock types, and both the S-type silicic and calc-alkaline mafic magmas. Such mixing relationships are commonly observed in the Oligo-Miocene rocks of the Cordillera de Carabaya, suggesting that the S-type rocks in this area and, by extension, elsewhere derive their unusually high K₂O, Ba, Sr, Cr and Ni concentrations from commingling and mixing with diverse, mantle-derived potassic mafic magmas.     

HOME GARDENS IN AMAZONIAN PERU: DIVERSITY AND EXCHANGE OF PLANTING MATERIAL*

ABSTRACT. This article examines how peasant farmers build and maintain agrobiodiversity in home gardens found in two traditional peasant communities along the Marañón River in the Peruvian Amazon. Data were gathered through household and garden surveys as well as in‐depth interviews with garden tenders in an upland mixed agricultural village and a lowland fishing village. Substantial variations in cultivated plant diversity were encountered in gardens between and within the villages, which are found to be related to differential exchange of seeds, cuttings, suckers, and other planting material as well as to specific garden and household characteristics. Planting material flows along multiple pathways—from gift giving and purchase to inheritance and scavenging—to the gardens, reflecting a complex and often extensive network of exchange that enables the establishment and maintenance of home garden plant diversity in seemingly isolated and small communities. Further research is needed to identify broader geographical and sociocultural patterns of agrobiodiversity in Amazonia.     

Impact of a rock avalanche on a moraine‐dammed proglacial lake: Laguna Safuna Alta,Cordillera Blanca,Peru

Moraines that dam proglacial lakes pose an increasing hazard to communities in the Andes and other mountain ranges. The moraines are prone to failure through collapse, overtopping by lake waters or the effect of displacement waves resulting from ice and rock avalanches. Resulting floods have led to the loss of thousands of lives in the Cordillera Blanca mountains of Peru alone in the last 100 years. On 22 April 2002 a rock avalanche occurred immediately to the south‐west of Laguna Safuna Alta, in the Cordillera Blanca. The geomorphic evidence for the nature, magnitude and consequences of this event was investigated in August 2002. Field mapping indicated that the avalanche deposited 8–20 × 10⁶ m³ of rock into the lake and onto the surface of the frontal region of Glaciar Pucajirca, which flows into the lake. Repeated bathymetric surveying indicated that ～5 × 10⁶ m³ of this material was deposited directly into the lake. The immediate effect of this event was to create a displacement wave that gained in height as it travelled along the lake basin, overtopping the impounding moraine at the lake's northern end. To achieve overtopping, the maximum wave height must have been greater than 100 m. This, and subsequent seiche waves, caused extensive erosion of both the proximal and distal faces of the impounding terminal moraine. Further deep gullying of the distal face of this moraine resulted from the supply of pressurized water to the face via a relief overflow tunnel constructed in 1978. Two‐dimensional, steady‐state analysis of the stability of the post‐avalanche moraine rampart indicates that its proximal face remains susceptible to major large‐scale rotational failure. Copyright © 2005 John Wiley & Sons, Ltd.