开放式层次化物理实验教学体系网络管理平台建设

开放式层次化物理实验教学系统的建立和运行需要一个功能强大的网络管理平台支持和保障.介绍了开放式层次化的物理实验教学体系内涵,重点介绍其网络管理平台的设计、功能、使用效果和应用前景.     

湛江市鸡球虫病调查及防治对策

调查湛江市五县 (市 )和市区鸡场发现 ,鸡球虫感染在湛江市普遍存在 ,感染率在 90 %以上 ,用球佳 (Diclazuril)、速丹 (Halofuginone)、氨丙啉 (Amprol)等药物进行化学预防 ,取得较好效果 ,其中球佳抗球虫指数达 180 ;同时 ,针对湛江市鸡球虫病防制状况及药物的使用情况提出了改进措施     

黄海对流云街数值模拟与敏感性试验

2015年11月25日黄海上空冷空气爆发,中国北部发生暴雪,西北东南向云街在黄海上空大面积密集分布。为研究垂直热输运的网格大小依赖性是否会对黄海对流云街数值模拟产生影响,本文利用WRF模式,分别采用考虑网格大小依赖性的边界层（PBL）参数化方案和基于非局部K理论闭合的YSU PBL方案对该个例进行数值模拟。结果表明两方案均能较好地再现云街出现区域和盛行风向。由于考虑网格大小依赖性的PBL方案模拟水平滚涡对流和次级环流的能力更强,所模拟的水平垂直速度强度更大,云水混合比更高,促进更多的云得以发展;同时其稳定性参数ζ更小,模拟的水平滚涡对流强度更大。     

时间不连续压力序列的傅立叶分析方法

提出了一种用于对不连续压力采样序列的傅立叶分析方法.此方法将周期函数展开成傅立叶级数,但在数值积分时取函数周期内有采样值的区间作为积分域,然后求解线性方程组得到傅立叶级数的系数值.为了检验本方法的有效性,利用此方法对解析函数进行了拟合,当一个周期内的取样时间大于1/2周期时,利用此方法能够得到满意的结果.利用实验方法研究了波浪作用下截断圆柱表面的压力分布.在波浪作用下静水面附近的测点在露出水面时没有压力值.利用所提出的傅立叶分析方法对略低于静水面位置的实测压力进行了分析,拟合结果与实测结果吻合很好,说明此方法在处理物理模型实验中间断采样得到的数据是有效的.利用数值方法对波浪压力进行了计算,并将一阶和二阶波压力的数值结果与实测值进行了比较.     

海雾生成过程中平流、湍流和辐射效应的数值试验

利用相对湿度方程,结合数值模式研究了在海雾生成过程中平流、湍流和辐射的效应。结果表明,海雾生成的主要“推动力”是长波辐射冷却,湍流冷却在低层主要发生在平流的初始阶段。随着时间的推移,湍流对低层大气很快变为起加热作用,不利于海雾的生成。湍流和辐射效应在低层大气中符号相反(仅在海雾生成的初始阶段符号相同),量级相同,在高层大气中湍流和辐射效应符号相同,但辐射效应占优势。湍流效应和辐射效应是影响海雾生成的主要因素,平流直接作用似乎不大。平流、湍流和辐射效应及其总效应均随时间推移而减小。另外,还初步研究了风速大小和海温高低对平流、湍流和辐射效应及海雾生成的影响。     

南海及邻近海域异常海温影响局域大气环流的初步试验

南海及邻近海域表层海温（SST）异常的气候意义可以通过IAP－AGCM的数值模拟得到反映。数值试验表明，东亚大气环流对这种SST异常的响应具有时变性（或称季节性），在空间上维持一定的经向结构和纬向结构。确切地说，南海冷水年份，即南海和孟加拉湾负距平、西太平洋正距平的年份，2，3月份南海有东北风异常；夏季菲律宾附近维持一个反气旋式的差值环流，它的低频活动造成了这个地区九水场的低频振荡；与环流较一致的是夏季西太平洋副热带高压活动有所减弱、东移，造成了水汽经向输送的异常分布。     

对虾与鱼、贝类封闭式综合养殖的实验研究

于1995－1999年采用陆基实验围隔法系统地研究了对虾与鱼、贝类封闭式综合养殖的基础问题，所选取的材料为中国对虾、台湾红罗非鱼、缢蛏与海湾扇贝，研究出了4种优化结构养殖模式。结果表明，4种模式的组成及各成分间生物量（收获前）的比值分别为：对虾的养殖效果都比同样条件下的对虾单养模式显著优越；其中最好的虾、鱼、贝三元综合养殖模式将产量提高了28％，投入氮的利用率提高了85％。同时采取封闭式的养殖方法，向浅海输出的氮只占养殖输入氮的6％－8％，从而显著降低了对浅海的污染。     

基于人工地震资料的珠江口地区最小一维P波速度模型

珠江口地区位于南海北部大陆的边缘,具有洋陆过渡型地壳特征,且NE向滨海断裂带从其中穿过,强震风险不可忽视.文中基于2015年珠江口海陆联合三维人工地震探测数据,人工进行初至P波震相拾取,并使用VELEST程序分别反演了陆域和海域的最小一维P波速度模型(走时残差均方根最小)和台站校正结果.台站校正结果的空间分布与区域地形...     

Experiments on the resuspension of estuarine sediments containing benthic diatoms

A laboratory system was used to test the effect of water flow on the resuspension of mud and sand sediments and, specifically, benthic diatoms from the Ems estuary, The Netherlands. Current velocities generated by two rotating cylinders in a cylindrical tank were determined by a small float and a laser Doppler velocimeter. At low angular velocities, the amount of suspended matter increased linearly with angular velocity and the float current velocity. However, at higher angular velocities, the increase in current velocity was less because of the strong turbulence: concomitantly, the current velocity boundary layer (δ) became thinner and the suspended matter concentration increased rapidly. The dominant diatom species from the sandy sediment were suspended in two distinct groups, one of which consisted of the species Navicula aequorea, Navicula salinicola, Ophephora martyi and Opephora pacifica, and was more exclusively bound to sand grains than the other. The benthic diatom species inhabiting the silty sediment did not show this difference. The most important shortcoming in the experiments was the inability to determine the radial and vertical velocity components. This precluded reliable calculations of the shear stress. The data presented emphasize the importance of finding a method to determine the shear stress under experiments and field conditions so that direct comparisons can be made. Despite this it is assumed that, just as under the experimental conditions discussed, under natural conditions in shallow waters resuspension starts at current velocities as low as ca. 10 cm s⁻¹.     

Richtmyer–Meshkov Instability Reshock Experiments Using Laser-Driven Double-Cylinder Implosions

As a shock travels through the interface between substances of different densities, existing perturbations can grow via the Richtmyer–Meshkov (RM) instability. The study of the RM instability in a convergent geometry leads to a better understanding of implosions applicable to inertial confinement fusion and various astrophysical events, such as core-collapse supernovae. We present results of laser-driven double-cylinder implosions performed at the Omega laser facility with an emphasis on sending a second shock through an already shocked RM unstable interface. The uniform reshock of a cylindrical interface is achieved by inserting a second cylinder inside the first that reflects the inwardly traveling shock and causes it to interact a second time with the unstable interface. We present an analysis of the instability growth as a function of shock strength and zero-order perturbation behavior during reshock.