Effects of Young's modulus on fault displacement

Elastic crack models predict a linear relationship between displacement (u) and rupture (trace) length (L) during slip in a fault zone. Attempts to find universal-scaling laws for L/u, however, have generally failed. Here I propose that these attempts have failed because they do not take into account the changes in the mechanical properties, in particular Young's modulus (stiffness), of the fault zone as it evolves. I propose that Young's modulus affects fault displacement both spatially and temporally: spatially when the trace of a fault at a given time dissects host rocks of different stiffnesses, and temporally when the stiffness of the fault zone itself changes. During the evolution of an active fault zone, the effective Young's modulus of its damage zone and fault core normally decreases, and so does the L/u ratio of the fault. By contrast, during inactive periods sealing and healing of the damage zone and core may increase the stiffness, hence the L/u ratio in subsequent slips. This model predicts that not only will the scaling of L/u within a given fault population vary in space and time, but also that of individual faults. To cite this article: A. Gudmundsson, C. R. Geoscience 336 (2004).     

垫层对CFG桩复合地基影响的分析

对CFG桩复合地基垫层进行分析 ,探讨了垫层厚度和模量对桩土应力比、桩侧摩阻力、沉降变形、承载力的影响 ,并得出一些规律     

Structure de socle,sismostratigraphie et héritage structural au cours du rifting au niveau de la marge d'Ifni/Tan-Tan (Maroc sud-occidental)

Seismic reflection profiles from the Ifni/Tan-Tan Atlantic margin of southern Morocco, interpreted in the light of well data and field geology from the Western Anti-Atlas, allowed us to establish the seismostratigraphic framework of the syn-rift series and to reveal (i) a compressional structural style in the pre-Triassic basement similar to that established in the adjacent outcropping onshore basement but with an opposed western vergence, (ii) the importance of inherited anterior structures in the formation of Triassic-Liassic rift structures and (iii) an east–west propagation of these rift structures. To cite this article: N. AbouAli et al., C. R. Geoscience 337 (2005).     

Stress‐dependent elastic wave velocity of microfractured sandstone

A model for the stress‐dependent elastic wave velocity response of fractured rock mass is proposed based on experimental evidence of stress‐dependent fracture normal and shear stiffness. Previously proposed models and previous experimental studies on stress‐dependent fracture stiffness have been reviewed to provide a basis for the new model. Most of the existing stress‐dependent elastic wave velocity models are empirical, with model parameters that do not have clear physical meanings. To propose the new model, the rock mass is assumed to have randomly oriented microscopic fractures. In addition, the characteristic length of microfractures is assumed to be sufficiently short compared to the rock mass dimensions. The macroscopic stress‐dependent elastic wave velocity response is assumed to be attributed to the stress dependency of fracture stiffness. The stress‐dependent fracture normal stiffness is defined as a generalized power law function of effective normal stress, which is a modification of the Goodman's model. On the other hand, the stress dependency of fracture shear stiffness is modeled as a linear function of normal stress based on experimental data. Ultrasonic wave velocity responses of a dry core sample of Berea sandstone were tested at effective stresses ranging from 2 to 55 MPa. Visual observation of thin sections obtained from the Berea sandstone confirms that the assumptions made for microstructure of rock mass model are appropriate. It is shown that the model can describe the stress‐dependent ultrasonic wave velocity responses of dry Berea sandstone with a set of reasonable material parameter values. Published 2013. This article is a U.S. Government work and is in the public domain in the USA.     

不同刚度植物杆群对规则波传播及紊动特性影响研究

以不同刚度硅胶圆杆群为概化植物模型,测定其抗弯弹性模量,通过波浪水槽实验,研究规则波在不同刚度植物杆群内的流速分布、紊动特征及不同刚度杆群的消浪效果。实验结果表明,当波浪通过柔性杆群时,受其摆动的影响,流速周期变化从单峰型逐渐转变成双峰型,杆群刚度越小形成的二次波峰越明显;不同刚度杆群内水体紊动强度变化显示,杆群刚度越大,造成杆群内水体的紊动强度越大;随着杆群抗弯弹性模量的增大,其消浪系数也增大,消浪系数的增长与材料的抗弯弹性模量值非线性关系,而是在某一弹性模量范围内,对消浪系数的影响较为敏感。     

煤渣改良土的抗冻能力及损伤特性研究

为研究煤渣改良土作为季节冻土区路基填料的抗冻能力,以不同煤渣掺量及不同养护龄期下的煤渣改良土为研究对象,利用GDS三轴试验系统开展了不同冻融次数下改良土的三轴压缩试验,获得了最佳的煤渣掺量及养护时间数据,提出冻融及加载综合影响下改良土的总损伤变量,并据此建立了损伤本构关系。结果表明：改良土的抗冻能力随着煤渣掺入量的增大出现先增强后减弱的变化趋势,随龄期的增长而逐渐增强。冻融循环对改良土物理力学性质的影响主要集中在前5次循环过程,超过5次后影响逐渐减弱。冻融加载总损伤变量能够较好地反映冻融及加载过程中改良土性质的劣化,据此建立的损伤本构关系具有一定的精度,可以为季节冻土区煤渣改良土路基工程提供参考。     

确定砂土动剪切模量和阻尼比的方法对比

确定土体动剪切模量的常用方法有规范法、Kumar法和自相关函数法,确定相应阻尼比的方法有规范法、Das and Luo法、Kokusho法、Kumar法和互相关函数法,为了分析不同方法所产生差异,实现定量化对比分析,笔者以福建标准砂（粒径为0.5~1.0 mm）为研究对象,采用不排水的应力控制动三轴试验,探讨不同的确定土体动剪切模量和阻尼比方法的差异性,并给出了不同土体条件建议选用的方法。结果表明：1）3种方法确定动剪切模量的结果有一定的差异,随剪应变的增大结果的差异逐渐增大,有效围压对结果的差异性有所影响,当剪应变为4×10^-3,有效围压为100 kPa时,3种方法差异显著,相对误差最大接近20%;2）而5种方法确定阻尼比的结果差异显著,随着剪应变的增大,5种方法确定的阻尼比相对误差大体上均在迅速减小,只有规范法在有效围压为100 kPa时,其相对误差有较小的增大趋势;5种方法中,Kumar法确定的阻尼比最接近平均阻尼比,互相关函数法远高于平均阻尼比,Das and Luo法和Kokusho法确定的阻尼比基本一致但低于平均阻尼比。建议以后的工程应用中,加载方式为应力控制时,可采用自相关函数法确定动剪切模量,采用Kumar法确定阻尼比,二者确定的动剪切模量和阻尼比均最接近平均值。     

DGZ-1多功能共振柱常规试验可靠性分析

针对新研制的多功能共振柱讕验机常规土类试验,发展此类仪器的试验可靠性分析理论,建立一套检验自身可靠性的分析方法傌技术,包括试验误差分析、试验定量考核、土工试验等多种技术手段。首先建立了共振柱仪动剪切模量误差、应叐误差和阻尼比误差的分析公式,得到了几种主要影响因素及其对试验误差影响程度的新认识。同时,通过若干已知动剪切模量且频率和土频率相接近的钢杆和铝杆试件的自振和共振试验,定量上验证该仪器常规试验结果的可靠性;通过砂土和原状粘土常规试验,定性上检验土工试验结果的合理性。通过对新研制的多功能共振柱试验机的常规试验功能进行可靠性的自身检验,所有试验结果是令人满意和可靠的,结果符合现有规律的认识。     

北部湾地区海砂填料的动力特性分析

为研究北部湾地区海砂填料的动力特性,采用高级动态三轴测试系统开展循环荷载下的动三轴试验,研究不同围压及不同动应力幅值对海砂动力特性的影响规律。试验结果表明：轴向累计应变随围压增加而减小,围压150 kPa时振次10 000后应变仅为3%;随着动应力幅值的增大轴向累积应变随之增大,且达到破坏标准的时间越短。动弹性模量随着动应力幅值和围压的增加而增大,不同围压下动弹性模量随动应变的增加出现先骤减再略减后稳定的发展趋势,ε_d>0.3%后开始趋于稳定;不同动应力幅值下动弹性模量出现先增后减直至稳定的趋势,其中动应力幅值对动弹性模量有明显的影响,围压影响相对较小。孔压比随动应力幅值增加而减小,随围压增加而增加。     

真空预压联合碎石桩加固港口吹填堆场地基的试验研究

在港口工程建设中,快速加固超软弱的吹填地基,采用真空预压法是一个经济有效的方法,再联合以碎石桩加固则能进一步提高地基的承载力、减少地基工后沉降.通过真空预压联合碎石桩加固地基的现场试验以及观测资料的分析,得出真空预压联合碎石桩加固后地基的承载力特征值由原天然地基的60 kPa左右提高到220 kPa,计算结果表明打碎石桩后的地基变形模量Esp与真空预压后的Ea相比提高了1倍,联合碎石桩加固后的地基沉降量比仅经过真空预压的地基减少1/3.