Accretion and exhumation at a Variscan active margin, recorded in the Saxothuringian flysch

The Saxothuringian flysch basin, on the north flank of the Central European Variscides, was fed and eventually overthrust by the northwestern, active margin of the Tepla-Barrandian terrane. Clast spectra, mineral composition and isotopic ages of detrital mica and zircon have been analyzed in order to constrain accretion and exhumation of rocks in the orogenic wedge. The earliest clastic sediments preserved are of early Famennian age (ca. 370?Ma). They are exposed immediately to the NW of the suture, and belong to the par-autochthon of the foreland. Besides ultramafic (?ophiolite) material, these rocks contain clasts derived from Early Paleozoic continental slope sediments, originally deposited at the NW margin of the Saxothuringian basin. These findings, together with the paleogeographic position of the Famennian clastics debris on the northwestern passive margin, indicate that the Saxothuringian narrow ocean had been closed by that time. Microprobe analyses of detrital hornblendes suggest derivation from the “Randamphibolit” unit, now present in the middle part of the Saxothuringian allochthon (Münchberg nappes). Detrital zircons of metamorphic rocks formed a little earlier (ca. 380?Ma) indicate rapid recycling at the tectonic front. The middle part of the flysch sequence (ca. early to middle Viséan), both in the par-autochthon and in the allochthon, contains abundant clasts of Paleozoic rocks derived from the northwestern slope and rise, together with debris of Cadomian basement, 500-Ma granitoids and 380?Ma (early Variscan) crystalline rocks. All of these source rocks were still available in the youngest part of the flysch (c. middle to late Viséan), but some clasts record, in addition, accretion of the northwestern shelf. Our findings permit deduction of minimum rates of tectonic shortening well in excess of 10–30?mm per year, and rates of exhumation of ca. 3?mm/a, and possibly more.     

Crustal structure of Dabieshan orogenic belt

The crustal structures ofP velocity and density on the deep seismic sounding profile across the Ilabieshan orogenic belt are presented. There is a 5-km-thick crustal “root” between the Yuexi and Xiaotian where the elevation is highest on the profile. An apparent Moho offset of 4. 5 km beneath the Xiaotian-Mozitan fault marks the paleo-suture of the Triassic collision. A high-velocity anomaly zone at the depth below 3 km beneath the ultra-high pressure (UHP) zone may be correlated to the higher content of UHP metamorphic rocks. Project supported by the National Natural Science Foundation of China and the Joint Earthquake Science Foundation.     

造山带岩浆活动与构造运动关系研究综述

熔体及其活动在造山带的演化中发挥了重要作用。熔体活动发迹了地壳应力作用方式而诱发形成剪切带或断层；熔体活动调整块体间的位移而影响造山带的变形；     

秦岭造山带南北向构造及有关问题的讨论

秦岭造山带具有复杂和长期演化的历史，本文对秦岭造山带的主造山期，结构特征（包括构造单元划分），构造体制和发展演化等进行了综合和讨论。     

滇西北金沙江带蛇绿岩,蛇绿混杂岩形成环境及时代

本文对滇西北金沙江带蛇绿岩及其混杂岩的产状、规模，岩石学及岩石化学特征等进行系统的综合研究，并根据大量的化石资料，将该区蛇绿岩的形成时代厘定为晚石炭世至二叠纪，蛇绿要岩的形成时代厘定为早、中三叠世，论证了本区蛇绿岩产于规模较小的洋盆环境之中，由于金沙江洋盆发育阶段较短暂，不具有隔离冈瓦纳及扬子两大古生物地理区系的作用，因此，金沙江缝合带不能构成古特提斯域的主缝合带。     

闽西北常口—南舟断裂带与萤石成矿关系

福建省区域地质调查队三分队在元坑幅及埔上幅１：５万区调中分别发现了将乐常口大型萤石矿和顺昌南舟萤石矿。两个矿床均位于常口－南舟北东向断裂带中，受其次级张性断裂直接控制，矿床成因类似。     

矿产开发与环境保护

通过国内多个矿区实例，较系统地叙述了矿产资源开发导致的生态环境破坏和污染状况。表明矿产开发中对环境污染的途径包括河流、土壤、等。最后简要介绍了国内、国外几种对采矿污染比较有效的防治措施。     

试论层序地层学在1∶5万区调工作中的应用—以浑江地区为例

通过在吉南浑江地区开展的白山市等三幅１∶５万区调工作，尝试性地运用层序地层学的理论，初步总结了不同特征的不整合面（层序界面）及凝缩段的识别标志；分析了地层序列中矿产分布特征；探讨了层序分析中以剖面岩石（岩性、组构）、相转换界面的基础研究方法。进而将浑江地区新元古代—早古生代地层划分为三个Ⅱ级沉积序列（超层序）、七个Ⅲ级沉积序列（层序）。     

安徽淮河构造变形带及邻近块体现代构造应力场特征

针对安徽省较特殊的构造环境及历史地震分布特点，利用直达波最大振幅比和系统聚类分析方法，在对安徽淮河中游区1974年以来近百个中小地震震源机制反演、聚类及空间合成的基础上，分析了华北断块南缘的安徽淮河构造变形带及邻近块体震源断层滑动方式、构造应力场分布及块体运动方式、应力场随时间变化等。结果显示：淮河构造变形带及其邻近块体上震源断层总体上以近走滑型或斜滑型破裂为主，但倾滑型破裂也占一定比例；该地区构造应力以水平作用为主，但也存在一定的垂向作用。其中淮北和皖中块体仍可能分别向SWW和NEE方向运动，并在淮河构造变形带上产生左旋剪切作用，呈现一定的继承性活动特征；各块(带)上主压应力P轴走向随时间的变化在总体上较为一致，而各时段之间P轴方位存在一定差异，显示安徽淮河中游区受华北和华南应力场的共同作用，但其地震活动可能主要受控于华北应力场。     

甘肃东海金矿床地球化学特征

东海金矿床位于甘肃北山重要的Au，Ag多金属成矿带上，具长期活动特征的花牛山-察客尔呼都格压扭性断裂横贯成矿带，成矿的有利位置为大断裂及次一级断层、层间裂隙(破碎蚀变带，局部夹有石英脉)，断裂控矿特征十分明显。原生晕以亲硫元素组合为主，亦有亲氧元素。金矿石以硫化物型为主，氧化物型次之，其元素组合以成矿元素Au，Ag，Pb，Zn和亲硫元素Cu，Sb，Mo为主，也有亲氧元素W，Sn。具有深部断裂剪切、挤压带地球化学元素组合特征。