Sensitivity assessment of strontium isotope as indicator of polluted groundwater for hydraulic fracturing flowback fluids produced in the Dameigou Shale of Qaidam Basin

Hydrogeochemical processes that would occur in polluted groundwater and aquifer system, may reduce the sensitivity of Sr isotope being the indicator of hydraulic fracturing flowback fluids(HFFF) in groundwater. In this paper, the Dameigou shale gas field in the northern Qaidam Basin was taken as the study area, where the hydrogeochemical processes affecting Sr isotope was analysed. Then, the model for Sr isotope in HFFF-polluted groundwater was constructed to assess the sensitivity of Sr isotope as HFFF indicator. The results show that the dissolution can release little Sr to polluted groundwater and cannot affect the εSr(the deviation of the 87 Sr/86 Sr ratio) of polluted groundwater. In the meantime, cation exchange can considerably affect Sr composition in the polluted groundwater. The Sr with low εSr is constantly released to groundwater from the solid phase of aquifer media by cation exchange with pollution of Quaternary groundwater by the HFFF and it accounts for 4.6% and 11.0% of Sr in polluted groundwater when the HFFF flux reaches 10% and 30% of the polluted groundwater, respectively. However, the Sr from cation exchange has limited impact on Sr isotope in polluted groundwater. Addition of Sr from cation exchange would only cause a 0.2% and 1.2% decrease in εSr of the polluted groundwater when the HFFF flux reaches 10% and 30% of the polluted groundwater, respectively. These results demonstrate that hydrogeochemical processes have little effect on the sensitivity of Sr isotope being the HFFF indicator in groundwater of the study area. For the scenario of groundwater pollution by HFFF, when the HFFF accounts for 5%(in volume percentage) of the polluted groundwater, the HFFF can result in detectable shifts of εSr(ΔεSr=0.86) in natural groundwater. Therefore, after consideration of hydrogeochemical processes occurred in aquifer with input of the HFFF, Sr isotope is still a sensitive indicator of the Quaternary groundwater pollution by the HFFF produced in the Dameigou shale of Qaidam Basin.     

Digital Archiving and On-line Publishing of Old Relief Models

Abstract

Although people rarely think of relief models when speaking about cartographic products, these artefacts are probably the most impressive way of visualizing landscapes. Unlike traditional maps or globes, most relief models are unique, vulnerable hand-made objects. Digital archiving is an important step in their preservation. There are special tools for this task, but these equipments are rather expensive, and libraries or other institutes that usually own these models cannot spend too much. The authors examined various on-line tools to create digital 3D representation of relief models using a set of photographs as source. These tools create point cloud and textured triangle mesh based on matching patterns on the photos. A workflow was developed which uses these web services and produces the digital 3D version of relief models. This paper introduces the method, discusses the details of successful photographing, the possible post-processing of the results. A new web site, using the X3DOM technology to show the digitized models to the general public, is also introduced.     

A Case Study on the Effects of Heterogeneous Soil Moisture on Mesoscale Boundary-Layer Structure in the Southern Great Plains, U.S.A. Part II: Mesoscale Modelling

The importance of soil moisture inputs and improved model physics in the prediction of the daytime boundary-layer structure during the Southern Great Plains Hydrology Experiment 1997 (SGP97) is investigated using the non-hydrostatic fifth-generation Pennsylvania State University/National Center for Atmospheric Research (PSU/NCAR) Mesoscale Model MM5. This is Part II of a two-part study examining the relationship of surface heterogeneity to observed boundary-layer structure. Part I focuses on observations and utilizes a simple model while Part II uses observations and MM5 modelling. Soil moisture inputs tested include a lookup table based on soil type and season, output from an offline land-surface model (LSM) forced by atmospheric observations, and high-resolution ( 800 m) airborne microwave remotely sensed data. Model physics improvements are investigated by comparing an LSM directly coupled with the MM5 to a simpler force-restore method at the surface. The scale of land surface heterogeneities is compared to the scale of their effects on boundary-layer structure.The use of more detailed soil moisture fields allowed the MM5 to better represent the large-scale (hundreds of km) and small-scale (tens of km) horizontal gradients in surface-layer weather and, to a lesser degree, the atmospheric boundary-layer (ABL) height, which was evaluated against observations measured by differential absorption lidar (DIAL). The benefits of coupling an LSM to the MM5 were not readily evident in this summertime case, with the model having particular difficulty simulating the timing of maximum surface fluxes while underestimating the depth of the mixed layer.     

Damage identification method using harmonic excitation force considering both modelling and measurement errors

A method of structural damage identification using harmonic excitation force is presented. It considers the effects of both measurement and modelling errors in the baseline finite element model. Damage that accompanies changes in structural parameters can be estimated for a damaged structure from the change between measured vibration responses and ones calculated from the analytical model of the intact structure. In practice, modelling errors exist in the analytical model due to material and geometric uncertainties and a reduction in the degrees of freedom as well as measurement errors, making identification difficult. To surmount these problems, bootstrap hypothesis testing, which enables statistical judgment without information about these errors, was introduced. The method was validated by numerical simulation using a three‐dimensional frame structure and real vibration data for a three‐storey steel frame structure. Copyright © 2005 John Wiley & Sons, Ltd.     

Dust supply from river floodplains: the case of the lower Huang He (Yellow River) recorded in a loess–palaeosol sequence from the Mangshan Plateau

The Mangshan Plateau is located on the south bank of the Huang He (Yellow River) just west of the city of Zhengzhou, well outside the Loess Plateau in central China. Mixing models of the grain‐size data indicate that the loess deposits are mixtures of three loess components. Comparison of the mixing model with existing models established for a series of loess–palaeosol sequences from the Loess Plateau indicates that the Mangshan loess has been supplied from a proximal dust source, the Huang He floodplain, during major dust outbreaks. The high accumulation rates, the composition of the loess components, and especially the high proportions of a sandy loess component support this. Owing to the exceptionally high accumulation rates, the Mangshan grain size, magnetic susceptibility and carbonate records provide a high‐resolution archive of environmental and climate change. Copyright © 2008 John Wiley & Sons, Ltd.     

Estimating the uncertainty in simulating the impacts of small farm dams on streamflow regimes in South Africa

Abstract

Small dams represent an important local-scale resource designed to increase water supply reliability in many parts of the world where hydrological variability is high. There is evidence that the number of farm dams has increased substantially over the last few decades. These developments can have a substantial impact on downstream flow volumes and patterns, water use and ecological functioning. The study reports on the application of a hydrological modelling approach to investigate the uncertainty associated with simulating the impacts of farm dams in several South African catchments. The focus of the study is on sensitivity analysis and the limitations of the data that would be typically available for water resources assessments. The uncertainty mainly arises from the methods and information that are available to estimate the dam properties and the water use from the dams. The impacts are not only related to the number and size of dams, but also the extent to which they are used for water supply as well as the nature of the climate and the natural hydrological regimes. The biggest source of uncertainty in South Africa appears to be associated with a lack of reliable information on volumes and patterns of water abstraction from the dams.

Citation Hughes, D. A. & Mantel, S. K. (2010) Estimating the uncertainty in simulating the impacts of small farm dams on streamflow regimes in South Africa. Hydrol. Sci. J. 55(4), 578–592.     

Modelling regional effects of artificial groundwater recharge in a multilayer aquifer characterized by perched water tables

This paper presents an approach to estimate the effects of a managed recharge experiment in a multilayer aquifer characterized by the presence of perched water tables in the Medina del Campo groundwater body, Douro basin, central Spain. A numerical model was developed to evaluate the effect of artificial recharge on the shallow sector of a regional-scale aquifer and on formerly active wetlands. The model was developed in the Visual MODFLOW Pro v.2011.1 environment in order to represent and analyse the regional impact of this artificial recharge event. Results suggest that the assumption of a single perched system may prove useful in regional contexts where data is limited. From a study site perspective, managed recharge is observed to increase shallow storage along the riverbanks, which is considered valuable for environmental purposes. However, downstream wetlands are unlikely to experience a significant recovery. Furthermore, only a small percentage of artificial recharge is expected to reach the deep regional aquifer. This method can be exported to settings characterized by the presence of perched aquifers and associated groundwater dependent ecosystems.     

贡湖及其相关水域风生流模拟研究

在太湖风生流的数值模拟研究的基础上，设计模拟贡湖及其相关水域风生流的套网格数值模式。应用该模式研究不同风情下，梅梁湖，太湖主体湖水对贡湖的影响。     

A smoothed particle hydrodynamics modelling of soil–water mixing and resulting changes in average strength

Soil–water interaction is a pivotal process in many underwater geohazards such as underwater landslides where soil sediments gradually evolve into turbidity currents after interactions with ambient water. Due to the large deformations, multiphase interactions and phase changes this involves, investigations from numerical modelling of the transition process have been limited so far. This study explores a simple numerical replication of such soil–water mixing with respect to changes in average strength using smoothed particle hydrodynamics (SPH). A uniform viscoplastic model is used for both the solid-like and fluid-like SPH particles. The proposed numerical solution scheme is verified by single-phase dam break tests and multiphase simple shear tests. SPH combinations of solid-like and fluid-like particles can replicate the clay–water mixture as long as the liquidity index of the solid-like particles is larger than unity. The proposed numerical scheme is shown to capture key features of an underwater landslide such as hydroplaning, water entrainment and wave generation and thus shows promise as a tool to simulate the whole process of subaquatic geohazards involving solid–fluid transition during mass transport.