DGZ-1多功能共振柱常规试验可靠性分析

针对新研制的多功能共振柱讕验机常规土类试验,发展此类仪器的试验可靠性分析理论,建立一套检验自身可靠性的分析方法傌技术,包括试验误差分析、试验定量考核、土工试验等多种技术手段。首先建立了共振柱仪动剪切模量误差、应叐误差和阻尼比误差的分析公式,得到了几种主要影响因素及其对试验误差影响程度的新认识。同时,通过若干已知动剪切模量且频率和土频率相接近的钢杆和铝杆试件的自振和共振试验,定量上验证该仪器常规试验结果的可靠性;通过砂土和原状粘土常规试验,定性上检验土工试验结果的合理性。通过对新研制的多功能共振柱试验机的常规试验功能进行可靠性的自身检验,所有试验结果是令人满意和可靠的,结果符合现有规律的认识。     

北部湾地区海砂填料的动力特性分析

为研究北部湾地区海砂填料的动力特性,采用高级动态三轴测试系统开展循环荷载下的动三轴试验,研究不同围压及不同动应力幅值对海砂动力特性的影响规律。试验结果表明：轴向累计应变随围压增加而减小,围压150 kPa时振次10 000后应变仅为3%;随着动应力幅值的增大轴向累积应变随之增大,且达到破坏标准的时间越短。动弹性模量随着动应力幅值和围压的增加而增大,不同围压下动弹性模量随动应变的增加出现先骤减再略减后稳定的发展趋势,ε_d>0.3%后开始趋于稳定;不同动应力幅值下动弹性模量出现先增后减直至稳定的趋势,其中动应力幅值对动弹性模量有明显的影响,围压影响相对较小。孔压比随动应力幅值增加而减小,随围压增加而增加。     

Scaling wave impact pressures on vertical walls

It is widely recognized that the use of Froude similarity for scaling up wave impact pressures recorded during physical model tests may lead to over-estimation of impact maxima. Based on reviewing historical work dating back to the 30s and further developments in the 60s and 80s, a general method is presented that is suitable for scaling up impact pressures and rise times measured during small scale physical model tests. The method accounts for the effect of air leakage and is applicable to most wave impact loads. The model is applied to scale wave impact pressures on vertical walls and similar structures, and consistent correction factors for the Froude scaling law are derived.     

基于洪峰模数的山洪灾害雨量预警指标研究

山洪灾害预警是防御山洪的重要非工程措施,雨量预警指标是山洪灾害预警的关键。目前的雨量预警指标计算方法对水文气象资料条件以及模型建模率定都有很高的要求,并不适用于基层防汛人员。因此,本文基于全国山洪灾害调查评价成果数据,提出了一种运用洪峰模数计算雨量预警指标的简便、易用的方法。该方法以小流域洪水计算推理公式为基础,将公式中流量与流域面积的比值用洪峰模数表示,得到基于洪峰模数的临界雨量估算公式,并考虑流域土壤含水量等因素,分析临界雨量变化阈值,最终得到雨量预警指标。本文以云南省绥江县双河小流域为例,计算结果显示不同时段（1 h、3 h、6 h）净雨量和预警时段呈线性关系。降雨损失计算中洼地蓄水和植被截留在不同时段相同,土壤下渗在不同的时段不相同。在此基础上,计算不同土壤含水量条件下,不同时段的雨量预警指标。最后,对临界流量、降雨损失和预警指标进行了合理性分析,结果显示预警指标和调查评价结果及实测降雨都比较接近,计算的预警指标合理。本研究为基层山洪灾害预警提供了一种快速、便捷的预警指标计算方法,为预警指标计算提供技术支持。     

Nonlinear analysis of laterally loaded rigid piles in cohesive soil

This article presents a method for the nonlinear analysis of laterally loaded rigid piles in cohesive soil. The method considers the force and the moment equilibrium to derive the system equations for a rigid pile under a lateral eccentric load. The system equations are then solved using an iteration scheme to obtain the response of the pile. The method considers the nonlinear variation of the ultimate lateral soil resistance with depth and uses a new closed‐form expression proposed in this article to determine the lateral bearing factor. The method also considers the horizontal shear resistance at the pile base, and a bilinear relationship between the shear resistance and the displacement is used. For simplicity, the modulus of horizontal subgrade reaction is assumed to be constant with depth, which is applicable to piles in overconsolidated clay. The nonlinearity of the modulus of horizontal subgrade reaction with pile displacement at ground surface is also considered. The validity of the developed method is demonstrated by comparing its results with those of 3D finite element analysis. The applications of the developed method to analyze five field test piles also show good agreement between the predictions and the experimental results. The developed method offers an alternative approach for simple and effective analysis of laterally loaded rigid piles in cohesive soil. Copyright © 2011 John Wiley & Sons, Ltd.     

Attenuation properties of viscoelastic material

The attenuation properties of eight rheological models have been studied theoretically. The expressions forQ have been obtained by using dissipated and stored energies and/or complex modulus for each model. The dependence ofQ on frequency has been demonstrated. The three-element elastic model appears to be the best one to represent the viscoelastic nature of the earth's material for a finite value ofQ.     

非线性弹性模型的改进

本文在邓肯-张模型进行深入探讨的基础上,提出了切线模量实质物理意义是剪切模量的观点,并分别采用应力法和应变法推导了剪切模量和体积模量(或变形模量)公式,还进行了考虑Biot固结非线性弹性油罐地基有限元实例分析。对不同的变形模量计算方法进行了比较,提出了改进的非线性弹性模型。     

REPRESENTATION OF SPECTRA BY CONTINUOUS FUNCTIONS

A general framework for manipulating spectra as functions in traditional multivariate methods such asPCA and PLS is described.The functional representation is very convenient for compression,ensuringsmoothness and continuity.There are two fundamentally different types of representations:(a)byfunctions and(b)by function coefficients.The use of coefficients is the most practical way of analysis.     

Stress induced time dependent behavior of clayey soils

It is shown that time compression curve obtained from one-dimensional consolidation curve in the laboratory may include six phases. These are initial compression, first primary compression, transition from first primary compression to second primary compression, second primary compression, and transition from second primary compression to creep and lastly creep. This paper attempts to identify the quantitative beginnings and characteristics of these phases. A mathematical characteristic of all the soils that follow primary consolidation as per Terzaghi’s one dimensional consolidation theory is derived. It is known as the constant of primary consolidation. It is used to study the beginning of secondary consolidation and its effects on primary consolidation. Another characteristic of soils for creep and total absence of primary compression is derived. Methods are suggested for the determination of coefficients of Primary and Secondary consolidations and the compression index.