一种大比例尺的滑坡风险区划方法——以延安市区黄土滑坡风险评价为例

介于区域性和单体滑坡之间,即对面积几十到上百平方千米的滑坡评价,适用于1∶5000~1∶25000之间的大比例尺,而如何对这类区域进行有效的滑坡风险评价是一个值得研究的问题。使用传统的基于GIS的单元栅格运算方法对这类区域进行滑坡风险评价,由于反映评价指标的基础数据精度与评价方法之间的不匹配,无论单元网格划分得如何精细,评价结果仍难达到精度要求。采用一种新的思路和方法,先期通过高精度数字高程模型(DEM)和Quick Bird遥感数据等多信息源,识别潜在的滑坡易发坡体,并初步圈画滑坡的危险区界线和进行承灾体信息解译,再逐一通过野外核查对以上信息加以验证、修正或取消,最后形成符合比例尺精度要求的风险评价图。实践证明,这是一种行之有效的进行大比例尺风险区划和评价的方法。     

Origin and quantitative source assessment of deep oils in the Tazhong Uplift,Tarim Basin

A large amount of deep oil has been discovered in the Tazhong Uplift, Tarim Basin whereas the oil source is still controversial. An integrated geochemical approach was utilized to unravel the characteristics, origin and alteration of the deep oils. This study showed that the Lower Cambrian oil from well ZS1C (

_1x) was featured by small or trace amounts of biomarkers, unusually high concentration of dibenzothiophenes (DBTs), high δ³⁴S of DBTs and high δ¹³C value of n-alkanes. These suggest a close genetic relationship with the Cambrian source rocks and TSR alteration. On the contrary, the Middle Cambrian oils from well ZS1 (

_2a) were characterized by low δ¹³C of n-alkanes and relatively high δ³⁴S of individual sulfur compounds and a general “V” shape of steranes, indicating a good genetic affinity with the Middle–Upper Ordovician source rocks. The middle Cambrian salt rock separating the oils was suggested to be one of the factors responsible for the differentiation. It was suggested that most of the deep oils in the Tazhong Uplift were mixed source based on biomarkers and carbon isotope, which contain TSR altered oil in varied degree. The percentage of the oils contributed by the Cambrian–Lower Ordovician was in the range of 19–100% (average 57%) controlled by several geological and geochemical events. Significant variations in the δ³⁴S values for individual compounds in the oils were observed suggesting a combination of different extent of TSR and thermal maturation alterations. The unusually high DBTs concentrations in the Tazhong-4 oilfield suggested as a result of mixing with the ZS1C oil (

_1x) and Lower Ordovician oils based on δ³⁴S values of DBT. This study will enhance our understanding of both deep and shallow oil sources in the Tazhong Uplift and clarify the formation mechanisms of the unusually high DBTs oils in the region.     

A multi-method approach to study the stability of natural slopes and landslide susceptibility mapping

In this paper, a multi-method approach for the assessment of the stability of natural slopes and landslide hazard mapping applied to the Dakar coastal region is presented. This approach is based on the effective combination of geotechnical field and laboratory works, of GIS, and of mechanical (deterministic and numerical) stability analysis. By using this approach, valuable results were gained regarding instability factors, landslide kinematics, simulation of slope failure and coastal erosion. This led to a thorough assessment and strong reduction in the subjectivity of the slope stability and hazard assessment and to the development of an objective landslide danger map of the SW coast of Dakar. Analysis of the results shows that the slides were influenced by the geotechnical properties of the soil, the weathering, the hydrogeological situation, and the erosion by waves. The landslide susceptibility assessment based on this methodological approach has allowed for an appropriate and adequate consideration of the multiple factors affecting the stability and the optimization of planning and investment for land development in the city.     

基于生物可利用性与宽浓度范围的Hakanson潜在生态风险指数法的创建——以小秦岭金矿区农田土壤为例

Hakanson潜在生态风险指数法是土壤重金属潜在生态风险评价的一种常用方法,研究与实践证明其有效性的同时,也发现了其不足之处:忽略了土壤重金属不同形态之间潜在生态风险的差异,且只重视重金属含量高于参考值时的生态风险,而对低于参考值时的情况没有给予考虑,以致特定情况下的评价结果不能很好地反映实际生态风险,因而有必要创建适用性更广的Hakanson潜在生态风险指数法。为此,基于全过程控制优化的思想,引入了生物可利用性毒性系数,并将修正浓度与参考值差值引入计算公式,创建了基于生物可利用性与宽浓度范围的Hakanson潜在生态风险指数法,实现了对重金属不同形态风险贡献的差异及重金属浓度低于参考值情况下潜在生态风险的准确把握。以小秦岭金矿区为典型区域,辅以对采集土样重金属总量及5种形态含量的分析,开展案例研究。结果表明,基于生物可利用性与宽浓度范围的Hakanson潜在生态风险指数法能客观地揭示土壤重金属的潜在生态风险,具有更大的适应性,是一种有效的潜在生态风险评价方法。     

地质灾害危险性评估及其半定量分析法在罗家寨气田内部集输工程中的应用

罗家寨气田内部集输工程地质灾害危险性评估项目属于一级评估项目，我们在该项目中运用了GPS、遥感数字化正射影像地图等新技术、新方法，同时采用了灾损率（Zs）法、风险区划法半定量的综合评估方法，通过系统的整理第一手资料和综合分析，对本地区地质灾害危险性进行现状评估、预测评估和综合评估，评价工程建设用地适宜性并提出地质灾害的防治措施建议。     

重庆嘉陵江干流饮用水水源地水质分析与健康风险评价

利用WQI模型和水环境健康风险评价模型对20092011年嘉陵江干流重庆段6个饮用水水源地进行评价,并将影响这两种方法的主要因素进行分析比较。结果表明,6个水源地水质总体较好且城郊差异不大,但健康风险等级普遍偏高,城区明显高于郊区;各污染物都可能影响到WQI值,而砷、镉尤其是六价铬等化学致癌物是影响总健康危害风险的主要因素。两种模型侧重点不同,综合运用将更有助于客观全面评价水体质量和对人体健康的影响。     

Mineralogy and geochemistry of the Texeo Cu–Co mine site (NW Spain): screening tools for environmental assessment

The Cu–Co–Ni Texeo mine has been the most important source of Cu in NW Spain since Roman times and now, approximately 40,000 m³ of wastes from mine and metallurgical operations, containing average concentrations of 9,263 mg kg⁻¹ Cu, 1,100 mg kg⁻¹ As, 549 mg kg⁻¹ Co, and 840 mg kg⁻¹ Ni, remain on-site. Since the cessation of the activity, the abandoned works, facilities and waste piles have been posing a threat to the environment, derived from the release of toxic elements. In order to assess the potential environmental pollution caused by the mining operations, a sequential sampling strategy was undertaken in wastes, soil, surface and groundwater, and sediments. First, screening field tools were used to identify hotspots, before defining formal sampling strategies; so, in the areas where anomalies were detected in a first sampling stage, a second detailed sampling campaign was undertaken. Metal concentrations in the soils are highly above the local background, reaching up to 9,921 mg kg⁻¹ Cu, 1,373 mg kg⁻¹ As, 685 mg kg⁻¹ Co, and 1,040 mg kg⁻¹ Ni, among others. Copper concentrations downstream of the mine works reach values up to 1,869 μg l⁻¹ and 240 mg kg⁻¹ in surface water and stream sediments, respectively. Computer-based risk assessment for the site gives a carcinogenic risk associated with the presence of As in surface waters and soils, and a health risk for long exposures; so, trigger levels of these elements are high enough to warrant further investigation.     

Reliability of shallow foundations designed against bearing failure using LRFD

Worldwide, there is growing interest in the development of a rational reliability-based geotechnical design code. The reasons for this interest are at least two-fold; first, geotechnical engineers face significantly more uncertainties than those faced in other fields of engineering, therefore there is a need to properly characterize and deal with these uncertainties. Second, for decades, structural engineers have used a reliability-based design code, and there is a need to develop the same for geotechnical engineers, in order that the two groups can ‘speak the same language’. This paper develops a theoretical model to predict the probability that a shallow foundation will exceed its supporting soil's bearing capacity. The footing is designed using characteristic soil properties (cohesion and friction angle) derived from a single sample, or ‘core’, taken in the vicinity of the footing, and used in a load and resistance factor design approach. The theory predicting failure probability is validated using a two-dimensional random finite element method analysis of a strip footing. Agreement between theory and simulation is found to be very good. Therefore, the theory can be used with confidence to perform risk assessments of foundation designs and develop resistance factors for use in code provisions.     

Process of Housing Damage Assessment: The 1995 Hanshin-Awaji Earthquake Disaster Case

Rebuilding of victims' livelihoods was a crucial issue in the restoration process in the1995 Hanshin-Awaji Earthquake Disaster. Housing damage assessment influencedmost of the rebuilding of the livelihood in the long term, because the Victim Certificatesissued by the local governments based on the results of the Housing damage assessmentwas required to receive most of the individual assistance measures. In the process ofHousing damage assessment, many complex problems arose, leading to extensivework on the part of the disaster responders. Consequently, a considerable number ofvictims were dissatisfied with the assessment and applied for a resurvey. Due to a floodof requests for resurvey, disaster responders had to work on damage assessment, leavingrelief activities aside.In order to facilitate Housing damage assessment, this paper discusses thefollowing five points: (1) the processes and the problems of assessments performedin the Hanshin-Awaji Earthquake Disaster, (2) the changes in the nature of informationneeded by the victims, (3) the improvements over the present damage assessment, (4)the housing situation in Japan, and (5) the international situation on damage assessment.It is obvious from the results that a poor damage assessment system and the size ofthe disaster produced a very large work load. Differences in appreciation among theinvestigators also contributed to unfair assessments and led to the victims beingincreasingly dissatisfied by the survey results. Finally, a design concept for acomprehensive damage assessment system, which has been derived from theabove five points, is proposed for post-disaster management.     

水口山矿田矿床定位模式及找矿远景区评价

文章从水口山矿田所处大地构造背景及矿田构造岩浆作用分析入手,阐明了矿田内两大成岩成矿系列:Ⅰ与燕山中期中酸性侵入类有关的中温热液接触交代(夕卡岩)型铅锌铜银硫矿床,Ⅱ与燕山晚期英安质次火山-火山岩有关的浅成低温热液铅锌金银矿床.讨论了两者间的时空关系,分析了控矿因素,总结了矿床定位模式,并结合地物化遥资料进行了矿田内找矿远景区的评价.