厚碳酸盐岩覆盖区RVSP三维地震勘探应用效果分析

该文以中国南方一厚碳酸盐岩覆盖区的RVSP三维地震勘探实例,对RVSP三维地震勘探观测系统和数据采集参数的确定、地面等效处理和波场分离等关键处理技术及地质效果进行了阐述和分析,说明了RVSP在克服表浅层复杂地质条件及环境条件对资料的影响及提高地震资料的分辨率有其特定的优势,同时也提出了RVSP三维地震在采集和处理过程中的难点。     

Variational analysis of dynamics of fissured poroelastic rocks

Rocks can be modeled in a continuum framework as fissured, poroelastic materials, i.e., materials with two degrees of porosity, one due to the fissures and another one due to the pores. The governing equations of motion of fissured poroelastic rocks established by Beskos are rederived here by establishing a variational statement which also provides the boundary conditions of the problem. This is accomplished by considering strain, dissipation and kinetic energies as well as the work of external forces. The above statement is also derived here by employing the method of weighted residuals.     

New P–T constraints on the Tamayen glaucophane‐bearing rocks,eastern Taiwan: Perple_X modelling results and geodynamic implications

New pseudosection modelling was applied to better constrain the P–T conditions and evolution of glaucophane‐bearing rocks in the Tamayen block of the Yuli belt, recognized as the world's youngest known blueschist complex. Based on the predominant clinoamphibole, textural relationships, and mineral compositions, these glaucophane‐bearing high‐P rocks can be divided into four types. We focused on the three containing garnet. The chief phase assemblages are (in decreasing mode): amphibole + quartz + epidote + garnet + chlorite + rutile/titanite (Type‐I), phengite + amphibole + quartz + garnet + chlorite + epidote + titanite + biotite + magnetite (Type‐II), and amphibole + quartz + albite + epidote + garnet + rutile + hematite + titanite (Type‐III). Amphibole exhibits compositional zoning from core to rim as follows: glaucophane → pargasitic amphibole → actinolite (Type‐I), barroisite → Mg‐katophorite/taramite → Fe‐glaucophane (Type‐II), glaucophane → winchite (Type‐III). Using petrographic data, mineral compositions and Perple_X modelling (pseudosections and superimposed isopleths), peak P–T conditions were determined as 13 ± 1 kbar and 550 ± 40 °C for Type‐I, 10.5 ± 0.5 kbar and 560 ± 30 °C for Type‐II (thermal peak) and 11 ± 1 kbar and 530 ± 30 °C for Type‐III. The calculations yield higher pressures and temperatures than previously thought; the difference is ~1–6 kbar and 50–200 °C. The three rock types record similar P–T retrograde paths with clockwise trajectories; all rocks followed trajectories with substantial pressure decrease under near‐isothermal conditions (Type‐I and Type‐III), with the probable exception of Type‐II where decompression followed colder geotherms. The P–T paths suggest a tectonic environment in which the rocks were exhumed from maximum depths of ~45 km within a subduction channel along a relative cold geothermal gradient of ~11–14 °C km^?1.     

Shape of pinch and swell structures as a viscosity indicator: Application to lower crustal polyphase rocks

Pinch and swell structures occur where a more competent layer in a weaker matrix is subjected to layer-parallel extension. In this contribution, we use numerical models to explore the use of pinch and swell structure shape symmetry and asymmetry as a determinant of relative viscosity between layers. Maximum asymmetry is attained when the matrix viscosity on one side is subtly weaker than the competent layer, while the other side is significantly weaker.Our numerical results are directly applied to asymmetrically developed pinch and swell structures in exposed lower continental crust. Here, shape geometries observed in a shear zone comprised of plagioclase-dominated, garnet-dominated and mixed amphibole-plagioclase-dominated bands, reveals that the plagioclase-dominated band is the most competent band and is marginally stronger (2×) and significantly stronger (10–40×) than the fine grained garnet-dominated and mixed amphibole-plagioclase-dominated band, respectively. Based on the experimentally determined viscosity of a plagioclase-dominated material and quantitative microstructural analysis, the viscosity range of the natural rock bands is 2.8 × 10¹⁵ to 1.1 × 10¹⁷ Pa s. Consequently, the assumption that the experimentally-derived plagioclase flow law is an appropriate proxy for the middle to lower continental crust may lead to a viscosity over-estimation by up to forty times.     

The Early Cretaceous Jacuí Group,a newly discovered volcaniclastic–epiclastic accumulation at the top of the Paraná Basin,southern Brazil

The presence of volcaniclastic rocks related to the silicic magmatism within the Serra Geral Formation has been a matter of long-standing debate. In this paper, we present extensive documentation that supports the presence and abundance of these rocks in the Jacuí Group, a newly discovered volcaniclastic and epiclastic accumulation in southern Brazil. The Jacuí Group is composed of two interfingered stratigraphic units, the Volta Alegre and Tupanciretã formations, and it represents the uppermost stratigraphic unit of the Paraná Basin. The Volta Alegre Formation is primarily composed of resedimented volcaniclastic tuffites, the pyroclasts which were sourced from the Santa Maria subgroup of the Palmas-type of the Serra Geral Formation. The Tupanciretã Formation is composed of fluvial and aeolian deposits transported towards the north–northwest. Deposition of the Jacuí Group began in the Early Cretaceous (∼132 Ma) and was coeval with the acidic volcanism of the Santa Maria subgroup. This group was deposited in a probable interior sag basin that represents either the beginning of the extension in the inner part of the continent that subsequently migrated to the east or the far-field impact of extensional processes that preceded the break-up of Gondwana and the opening of the South Atlantic Ocean.     

冀北中低级变质表壳岩的年代学特征及其对华北克拉通构造演化的约束

华北克拉通在新太古代末期发生克拉通化,形成了现今规模的古陆,大量的太古宙岩石均经历了~2500Ma左右的区域高级变质作用(高角闪岩相-麻粒岩相)。而华北克拉通北部冀北地区出露一套中低级变质(绿片岩相-角闪岩相)的火山-沉积岩系,主要包括胡麻营地区红旗营子表壳岩和大阴山地区单塔子表壳岩中变质程度较低的部分。胡麻营地区红旗营子表壳岩系主要岩石组合为变基性火山岩、绿帘角闪岩、斜长角闪岩、含石榴石斜长角闪岩、角闪斜长片麻岩、黑云斜长片麻岩、黑云角闪斜长片麻岩、黑云二长片麻岩、石英片岩、磁铁石英岩等,SIMS锆石U-Pb定年结果表明斜长角闪岩形成于2486±18Ma(MSWD=1.4),而黑云斜长片麻岩形成于2507±37Ma(MSWD=2.0)。大阴山地区单塔子中低级变质表壳岩系主要由浅变质火山岩、云母石英片岩、斜长角闪岩、磁铁石英岩和大理岩等组成,SHRIMP锆石U-Pb定年结果显示,浅变质火山岩中的变玄武岩形成于2490±19Ma(MSWD=2.0),而变英安岩形成于2502±8Ma(MSWD=0.83)。因此,冀北中低级变质的表壳岩系主要形成于新太古代末期,形成年龄为2507~2486Ma;结合冀东青龙地区新太古代末期(2511~2503Ma)的浅变质火山-沉积岩系(青龙表壳岩),我们认为新太古代末期,中低级变质表壳岩系广泛分布于华北克拉通的核部和边缘地区,此套岩系覆盖在太古宙高级变质杂岩之上,代表华北克拉通化之后的稳定盖层,是克拉通化的主要标志之一。     

塔里木盆地麦盖提斜坡奥陶纪地层划分对比及意义

以碳同位素值的波动变化与沉积环境、海平面升降及地层界面突变等地质事件相对应为理论依据,开展碳同位素地层研究,建立了各组值域划分标准,解决碳酸盐岩地层缺乏标准生物化石情况下,地层归属难确定的问题。指出奥陶系自下而上碳同位素曲线呈现稳定-上升-正漂移的过程。其中,下统蓬莱坝组—鹰山组δ~(13)C值范围为(-4.2~-0.2)×10~(-3),始终为负值;中统一间房组δ~(13)C值范围为(-0.4~0.6)×10~(-3),以分布在零值附近为特征;上统恰尔巴克组—良里塔格组δ~(13)C值范围(0.7~3.1)×10~(-3),均为正值。在此基础上,开展了巴楚典型露头剖面与麦盖提斜坡井下奥陶系碳同位素地层与岩石地层对比研究,提出麦盖提斜坡中部及东部断洼区发育上奥陶统,除东部断裂带外,普遍残存下奥陶统顶部泥晶灰岩段。     

长兴岛碳酸盐岩裂隙岩溶水特征分析

长兴岛碳酸盐岩区占整个岛的44%,受降雨、岩性、构造等条件的影响,岩溶较发育,地下水资源较丰富,且水质较好,适宜作为饮用水水源。在收集大量基础地质资料,并结合现场调查、钻探、抽水试验成果,分析了从上至下5层岩溶带的发育特征、赋水性规律及补、径、排条件。同时考虑供水水文地质条件,进行了天然资源和开采资源概算,及成井条件、水质的分析评价。     

汶川地震断裂带多次地震活动新证据

虹口乡八角庙出露完整的映秀—北川断裂带剖面断层岩,高分辨率磁化率测试揭示出多个具有高磁化率特征的断层岩带。系统的岩石磁学分析证明一层褐色断层岩相对围岩具有最大的磁化率值,存在新生成的磁铁矿和拥有相似的天然剩磁(NRM)和非磁滞剩磁(ARM)强度衰减过程。高磁化率特征是含铁顺磁性矿物受到断层滑移过程产生摩擦生热作用生成磁铁矿所致。同时断层岩还获得了热剩磁,记录了地震活动磁学信息。结合汶川地震科学钻探项目1号孔(WFSD-1)磁化率和岩石磁学研究结果,说明映秀—北川断裂带包含多层具有高磁化率特征的断层岩,暗示了多次强震的发生。具有高磁化率特征的断层岩可以作为判定地震活动的标志之一。     

黑龙江省嫩江县三矿沟Cu-Fe-Mo矿床岩浆岩成因研究

三矿沟Cu-Fe-Mo矿床是大兴安岭地区三矿沟—多宝山构造-成矿带中一个比较典型的矽卡岩型矿床。在大量野外地质调查、室内岩矿鉴定的基础上,对与成矿有关的三矿沟复式英云(花岗)闪长岩体的岩石地球化学特征进行了分析,探讨了该岩体的成因类型和构造环境。研究表明,该矿床岩浆岩体属于钙碱性I型花岗岩,具有大陆地壳的特征,形成于与造山花岗岩有关的火山弧环境或相似的构造环境中,主要与造山阶段的火山弧花岗岩关系密切。稀土元素配分图显示向右缓倾斜的轻稀土元素富集型特点,轻、重稀土分馏较为明显,无明显的负铕异常,暗示其具有相同或相近的成因,也反映了同源岩浆的特点。δEu值介于0.81~1.24,δCe值为1.00~1.13,表明岩浆演化过程中发生了微弱的分离结晶作用,同时又受到同化混染作用的一定影响,其成岩环境氧逸度较低,指示了缺氧环境,有利于金属元素的积聚而形成矿床。