对虾与鱼、贝类封闭式综合养殖的实验研究

于1995－1999年采用陆基实验围隔法系统地研究了对虾与鱼、贝类封闭式综合养殖的基础问题，所选取的材料为中国对虾、台湾红罗非鱼、缢蛏与海湾扇贝，研究出了4种优化结构养殖模式。结果表明，4种模式的组成及各成分间生物量（收获前）的比值分别为：对虾的养殖效果都比同样条件下的对虾单养模式显著优越；其中最好的虾、鱼、贝三元综合养殖模式将产量提高了28％，投入氮的利用率提高了85％。同时采取封闭式的养殖方法，向浅海输出的氮只占养殖输入氮的6％－8％，从而显著降低了对浅海的污染。     

Experiments on the resuspension of estuarine sediments containing benthic diatoms

A laboratory system was used to test the effect of water flow on the resuspension of mud and sand sediments and, specifically, benthic diatoms from the Ems estuary, The Netherlands. Current velocities generated by two rotating cylinders in a cylindrical tank were determined by a small float and a laser Doppler velocimeter. At low angular velocities, the amount of suspended matter increased linearly with angular velocity and the float current velocity. However, at higher angular velocities, the increase in current velocity was less because of the strong turbulence: concomitantly, the current velocity boundary layer (δ) became thinner and the suspended matter concentration increased rapidly. The dominant diatom species from the sandy sediment were suspended in two distinct groups, one of which consisted of the species Navicula aequorea, Navicula salinicola, Ophephora martyi and Opephora pacifica, and was more exclusively bound to sand grains than the other. The benthic diatom species inhabiting the silty sediment did not show this difference. The most important shortcoming in the experiments was the inability to determine the radial and vertical velocity components. This precluded reliable calculations of the shear stress. The data presented emphasize the importance of finding a method to determine the shear stress under experiments and field conditions so that direct comparisons can be made. Despite this it is assumed that, just as under the experimental conditions discussed, under natural conditions in shallow waters resuspension starts at current velocities as low as ca. 10 cm s⁻¹.     

时间不连续压力序列的傅立叶分析方法

提出了一种用于对不连续压力采样序列的傅立叶分析方法.此方法将周期函数展开成傅立叶级数,但在数值积分时取函数周期内有采样值的区间作为积分域,然后求解线性方程组得到傅立叶级数的系数值.为了检验本方法的有效性,利用此方法对解析函数进行了拟合,当一个周期内的取样时间大于1/2周期时,利用此方法能够得到满意的结果.利用实验方法研究了波浪作用下截断圆柱表面的压力分布.在波浪作用下静水面附近的测点在露出水面时没有压力值.利用所提出的傅立叶分析方法对略低于静水面位置的实测压力进行了分析,拟合结果与实测结果吻合很好,说明此方法在处理物理模型实验中间断采样得到的数据是有效的.利用数值方法对波浪压力进行了计算,并将一阶和二阶波压力的数值结果与实测值进行了比较.     

Investigation of Hydroelastic Ship Responses of An ULOC in Head Seas

Investigation of hydroelastic ship responses has been brought to the attention of the scientific and engineering world for several decades. There are two kinds of high-frequency vibrations in general ship responses to a large ocean-going ship in its shipping line, so-called springing and whipping, which are important for the determination of design wave load and fatigue damage as well. Because of the huge scale of an ultra large ore carrier (ULOC), it will suffer seldom slamming events in the ocean. The resonance vibration with high frequency is springing, which is caused by continuous wave excitation. In this paper, the wave-induced vibrations of the ULOC are addressed by experimental and numerical methods according to 2D and 3D hydroelasticity theories and an elastic model under full-load and ballast conditions. The influence of loading conditions on high-frequency vibration is studied both by numerical and experimental results. Wave-induced vibrations are higher under ballast condition including the wave frequency part, the multiple frequencies part, the 2-node and the 3-node vertical bending parts of the hydroelastic responses. The predicted results from the 2D method have less accuracy than the 3D method especially under ballast condition because of the slender-body assumption in the former method. The applicability of the 2D method and the further development of nonlinear effects to 3D method in the prediction of hydroelastic responses of the ULOC are discussed.     

海雾生成过程中平流、湍流和辐射效应的数值试验

利用相对湿度方程,结合数值模式研究了在海雾生成过程中平流、湍流和辐射的效应。结果表明,海雾生成的主要“推动力”是长波辐射冷却,湍流冷却在低层主要发生在平流的初始阶段。随着时间的推移,湍流对低层大气很快变为起加热作用,不利于海雾的生成。湍流和辐射效应在低层大气中符号相反(仅在海雾生成的初始阶段符号相同),量级相同,在高层大气中湍流和辐射效应符号相同,但辐射效应占优势。湍流效应和辐射效应是影响海雾生成的主要因素,平流直接作用似乎不大。平流、湍流和辐射效应及其总效应均随时间推移而减小。另外,还初步研究了风速大小和海温高低对平流、湍流和辐射效应及海雾生成的影响。     

浅谈低空无人机航摄试验

本文介绍了浙江省进行的低空无人机航摄试验,较为详细地描述了试验条件,对获取的无人机航摄影像进行的后处理技术与取得的相应的成果进行了说明,并对成果进行了分析评价。     

人工挖孔桩桩端土承载力的确定

城市建设中高层建筑越来越多．基础大多采用单桩承栽能力很高的人工挖孔灌注桩。既保证桩基工程的安全．又能节省工程造价．桩端土承栽力参数的确定在基础工程设计中是十分重要的。本文提出了应用深层平板栽荷试验方法能够较准确的提供桩端土承栽力参数．并在不同地质条件下进行了试验．积累了本地区的一些经验;同时认为在桩端土为中粗砂、泥岩时,应用效果很好;桩端土为粘性土时,应用效果较差。     

针对城市规划专业特色的GIS教学改革实验

城市规划专业的GIS课程教学具有一定的独特性和复杂性,通过理论与实践的紧密结合,设置与城市规划相关的课程项目"城市避难场所规划设计",贯穿整个GIS课程教学过程,有效地提高了学生的主观能动性和GIS技能的综合运用能力,对推进城市规划专业GIS课程的教学具有很好的参考价值。     

LINEAR QUADRATIC REGULATOR FOR STRUCTURE UNDER ON-LINE PREDICTED FUTURE SEISMIC EXCITATION

A predictive-adaptive (PA) control algorithm has been developed for a structure under a seismic excitation. This algorithm analyses information of an observed seismic excitation, estimates future structural responses and determines the control force for the structure, based on the linear quadratic regulator. That is, at a given moment t_k: (1) seismic excitation information is converted to an autoregressive model, which forms the state equation for the excitation; (2) the identification model is combined with the structural model to build a state equation in an augmented space; (3) the weighted quadratic norm of the state vector and the future control force is formed as a cost function for estimating future responses; (4) the Ricatti equation is solved to find the optimum value of the cost function; and (5) the optimum gain matrix is obtained, and the control force is determined. The PA algorithm is not restricted to one type of control system, but can be applied to both an active driver system and an active tendon system. Its effectiveness is confirmed by numerical experiments for 1DOF and 3DOF structural models under sine and seismic excitations.     

Richtmyer–Meshkov Instability Reshock Experiments Using Laser-Driven Double-Cylinder Implosions

As a shock travels through the interface between substances of different densities, existing perturbations can grow via the Richtmyer–Meshkov (RM) instability. The study of the RM instability in a convergent geometry leads to a better understanding of implosions applicable to inertial confinement fusion and various astrophysical events, such as core-collapse supernovae. We present results of laser-driven double-cylinder implosions performed at the Omega laser facility with an emphasis on sending a second shock through an already shocked RM unstable interface. The uniform reshock of a cylindrical interface is achieved by inserting a second cylinder inside the first that reflects the inwardly traveling shock and causes it to interact a second time with the unstable interface. We present an analysis of the instability growth as a function of shock strength and zero-order perturbation behavior during reshock.