Kinematics of throughgoing fractures in jointed rocks

Throughgoing fractures play a major role in subsurface fluid flow yet the kinematics of their formation, which directly impact rock flow properties, are often difficult to establish. We investigate throughgoing fractures in the Monterey Formation of California that developed by the coalescence of pre-existing joints. At Lompoc Landing, throughgoing fractures fall into three main groups: linked, linked with aperture, and breccia zones. The segmented nature of their walls provides numerous piercing points to firmly establish the sense of displacement. Analysis of displacement vectors derived from piercing points demonstrates that the NW–SE trending throughgoing fractures, often interpreted as strike–slip faults, are in fact extensional structures in origin. We suggest that this method may be applied to throughgoing fractures that form by the same mechanism in other geologic settings. Establishing kinematics of throughgoing fractures will lead to a better understanding of their contribution to subsurface fluid flow.     

西藏聂拉木高喜马拉雅结晶岩系的伸展变形

西藏聂拉木高喜马拉雅结晶岩系在区域上以单一的叶理和单一的拉伸线理占主要地位，其变形带的组构主要反映了透入性的伸展变形；根据显微构造分析表明早期由北往南推覆，晚期由南向北伸展，且晚期表现非常明显。     

Rare earth and other trace element mobility during mylonitization: a comparison of the Brevard and Hope Valley shear zones in the Appalachian Mountains, USA

In progressing from a granitoid mylonite to an ultramylonite in the Brevard shear zone in North Carolina, Ca and LOI (H₂O) increase, Si, Mg, K, Na, Ba, Sr, Ta, Cs and Th decrease, while changes in Al, Ti, Fe, P, Sc, Rb, REE, Hf, Cr and U are relatively small. A volume loss of 44% is calculated for the Brevard ultramylonite relative to an Al–Ti–Fe isocon. The increase in Ca and LOI is related to a large increase in retrograde epidote and muscovite in the ultramylonite, the decreases in K, Na, Si, Ba and Sr reflect the destruction of feldspars, and the decrease in Mg is related to the destruction of biotite during mylonitization. In an amphibolite facies fault zone separating grey and pink granitic gneisses in the Hope Valley shear zone in New England, compositional similarity suggests the ultramylonite is composed chiefly of the pink gneisses. Utilizing an Al–Ti–Fe isocon for the pink gneisses, Sc, Cr, Hf, Ta, U, Th and M-HREE are relatively unchanged, Si, LOI, K, Mg, Rb, Cs and Ba are enriched, and Ca, Na, P, Sr and LREE are lost during deformation. In contrast to the Brevard mylonite, the Hope Valley mylonite appears to have increased in volume by about 70%, chiefly in response to an introduction of quartz. Chondrite-normalized REE patterns of granitoids from both shear zones are LREE-enriched and have prominent negative Eu anomalies. Although REE increase in abundance in the Brevard ultramylonites (reflecting the volume loss), the shape of the REE pattern remains unchanged. In contrast, REE and especially LREE decrease in abundance with increasing deformation of the Hope Valley gneisses. Mass balance calculations indicate that ≥95% of the REE in the Brevard rocks reside in titanite. In contrast, in the Hope Valley rocks only 15–40% of the REE can be accounted for collectively by titanite, apatite and zircon. Possible sites for the remaining REE are allanite, fluorite or grain boundaries. Loss of LREE from the pink gneisses during deformation may have resulted from decreases in allanite and perhaps apatite or by leaching ofy REE from grain boundaries by fluids moving through the shear zone. Among the element ratios most resistant to change during mylonitization in the Brevard shear zone are La/Yb, Eu/Eu*, Sm/Nd, La/Sc, Th/Sc, Th/Yb, Cr/Th, Th/U and Hf/Ta, whereas the most stable ratios in the Hope Valley shear zone are K/Rb, Rb/Cs, Th/U, Eu/Eu*, Th/Sc, Th/Yb, Sm/Nd, Th/Ta, Hf/Ta and Hf/Yb. However, until more trace element data are available from other shear zones, these ratios should not be used alone to identify protoliths of deformed rocks.     

三江源地区水资源的涵养和保护

分析了三江源区水资源现状,论述了建立水资源三级保护区的意义、作用和划分方案,实施林草植被的保护和恢复的水文生态效益及健全水资源补偿机制的必要性。     

CHARACTERIZATION OF DEFORMATION AND X-RAY PETROFABRICS IN THE MIDDLE PART OF THE WAHONGSHAN FAULT ZONE, QINGHAI PROVINCE, NORTHWESTERN CHINA

The Wahongshan fault zone in Qinghai province is one of the most important faults in westem China. In this paper, deformation and X-ray petrofabrics have been studied in the middle segment of the fault. The results show that the formation of the fault zones can be divided into two major stages: ductile shear deformation stage and brittle deformation stage. The early stage ductile shearing leads to the formation of the NW-NNW trending mylonite zones along the fault, which is intensely cut by the late-formed brittle faults. X-ray petrofabrics of rocks near the faults indicate that the minerals in the tectonites show a great degree of orientation in the alignment. The quartz, which is a very important mineral in the tectonites, is deformed by basal face gliding or near basal face gliding, and sometimes by prismatic face sliding, which indicates that the rocks are deformed in epithermal to mesothermal or mesothermal environment, and the dynamic recrystallization also plays an important role in the formation     

Centrifuge modelling of the influence of crustal fabrics on the development of transfer zones: insights into the mechanics of continental rifting architecture

Centrifuge analogue experiments are used to model the reactivation of pre-existing crustal fabrics during extension. The models reproduced a weakness zone in the lower crust whose geometry was varied in order to investigate its role in controlling the architecture of rift segments and related transfer zones. The typical rift system geometry was characterised by two offset rift segments connected by a major transfer zone in which boundary faults were oblique to the extension vector and displayed a significant transcurrent component of movement. The transfer zone was also characterised by cross-basin faults with both trend and strike-slip component of movement opposite to that displayed by the master faults. Typically, different structural patterns were obtained by changing the offset angle φ between the rift segments, supporting that the structural pattern at transfer zones is strongly influenced by the orientation of pre-existing discontinuities with respect to the stretching vector. In the models, the aspect ratio (ratio of length vs. width) of the transfer zone shows a positive correlation with the offset angle (i.e., the more the inherited fabric is parallel to the extension direction, the longer and narrower the transfer zones). In case of staircase offset of the rift segments (φ=90°), the structural pattern was characterised by two isolated rift depressions linked by a narrow transfer zone in which border faults with alternating polarity overlapped. Prominent rise of the ductile lower crust was also observed at the transfer zone. Many of these geometrical features display striking similarities with natural rift systems. The results of the current experiments provide useful insights into the mechanics of continental rift architecture, supporting that rift propagation, width and along-axis segmentation may be strongly controlled by the reactivation of pre-existing pervasive crustal fabrics.     

Are isolated stable rigid clasts in shear zones equivalent to voids?

Particles in shear enclose important information about a rock's past and can potentially be used to decipher the kinematic history and mechanical behavior of a certain outcrop or region. Isolated rigid clasts in shear zones often exhibit systematic inclinations with respect to the shear-plane at small angles, tending towards the instantaneous stretching direction of the shear zone. This shape preferred orientation cannot be easily explained by any of the analytical theories used in geology. It was recently recognized that a weak mantle surrounding the clast or a slipping clast–matrix interface might be responsible for the development of the observed inclinations. Physical considerations lead us to conjecture that such mantled, rigid clasts can be effectively treated as voids that are not allowed to change their shape. The resulting equivalent void conjecture agrees well with numerical and field data and has the following important geological implications. (i) Clasts in shear zones can have stable positions in simple shear without the requirement of an additional pure shear component. (ii) The stable orientation can be approached either syn- or antithetically; hence, the clast can rotate against the applied shear sense. (iii) The strain needed to develop a strong shape preferred orientation is small (γ≈1) and therefore evaluations based on other theories may overestimate strain by orders of magnitude. (iv) The reconstruction of far-field shear flow conditions and kinematic vorticity analysis must be modified to incorporate these new findings.     

Structural controls on gold mineralisation and the nature of related fluids of the Paiol gold deposit, Almas Greenstone Belt, Brazil

Chemical analyses suggest that the metavolcanic rocks of the Almas Greenstone Belt (AGB), Tocantins State, Brazil have a continental affinity, possibly related to a continental rift environment. They were metamorphosed to amphibolite facies during a regional tectono-metamorphic event (D_n), retrogressed to greenschist facies assemblages and then hydrothermally altered within dextral strike–slip shear zones (D_n+1). Fracture sets related to D_n+2 intersect S_n+1.The Paiol Gold Mine is one of several mineralised zones within metabasic and meta-intermediate rocks of the AGB. It exploits shoots of sulphide–Au–quartz mineralisation that occupy dilational zones approximately perpendicular to an elongation lineation (L_n+1) within mylonitic foliation S_n+1 (S_n+1=S within the S–C fabric). The dilational zones probably formed due to dextral displacement on sinistrally en echelon C surfaces. Minor amounts of gold may have been introduced or remobilised during D_n+2.Coexisting primary and pseudosecondary fluid inclusions in mineralised quartz veins from ore shoots comprise a high-salinity three-phase type (Type II) and a lower salinity two-phase type (Type I). Homogenisation temperatures for Type II inclusions range from 200 to 410 °C and Type I from 90 to 320 °C. The inclusions and their temperature ranges are believed to reflect heat exchange and some mixing between the two fluid types under relatively constant ambient temperatures, but variable (though broadly declining) fluid temperatures. This took place late in D_n+1 in conjunction with greenschist facies retrogression and localised hydrothermally induced metasomatism.     

Deep seismic reflection profiling in the Archaean northeastern Yilgarn Craton, Western Australia: implications for crustal architecture and mineral potential

Deep seismic reflection data across the Archaean Eastern Goldfields Province, northeastern Yilgarn Craton, Western Australia, have provided information on its crustal architecture and on several of its highly mineralised belts. The seismic reflection data allow interpretation of several prominent crustal scale features, including an eastward thickening of the crust, subdivision of the crust into three broad layers, the presence of a prominent east dip to the majority of the reflections and the interpretation of three east-dipping crustal-penetrating shear zones. These east-dipping shear zones are major structures that subdivide the region into four terranes. Major orogenic gold deposits in the Eastern Goldfields Province are spatially associated with these major structures. The Laverton Tectonic Zone, for example, is a highly mineralised corridor that contains several world-class gold deposits plus many smaller deposits. Other non crustal-penetrating structures within the area do not appear to be as well endowed metallogenically as the Laverton structure. The seismic reflection data have also imaged a series of low-angle shear zones within and beneath the granite–greenstone terranes. Where the low-angle shear zones intersect the major crustal-penetrating structures, a wedge shaped geometry is formed. This geometry forms a suitable fluid focusing wedge in which upward to subhorizontal moving fluids are focused and then distributed into the nearby complexly deformed greenstones.