云南官房铜矿床矿石矿物特征及银的赋存状态

通过显微镜鉴定、电子探针(EPMA)及扫描电镜能谱分析(SEM/EDS)等方法,首次对官房铜矿的矿物组合和银的赋存状态进行了研究。初步查明,矿石矿物为中-低温热液成因,并受火山机构及断裂构造的控制;银矿物主要为碲银矿和辉银矿。矿石中银与铜呈明显正相关关系,而方铅矿中不含银。银主要以类质同象的形式赋存于含铜矿物或黄铁矿中;银的独立矿物含量低,且多呈包裹体的形式存在于黄铜矿、斑铜矿及黄铁矿中,或以微细粒状赋存于矿物颗粒间和斑铜矿的表面。     

赣南淘锡坑钨多金属矿床花岗岩和云英岩岩石特征及云英岩中白云母40Ar/39Ar定年

赣南崇义县淘锡坑钨矿位于南岭东西向构造带东段,属于以黑钨矿石英脉型为主的钨多金属矿床。矿床形成与燕山期中酸性岩浆作用有密切关系,石英矿脉受一组北西向断裂控制,穿切新元古界。本文在淘锡坑钨矿区3个揭露到花岗岩体顶部的中段（206、106、56中段）采集到岩体顶部云英岩样品,利用40Ar/39Ar同位素定年测得云英岩中的白云母的坪年龄分别为152.7 ± 1.5 Ma（206中段）,153.4 ± 1.3 Ma（106中段）,155.0 ± 1.4 Ma（56中段）。与前人用其他方法测定的花岗岩成岩和成矿年龄几乎一致。花岗岩和云英岩全岩稀土元素均具有M型四分组效应和强烈的Eu亏损特征,反映出花岗质岩浆经历了高度分异演化及其岩体结晶晚期流体/熔体相互作用。综合前人在南岭地区同类矿床的研究资料,可知南岭地区160～150Ma成岩成矿作用主要分布于南岭中-东段,可能为大陆边缘弧后岩石圈伸展的构造动力学背景的产物。     

山东省济宁强磁异常区深部铁矿初步验证及其意义

山东省济宁磁异常是一个重、磁同源体,面积大于100 km2,磁异常峰值为3800nT。钻探验证在孔深1041.57～1796.54m位置发现铁矿体,矿体总厚度74.04～220m,磁性铁平均品位15.89～25.19%。矿石类型有条带状方解磁铁石英岩和条带状磁铁石英大理岩,矿石的主要组成矿物为石英、方解石、磁铁矿、磁赤铁矿、菱铁矿。矿体产于济宁岩群浅变质岩系中,矿床特征与条带状铁建造（BIF）铁矿或鞍山式铁矿有明显区别,铁矿成因类型属与千枚岩、变质中酸性火山岩、大理岩有关的沉积变质型铁矿床。该区铁矿资源潜力巨大。     

江西浒坑钨矿含矿石英脉的地质特征及成矿构造演化

位于赣西武功山地区的江西浒坑钨矿是一个大型石英脉型钨矿床,与赣南典型的“五层楼”模式不同,矿脉主要集中在岩体内接触带。含矿石英脉除了普通的块状构造以外,还普遍存在条带状构造。详细的野外编录和镜下研究表明含矿块状石英脉在形成后遭受不同程度的韧性剪切,从而形成不同成分的分异条带。剪切带以出现新生的面理和线理（拉伸线理）为特征。岩石学研究表明条带状矿石属于糜棱岩,具有丰富的塑性变形显微构造特征。通过对含矿石英脉的构造解析,认为与岩浆岩有关的原生节理系统基本上是同时形成的,沿节理充填的石英脉经历了长期的、多期次的构造运动,从而形成了复杂的石英脉和矿石类型。建立了原生节理形成→石英充填→韧性剪切发生→二期石英充填→脆性碎裂的矿区构造演化序列。韧性剪切作用的动力学背景可能是受后期岩浆侵入的影响,最后的脆性破裂应与区域上存在南北向的压应力有关。     

江西省武功山地区浒坑钨矿床的Re-Os年龄及其地质意义

浒坑钨矿床是位于江西省中部武功山成矿带的大型石英脉型黑钨矿床。为了确定该矿床的成矿时代,笔者选取了浒坑含钨石英脉中与黑钨矿共生的辉钼矿进行了高精度Re-Os同位素定年,并获得5个辉钼矿样品的Re-Os等时线年龄和模式加权平均年龄分别为150.2±2.2Ma和149.82±0.92Ma。测年数据表明浒坑钨矿床的成矿时代为150Ma左右,是华南地区中生代大规模成岩成矿作用高峰期的产物。辉钼矿含铼较低,表明成矿物质可能来自壳源,与形成浒坑花岗岩体的燕山期重熔S型花岗岩岩浆活动有关。该矿床形成于燕山期岩石圈伸展减薄环境。     

Application of MODFLOW and geographic information system to groundwater flow simulation in North China Plain, China

MODFLOW is a groundwater modeling program. It can be compiled and remedied according to the practical applications. Because of its structure and fixed data format, MODFLOW can be integrated with Geographic Information Systems (GIS) technology for water resource management. The North China Plain (NCP), which is the politic, economic and cultural center of China, is facing with water resources shortage and water pollution. Groundwater is the main water resource for industrial, agricultural and domestic usage. It is necessary to evaluate the groundwater resources of the NCP as an entire aquifer system. With the development of computer and internet information technology it is also necessary to integrate the groundwater model with the GIS technology. Because the geological and hydrogeological data in the NCP was mainly in MAPGIS format, the powerful function of GIS of disposing of and analyzing spatial data and computer languages such as Visual C and Visual Basic were used to define the relationship between the original data and model data. After analyzing the geological and hydrogeological conditions of the NCP, the groundwater flow numerical simulation modeling was constructed with MODFLOW. On the basis of GIS, a dynamic evaluation system for groundwater resources under the internet circumstance was completed. During the process of constructing the groundwater model, a water budget was analyzed, which showed a negative budget in the NCP. The simulation period was from 1 January 2002 to 31 December 2003. During this period, the total recharge of the groundwater system was 49,374 × 10⁶ m³ and the total discharge was 56,530 × 10⁶ m³ the budget deficit was −7,156 × 10⁶ m³. In this integrated system, the original data including graphs and attribution data could be stored in the database. When the process of evaluating and predicting groundwater flow was started, these data were transformed into files that the core program of MODFLOW could read. The calculated water level and drawdown could be displayed and reviewed online.     

Determination of historical emission of heavy metals into the atmosphere: Celje case study

The research shows that in the Celje area (Slovenia), the historical anthropogenical emissions are 1,712 tons of Zn and 9.1 tons of Cd. For Zn, this value represents approximately 0.3% of the total Zn production in that area. Close to the former zinc smelting plant, the “Zn precipitation” has been estimated to be up to 0.036 mm. The 100-year Zn production left behind a heavily contaminated area with maximum concentrations of Zn of up to 5.6% in attic dust and 0.85% in the soil, and 456 mg/kg of Cd in attic dust and 59.1 mg/kg in the soil. The calculation of historical emissions is based on the data of heavy metals concentration in the attic dust at 98 sampling points and on the data from 19 measurement sites of the weight of total monthly air deposit. The main idea behind determining past emissions is that when the weight of the deposited dust on a small area is multiplied by the concentration of the element in that area, the mass of the polluter which has been transported to the place of interest by air can be calculated. If we sum up all the weight over the whole geochemical anomaly, we get the quantity of historical emissions.     

Origin of Fe-Ti Oxide Ores in Mafic Intrusions: Evidence from the Panzhihua Intrusion, SW China

Economic concentrations of Fe–Ti oxides occur as massive,conformable lenses or layers in the lower part of the Panzhihuaintrusion, Emeishan Large Igneous Province, SW China. Mineralchemistry, textures and QUILF equilibria indicate that oxidesin rocks of the intrusion were subjected to extensive subsolidusre-equilibration and exsolution. The primary oxide, reconstructedfrom compositions of titanomagnetite in the ores and associatedintergrowths, is an aluminous titanomagnetite (Usp₄₀) with 40wt % FeO, 34 wt % Fe₂O₃, 16·5 wt % TiO₂, 5·3 wt% Al₂O₃, 3·5 wt % MgO and 0·5 wt % MnO. This compositionis similar to the bulk composition of the oxide ore, as inferredfrom whole-rock data. This similarity strongly suggests thatthe ores formed from accumulation of titanomagnetite crystals,not from immiscible oxide melt as proposed in earlier studies.The occurrence of oxide ores in the lower parts of the Panzhihuaintrusion is best explained by settling and sorting of densetitanomagnetite in the ferrogabbroic parental magma. This magmamust have crystallized Fe–Ti oxides relatively early andabundantly, and is likely to have been enriched in Fe and Tibut poor in SiO₂. These features are consistent with fractionationof mantle-derived melts under relatively high pressures (10kbar), followed by emplacement of the residual magma at 5 kbar.This study provides definitive field and geochemical evidencethat Fe–Ti oxide ores can form by accumulation in ferrogabbro.We suggest that many other massive Fe–Ti oxide depositsmay have formed in a similar fashion and that high concentrationsof phosphorus or carbon, or periodic fluctuation of fO₂ in themagma, are of secondary importance in ore formation. KEY WORDS: ELIP; Fe–Ti oxide ore; layered intrusion; Panzhihua; QUILF     

Flood hazard delineation combining geomorphological and hydrological methods: an example in the Northern Iberian Peninsula

Flood mapping requires the combination and integration of geomorphological and hydrological-hydraulic methods; however, despite this, there is very little scientific literature that compares and validates both methods. Two types of analysis are addressed in the present article. On the one hand, maps of flood plains have been elaborated using geomorphological evidence and historical flood data in the mountainous area of northwestern Spain, covering an area of more then 232 km² of floodplains. On the other hand, a hydrometeorological model has been developed (Clark semidistributed unit hydrograph) in the Sarria River basin (155 km², NW Spain). This basin is not gauged, hence the model was subjected to a goodness-of-fit test of its parameter (curve number) by means of Monte Carlo simulation. The peak flows obtained by means of the hydrological model were used for hydraulic modeling (one-phase, one-dimensional and steady flow) in a 4 km² urban stretch of the river bed. The delineation of surface areas affected by floods since 1918, as well as those analyzed subsequent to the geomorphological study, reveals a high degree of reliability in the delineation of the flooded areas with frequent recurrence intervals (<50 years). If we compare these flooded surface areas with the estimate obtained by the hydrological-hydraulic method we can see that the latter method overestimates the extent of the surface water by 144% for very frequent recurrence intervals (>10 years) and underestimates it as the recurrence interval increases, by up to 80% less floodplain for exceptional events (>500 years). Finally, a management map is put forth combining the most reliable results available by integrating both methods. Originally presented at the Sixth International Conference on Geomorphology.