广西加里东运动构造古地理问题

广西历来被认为是我国加里东运动的典型地区,志留纪末的造山运动使早泥盆世莲花山组砾岩不整合于下伏地层之上。但是,实际上莲花山组只分布于广西中部的大明山－大瑶山地区和东北部扬子地块边缘,并且,它不具备同造山期磨拉石沉积特征,而是古陆剥蚀面上新海侵序列底部的滨海相沉积。广西西部的晚古生代台地相区,泥盆系底部为泥岩或粉砂岩,超覆于寒武系台地相沉积层之上。滇东南和越南北部邻区情况类似。推测在早古生代时它们属于一个地块,可称为“桂滇－北越地块”。早奥陶世云开地块和桂滇－北越地块、扬子地块的会聚和挤压,形成了大明山－大瑶山地体寒武系东西向的线形褶皱带。这是广西加里东运动的主幕。晚奥陶世-早志留世华夏地块和扬子地块的碰撞带在广西仅限于它的东北部,表现为震旦系-下志留统近南北向的线形褶皱带。志留纪末并无造山运动的证据。早泥盆世开始,可能由于地幔柱活动而使桂滇－北越地块裂解,形成北越地块、靖西台地和其他更小的块体。     

BIM技术在震后灾区居民装配式建筑设计中的应用

为解决震后灾区地形复杂,建筑建设困难问题,将BIM技术应用在震后灾区居民装配式建筑设计中,基于BIM体系框架设计震后灾区居民装配式建筑建造流程,通过设计阶段、工厂预制阶段、运输阶段以及安装阶段完成震后灾区居民装配式建筑项目的构建,采用Revit软件和Tekla软件构建装配式建筑的建筑模型和结构模型,利用BIM技术的可视化、参数化以及高合作性优势,优化模型以及构件,再通过Navisworks软件依据建筑模型实现建筑工程的碰撞检测,减少施工过程中的变更,降低建筑工程施工成本;通过基于BIM的震后建筑进度管理模型,实现建筑进化计划编制以及进度控制;利用Lumion软件输入工程材质实现建筑项目的实时漫游,直观了解装配式建筑效果。     

深部天然核反应堆——一种可能的山脉隆升动力源

板块碰撞造山模式难以解释造山作用在时间上的“滞后”和在空间上的“差位”现象，大量研究表明山脉隆升的动力来自深部，因此，探索深部地质过程的物理和化学机制及其导致的能量再分配是认识山脉隆升动力学机制的关键，若干线索表明地幔中的核反应中可能在岩石圈动力学演化过程中起过不可忽视的作用，通过分析U，Th等元素的地球化学性质及其在深变质过程中的行为，认为伴随板块俯冲发生的陆壳物质向地幔的再循环有可能在办流圈顶部形成富含U，Th,K等放射性亲石元素和碳质（石墨）的地质体，通过理论上的论证和对Oklo天然核反应堆遗迹的反演表明这些地质体可能有一部分具备了形成石墨核反应堆的条件。这种反应堆在亚临界状态下的断续运行有可能为其上方岩石圈中的岩浆作用提供热源，进入超临界状态时将可能导致深部核爆炸，成为地震，火山爆发和岩石圈破裂的动力来源，据此建立的山脉隆升的动力学初步模式，可以解释造山带的形成，高原的隆升，深源地震及其前兆的成因和金刚石及其相关岩石地壳浅部置位的机制。     

新疆卡拉麦里地区晚古生代以来不同构造层特征及大地构造意义

摘要：卡拉麦里地区石炭纪以来的岩石地层系统由三大套构造岩石地层单位构成, 分别是以劈理、紧闭褶皱极为发育的卡拉麦里蛇绿混杂岩带为代表的造山带基底层系,以开阔褶皱为主要构造变形的石炭纪后碰撞构造层,和高角度正断层及平缓褶皱较发育的二叠-侏罗纪陆内湖盆构造层。它们分别记录了卡拉麦里地区前石炭纪碰撞造山阶段、石炭纪后碰撞阶段和二叠纪后板内断陷 坳陷阶段的沉积 变形特征。     

鄂尔多斯地块构造演化的古地磁学研究

鄂尔多斯地块与中朝地台其它地区相同时代地层的古地磁结果基本一致表明:晚二叠世以来,中朝地台经历了从低纬度(19°左右)向中纬度的北移过程,并伴有50°左右的逆时针旋转;晚二叠世—中三叠世地台北移10°(1000km)左右,而方位基本未变;中三叠世—中侏罗世主要发生50°左右的逆时针旋转,而北向位移不明显,这一旋转可能与杨子地台和中朝地台碰撞拼合有关,或者说是印支运动在该地区的反应,中侏罗世—早白垩世地块已基本和现代位置一致     

Chromium in minerals as tracer of the polycyclic evolution of eclogite and related metabasite from the Pohorje Mountains,Slovenian Eastern Alps

Significantly different peak pressure–temperature (P–T) conditions (18–26 kbar and 630–760°C versus 29–37 kbar and 750–940°C) have previously been published for eclogite and related metabasites from the south-eastern flank of the Pohorje Mountains in Slovenia. These rocks can show a bimodal distribution of chromium in the rock-forming minerals, particularly garnet, the role of which in their metamorphic evolution is unclear. Therefore, we studied an eclogite and a related rock with clinopyroxene containing only 17 mol% jadeite + acmite (sample 18Ca35a). KαCr intensity maps of garnet particularly in sample 18Ca35a show a sharp irregular boundary between the core (Gt1) and the mantle (Gt2). Gt1 of millimetre-sized garnet in this rock is nearly Cr-free and unzoned, whereas Gt2 is of different composition (0.22 wt.% Cr₂O₃) and slightly zoned. Nearly Cr-free amphibole, (clino)zoisite, kyanite and staurolite inclusions are present in Gt1. The matrix consists of garnet and Cr-bearing clinopyroxene, (clino)zoisite and amphibole. Thermodynamic modelling suggests peak P–T conditions of 22.5 ± 2 kbar at 710 ± 25°C (Gt1) and 23 ± 2 kbar at 700 ± 25°C (Gt2) in both samples. We interpret these findings to suggest that olivine- and hornblende-bearing gabbros with some chromite experienced early metamorphism in the eclogite facies, when Gt1 formed. The rock was subsequently exhumed and cooled leading to significant garnet corrosion. A second stage of metamorphism, recognized by mappable Cr contents in garnet, led to the growth of Gt2 and other Cr-bearing minerals at the expense of chromite relics, which survived stage I. The peak P–T conditions of stage II are compatible with those previously derived by same authors and support the view that probably no ultrahigh-pressure eclogite exists in the Pohorje Mountains. We relate the two metamorphic events to the Cretaceous and Palaeogene high-pressure events recently reported from micaschists of the Pohorje Mountains.     

Influence of the precollisional stage on subduction dynamics and the buried crust thermal state: Insights from numerical simulations

At continental subduction initiation, the continental crust buoyancy may induce, first, a convergence slowdown, and second, a compressive stress increase that could lead to the forearc lithosphere rupture. Both processes could influence the slab surface P–T conditions, favoring on one side crust partial melting or on the opposite the formation of ultra-high pressure/low temperature (UHP-LT) mineral. We quantify these two effects by performing numerical simulations of subduction. Water transfers are computed as a function of slab dehydration/overlying mantle hydration reactions, and a strength decrease is imposed for hydrated mantle rocks. The model starts with an old oceanic plate ( 100 Ma) subducting for 145.5 Myr with a 5 cm/yr convergence rate. The arc lithosphere is thermally thinned between 100 km and 310 km away from the trench, due to small-scale convection occuring in the water-saturated mantle wedge. We test the influence of convergence slowdown by carrying on subduction with a decreased convergence rate (≤ 2 cm/yr). Surprisingly, the subduction slowdown yields not only a strong slab warming at great depth (> 80 km), but also a significant cooling of the forearc lithosphere at shallower depth. The convergence slowdown increases the subducted crust temperature at 90 km depth to 705 ± 62 °C, depending on the convergence rate reduction, and might thus favor the oceanic crust partial melting in presence of water. For subduction velocities ≤ 1 cm/yr, slab breakoff is triggered 20–32 Myr after slowdown onset, due to a drastic slab thermal weakening in the vicinity of the interplate plane base. At last, the rupture of the weakened forearc is simulated by imposing in the thinnest part of the overlying lithosphere a dipping weakness plane. For convergence with rates ≥ 1 cm/yr, the thinned forearc first shortens, then starts subducting along the slab surface. The forearc lithosphere subduction stops the slab surface warming by hot asthenosphere corner flow, and decreases in a first stage the slab surface temperature to 630 ± 20 °C at 80 km depth, in agreement with P–T range inferred from natural records of UHP-LT metamorphism. The subducted crust temperature is further reduced to 405 ± 10 °C for the crust directly buried below the subducting forearc. Such a cold thermal state at great depth has never been sampled in collision zones, suggesting that forearc subduction might not be always required to explain UHP-LT metamorphsim.     

U-Pb Zircon and Re-Os Molybdenite Geochronology of theW-Mo Mineralized Region of South Qinling,China, andtheir Tectonic Implications

A W-Mo mineralized region is located along the northern margin of the South Qinling tectonic belt of China. WMo mineralization occurs mainly in Cambrian–Ordovician clastic and carbonate rocks, and the ore bodies are structurally controlled by NW–SE-and NNE–SSW-striking faults. Evidence for magmatism in the area is widespread and is dominated by intermediate–felsic intrusives or apophyses, such as the Dongjiangkou, Yanzhiba, Lanbandeng, and Sihaiping granitic bodies. Quartz-vein-type mineralization and fault-controlled skarn-type mineralization dominate the ore systems, with additional enrichment in residual deposits. At present, there are few or insufficient studies on(1) the age of mineralization,(2) the relationship between intermediate–felsic granite and W-Mo mineralization,(3) the source of ore-forming materials,and(4) the metallogenic and tectonic setting of the mineralized area. In this paper, we present geochronology results for numerous intrusive granitic bodies in the South Qinling tectonic belt. U-Pb zircon geochronology of the Lanbandeng monzogranite and Wangjiaping biotite monzogranite yields ages of 222.7 ± 2.3 and 201.9 ± 1.8 Ma, respectively. In contrast to the Late Triassic age of the Lanbandeng monzogranite, the age of the newly discovered Wangjiaping biotite monzogranite places it at the Triassic–Jurassic boundary. Re-Os molybdenite geochronology on the Qipangou W-Mo deposit yielded a model age of 199.7 ± 3.9 Ma, indicating the deposit formed in the early Yanshanian period of the Early Jurassic. Granitoid intrusions in the mineralized area are characterized by composite granite bodies that crystallized at ca.240–190 Ma. While there were multiple stages of intrusion, most occurred at 210–220 Ma, with waning magmatic activity at 200–190 Ma. The Re-Os age of molybdenite in the region is ca. 200–190 Ma, which may represent a newly discovered period of W-Mo metallogenesis that occurred during the final stages of magmatism. The heat associated with this magmatism drove ore formation and might have provided additional ore-forming components for metallogenesis(represented by the Wangjiaping biotite monzogranite). Ore materials in the mineralized area were derived from mixed crustal and mantle sources. Enrichment of the region occurred during intracontinental orogenesis in the late Indosinian–Yanshanian, subsequent to the main Indosinian collision. At this time, the tectonic environment was dominated by extension and strike-slip motion.     

青藏高原南部晚新生代板内造山与动力成矿

青藏高原晚新生代构造隆升是板块碰撞成因还是板内造山过程 ,关系到高原形成机制、演化过程以及岩石圈动力学与大陆动力学的关系等一系列重大科学问题。近年来在冈底斯发现多个以斑岩铜矿为主的大型和超大型矿床 ,其成矿时代为 2 0～ 12Ma ,与青藏高原构造隆升时代一致 ,也与笔者10年前以大陆动力学和成矿动力学为理论指导的预测结果吻合。青藏高原南部晚新生代大量的地质、地球物理、矿床等方面的证据根本不支持碰撞造山理论 ,如青藏高原内部伸展边缘逆冲、碰撞与隆升之间时差明显 ,壳内低速层和低阻层发育 ,造山与成盆关系密切 ,板内隆升环境下发生大规模构造变形、岩浆活动和动力成矿等。青藏高原南部晚新生代构造隆升作用是在新特提斯开合转换、碰撞造陆之后 ,在下地壳层流作用的驱动下 ,发生板内造山、地壳增厚、热隆伸展和改造成矿的构造成矿过程 ,大规模的板内金属成矿在 3～ 4Ma以来的均衡隆升、成山过程中进一步改造。