川南观音场-瓦市地区须家河组六段储层特征及其控制因素

通过对4条野外剖面、40口并岩心样品及84张薄片的观察和测井等资料的分析,对川南观音场一瓦市地区须六段的岩石学特征、孔隙类型、孔隙结构及孔渗特征等进行了深入研究。结果表明：川南地区须六段岩性主要为中-细粒长石岩屑砂岩和岩屑石英砂岩,孔隙度在6％～10％之间,平均孔隙度为7．3％。渗透率为0．03×10^-3μm^2～0．9×1010^-3μm^2平均渗透率为0．177×1010^-3μm^2储层属于典型的低孔低渗储层,储集空间主要为粒间孔和粒内溶孔。在平面上,储层物性受沉积相带的控制;在垂向上,随深度的增加,压实作用和胶结作用使物性急剧变差。绿泥石的环边胶结作用、长石的溶蚀作用对储层物性起建设性作用,构造作用极大地改善了储层的物性。     

青海五道梁地区渐新统雅西错组地球化学特征及成矿作用浅析

以五道梁地区1∶20万水系沉积物测量更新数据为基础,以渐新统雅西错组为研究对象,利用地层汇水域水系沉积物测量元素原始数据进行了参数统计,通过相对丰度、R型聚类分析和因子分析,分析了地层中各元素的含量分布特征及元素间的亲疏关系,进一步浅析了地层在成矿中的作用.认为雅西错组高钙碳酸盐岩建造环境显著,Ba、Sr、Ag、As、Cd、Mo在地层中有不同程度的富集.地层有一定的含矿性,其中Ag趋向于与黏土岩伴随的硅质砂岩类中,其他在碳酸盐岩中.在后期岩浆热源作用下,主要成矿元素能进一步富集成异常或成矿.     

准噶尔盆地南缘中段下组合储层特征及控制因素分析

准噶尔盆地南缘中段下部成藏组合主要包括侏罗系和下白垩统.通过对研究区已有的探井取心及野外露头资料的研究,对下白垩统清水河组、上侏罗统喀拉扎组和齐古组3套储层的沉积特征及其控制因素进行了分析研究,认为研究区储层具有较低成分成熟度、低-中等及中等-较好的结构成熟度,压实作用和胶结作用是原生孔隙损失的主要因素.     

豫西寒武纪叠层石的地层展布及控制因素分析

在河南省西部寒武系的渑池-登封小区,共出露23层叠层石,主要集中在馒头组、张夏组和三山子组.笔者在逐层详细描述该叠层石外部宏观形态和地层展布的基础上,分析了叠层石上下地层岩相变化,找出寒武纪叠层石地层展布的规律及其控制因素,认为影响叠层石地层展布的主要因素有沉积环境、水动力条件和后生动物干扰等,并讨论了叠层石生长与核形石、竹叶状灰岩和后生动物的相互关系,提出了叠层石与后生动物共生的生态位观点     

塔河油田十二区奥陶系油气分布规律及控制因素

塔河油田十二区奥陶系油藏为碳酸盐岩岩溶缝洞型油藏,油气水分布规律复杂。对原油的物理性质、平面及纵向上的分布特征、油水界面等的分析表明,区内主要为高黏度、含蜡、高含硫的超重质原油。平面上密度分布呈西部和东部低、中部高的特点;纵向上原油密度与深度关系不大。高产油区多沿主断裂带分布。油水界面不统一,但从东向西随中奥陶统顶面的降低而降低。认为该区油气分布不受现今构造位置高低的控制,而是受区域构造背景、断裂带的分布、储集层的发育程度、成藏演化过程以及不整合面等因素综合控制。     

Quantitative urban climate mapping based on a geographical database: A simulation approach using Hong Kong as a case study

The urban environment has been dramatically changed by artificial constructions. How the modified urban geometry affects the urban climate and therefore human thermal comfort has become a primary concern for urban planners. The present study takes a simulation approach to analyze the influence of urban geometry on the urban climate and maps this climatic understanding from a quantitative perspective. A geographical building database is used to characterize two widely discussed aspects: urban heat island effect (UHI) and wind dynamics. The parameters of the sky view factor (SVF) and the frontal area density (FAD) are simulated using ArcGIS-embedded computer programs to link urban geometry with the UHI and wind dynamic conditions. The simulated results are synergized and classified to evaluate different urban climatic conditions based on thermal comfort consideration. A climatic map is then generated implementing the classification. The climatic map shows reasonable agreement with thermal comfort understanding, as indicated by the biometeorological index of the physiological equivalent temperature (PET) obtained in an earlier study. The proposed climate mapping approach can provide both quantitative and visual evaluation of the urban environment for urban planners with climatic concerns. The map could be used as a decision support tool in planning and policy-making processes. An urban area in Hong Kong is used as a case study.     

Photographic assessment of retroreflective film properties

Retroreflective film is used widely for target manufacture in close-range photogrammetry, especially where high precision is required for applications in industrial or engineering metrology. 3M Scotchlite 7610 high gain reflective sheeting is the gold standard for retroreflective targets because of the high level of response for incidence angles up to 60°. Retroreflective film is now widely used in the transport industry for signage and many other types of film have become available. This study reports on the performance of six types of retroreflective sheeting, including 7610, based on published metrics for reflectance. Measurements were made using a camera and flash, so as to be directly applicable to photogrammetry. Analysis of the results from this project and the assessment of previous research indicates that the use of standards is essential to enable a valid comparison of retroreflective performance.     

Changes of P, Ca, Al and Fe contents in fringe marshes along a pedogenic chronosequence in the Pearl River estuary, South China

Soil and plant samples were collected in four fringe marsh zones (i.e., A, B, C and D zones) along a pedogenic chronosequence in the Pearl River estuary in the Spring of 2009. Samples were subjected to a total digestion technique and analyzed for P, Ca, Al and Fe in order to study the changes of nutrient contents, storages in soils and their bioavailabilities to wetland plants (e.g. Cyperus malaccensis) in four zones. Results showed that soil Ca increased with depth along soil profiles, while P, Al and Fe generally kept constant in soil profiles in four zones. Al and Fe contents in the top 10 cm soils showed significant decreases from D to A zone, while a significant increase in Ca contents (P<0.05). Significant increases along pedogenic chronosequence for P, Al and Fe at 30-40 cm soil horizons were also observed. Ca was mainly accumulated in plant aboveground parts; Al and Fe were accumulated in the belowground parts; while P was homogenously distributed among the tissues of C. malaccensis. C. malaccensis in D zone had lower Bio-concentration factors (BCFs) of P in the shoots and Al and Fe in the roots, and higher values of Ca in the shoots than those in older zones (P<0.05). Compared to Al and Fe, both Ca and P had relatively higher translocation capacities for C. malaccensis, while only lower TFs for P and higher values for Al and Fe in D zone were observed than those in A and B zones (P<0.05). Except for Al with no significant changes, the total BCFs for P and Fe showed an increasing trend with soil ages, while a decreasing trend for Ca. The total bio-storage factors (TBSFs) of P and Ca declined with the pedogenic time, whereas an increase for Fe. The results of this study can contribute to the wetland conservation and management in the Pearl River estuarine region.     

Geometry Relations with Bed Load Formulae for Alluvial Boundaries

Employing bed load formulae hydraulic geometry relations were derived for stream width, sediment transport velocity, and bed slope. The relations were examined in terms of friction factor, bed load discharge, bed load diameter, and water discharge. Two fundamental approaches to the prediction of hydraulic geometry have been developed. The first and most widely adopted approach is based on empirical equations whereas the second is based on solution of the governing equations of flow. The applied bed load formulae belong to different authors. Here, the comparison with the other derived relations is presented.     

火山岩风化体储层控制因素研究—以三塘湖盆地石炭系卡拉岗组为例

针对火山岩风化壳储层控制因素和成因复杂的难题,以三塘湖盆地石炭系卡拉岗组为例,在搞清晚石炭世构造环境和岩性特征基础上,提出风化淋滤和断裂改造是火山岩风化壳形成有利储层的主要控制因素.不同火山岩岩性经风化淋滤后储层物性均增大并能形成有利储层,储集层孔隙类型以次生溶蚀孔隙和裂缝为主,具双峰分布特征.建立了5层结构模型,并提...