The first impoundment of the Three Gorges Dam reservoir in China started from a water surface elevation of 95 m on June 1,
2003 and reached 135 m on June 15, 2003. Shortly after the water level reached 135 m, many slopes began to deform and some
landslides occurred. The Qianjiangping landslide is the largest one; it occurred on the early morning of July 14, 2003 and
caused great loss of lives and property. Field investigation revealed that, although failure occurred after the reservoir
reached 135 m, the stability of the slope was already reduced by preexisting sheared bedding planes. To study the mechanism
of the rapid motion of this reactivated landslide, two soil samples were taken from a yellow clay layer and a black silt layer
in the sliding zone, respectively, and a series of ring shear tests were conducted on the samples. One series of ring shear
tests simulates the creep deformation behavior, while the other series simulates different shear rates. Conclusions drawn
from analysis of the ring shear tests indicate that the mechanism of the rapid motion of the reactivated landslide was caused
by the rate effect of the black silt layer during the motion phase after the creep failure. The yellow clay layer did not
play any important role in the rapid motion in the 2003 event. 相似文献
The arctic islands of the Lofoten-Vesterålen archipelago in northern Norway have a wide distribution of weathered land surfaces commonly located above 250 m with several apparent similarities. In order to investigate the characteristics of (deep) weathering in this region, northern Langøya and Hadseløya were chosen for in-depth analyses. Eight weathering profiles were excavated from various surfaces, and the stratigraphies were logged in detail. Material was collected throughout the weathering horizons, and all samples were subsequently analysed for clay mineralogy (< 63 μm fraction) and grain size distribution. The sampling strategy was complemented by samples from additional saprolites and other landforms such as moraines and rock glaciers. The XRD results indicate that the presence of secondary minerals, such as gibbsite (Al(OH)3) and kaolinite (Al2Si2O5(OH)4), are very common throughout the profiles. Gibbsite is an extreme end product of silicate weathering and usually associated with a warmer and more humid climate, as found in Scandinavia during the Tertiary. The grain size analyses (< 63 μm) show that the finer silt fractions (< 8 μm) tend to be high in the profiles (20–40%), with significant amounts of clay (5–15%) demonstrating that the regolith itself is susceptible to frost sorting mechanisms.10Be exposure dates from in situ quartz knobs on tors and boulders of local origin suggest > 40,000 years of subaerial conditions. Considering the steady surface erosion, this figure should be viewed as an absolute minimum age estimate. Mapping of the superficial sediments and geomorphological features of the study areas has revealed several common morphological features, which indicate dominance of glacial and periglacial processes in the areas lying below the lower boundary of blockfields (c. 250 m). The weathering mantles are not a periglacial end product, but rather a relict tertiary landform that were modulated by permafrost processes as well as biological processes at later stages. The regolith cover constrain the vertical extension of warm-based Quaternary ice sheets challenging the notion of a parabolic ice mass consuming every mountain top of Lofoten and Vesterålen. 相似文献
Typical pull-apart structures were created in scaled clay experiments with a pure strike-slip geometry (Riedel type experiments). A clay slab represents the sedimentary cover above a strike-slip fault in the rigid basement. At an early stage of the development of the deformation zone, synthetic shear fractures (Riedel shears) within the clay slab display dilatational behaviour. With increasing basal displacement the Riedel shears rotate and open further, developing into long, narrow and deep troughs. The shear displacement and the low angle with the prescribed principal basal fault set them apart from tension gashes. At a more evolved stage, synthetic segments (Y-shears) parallel to the basal principal fault develop and accommodate progressive strike-slip deformation. The Y-shears connect the tips of adjacent troughs developed from the earlier Riedel shears, resulting in the typical rhomb-shaped structures characteristic for pull-apart basins. The Strait of Sicily rift zone, with major strike-slip systems being active from the Miocene to the Present, comprises pull-apart basins at different length scales, for which the structural record suggests development by a mechanism similar to that observed in our experiments. 相似文献
Several unfavorable environmental and engineering geologic conditions exist in Fargo, North Dakota. Dominantly, the behavior
of smectitic clays within the proglacial Lake Agassiz sediments of the Sherack and Brenna Formations creates subsoil instability
beneath engineered structures in the Fargo area and slope instability within cutbank meanders of the Red River of the North.
Unfavorable engineering geologic conditions encountered include: the elastic deformation of clayey glaciolacustrine soils,
shrink-swell properties, inadequate bearing capacities, and mass movements. These conditions are responsible for structural
failures including the Fargo Grain Elevator in 1955 and the Northern Pacific railroad grade. Bank failures along the Red River
are common due to the inherent instability of Brenna Formation smectitic clays which are subject to plastic deformation in
the subsurface, with resultant block failure of overlying Sherack Formation. Recent alluvial sediments due to typical fluvial
action and the continued seasonal saturation of cutbank meanders within the floodplain also add to soil instability. 相似文献
For normally consolidated clay, several researchers have developed a number of theoretical time factors to determine the coefficient of consolidation from piezocone test results. However, depending on assumptions and analytical techniques, it could vary considerably, even for a specific degree of consolidation. In this paper a method is proposed to determine a consistent coefficient of consolidation by applying the concept of an optimum design technique over all ranges of the degree of consolidation. Initial excess pore pressure distribution is assumed to be capable of being obtained by the successive spherical cavity expansion theory. The dissipation of pore pressure is simulated by means of a two-dimensional linear-uncoupled axi-symmetric consolidation analysis. The minimization of differences between measured and predicted excess pore pressure was carried out by the BFGS unconstrained optimum design algorithm with a one-dimensional golden section search technique. By analyzing numerical examples and in-situ test results, it was found that the adopted optimum design technique gives consistent and convergent results. 相似文献
The understanding of the thermo-hydro-mechanical behaviour of a clay barrier is needed for the prediction of its final in situ properties after the hydration and thermal transient in a radioactive waste repository.
As part of the CEC 1990–1994 R&D programme on radioactive waste management and storage, the CEA (Fr), CIEMAT (Sp), ENRESA (Sp), SCK · CEN (B), UPC (Sp) and UWCC (UK) have carried out a joint project on unsaturated clay behaviour (Volckaert et al., 1996). The aim of the study is to analyse and model the behaviour of a clay-based engineered barrier during its hydration phase under real repository conditions. The hydro-mechanical and thermo-hydraulic models developed in this project have been coupled to describe stress/strain behaviour, moisture migration and heat transfer. A thermo-hydraulic model has also been coupled to a geochemical code to describe the migration and formation of chemical species.
In this project, suction-controlled experiments have been performed on Boom clay (B), FoCa clay (Fr) and Almeria bentonite (Sp). The aim of these experiments is to test the validity of the interpretive model developed by Alonso and Gens (Alonso et al., 1990), and to build a database of unsaturated clay thermo-hydro-mechanical parameters. Such a database can then be used for validation exercises in which in situ experiments are simulated.
The Boom clay is a moderately swelling clay of Rupellian age. It is studied at the SCK · CEN in Belgium as a potential host rock for a radioactive waste repository. In this paper, suction-controlled experiments carried out on Boom clay by SCK · CEN are described. SCK · CEN has performed experiments to measure the relation between suction, water content and temperature and the relation between suction, stress and deformation. The applied suction-control techniques and experimental setups are detailed. The results of these experiments are discussed in the perspective of the model of Alonso and Gens. The influence of temperature on water uptake was rather small. The measured swelling-collapse behaviour can be explained by the Alonso and Gens model. 相似文献
Two Red Clay profiles near Xi’an and Xifeng were investigated in an attempt to determine magnetostratigraphic and palaeoclimatic
records. The results show that aeolian dust accumulation and the related East Asia palaeomonsoon system had begun by 6.5 Ma,
and it is deduced that the Tibetan Plateau had reached a significant elevation at that time. The late Tertiary palaeoclimatic
history of the Red Clay as reflected by magnetic susceptibility is reconstructed during the period of 6.5–2.5 Ma. Stepwise
increase in susceptibility of aeolian dust accumulation appears to have a close correlation to the uplift processes of the
Tibetan Plateau. The remarkable increase of aeolian dust accumulation at 3.2 Ma appears to be due to the influence of global
ice volume on the East Asia monsoon. Palaeomonsoon variation during the late Tertiary as recorded in the Red Clay sequences
from the Chinese Loess Plateau can be regarded as the product of a number of interacting factors, such as uplift of the Tibetan
Plateau, solar radiation, global ice volume, etc.
Project supported by the National Natural Science Foundation of China and the Foundation of Xi’an Laboratory of Loess and
Quaternary Geology, Chinese Academy of Sciences. 相似文献
The objective of this work is to assess the concentrations of three factions of air particles (settable particles, TSP and PM10) and the levels of several toxic elements in a clay atomisation industry through aerosol sampling at several points inside an industrial plant. Mechanical activities, which produce diffuse emissions, are the main process of discharge of particles in both indoor and outdoor workplace environments in the atomisation plant. The levels of As, Cd, Pb, Zn, Ba and Ni increase in the zones with higher concentrations of particles and lower ventilation. The concentrations of As and F are not influenced by the recycling processes. The levels of Cd and Pb do not show great enrichment in air particles collected inside the atomisation plant although the content of both elements is associated with ceramic muck recycling. Finally, the content of B in waste water is mainly transferred in gaseous phase to the atmosphere during the process of drying by atomisation. 相似文献