Test of Hack's slope to bed material relationship in the Southern Eifel Uplands,Germany

The local reach gradient of small gravel bed rivers (drainage area 0-8-110 km²) in the Eifel, West Germany, is adjusted to transport the river bed sediments. Transport of gravel becomes possible under high flow conditions (Shields entrainment factor ≈-03). Mean bed material size for riffle sections increases with distance downstream. For small drainage areas channel slope is a negative exponential function of drainage area, while for the larger region the additional influence of bedload size has to be considered. Good agreement with Hack's data (1957) for Virginia and Maryland, U.S.A., is achieved (S = 0.0066 (D₅₀/A)^{- 40.}, r = 0.67).     

River adjustment to changes in sediment load: The effects of tin mining on the Ringarooma River,Tasmania, 1875–1984

The mining of alluvial tin in the Ringarooma basin began in 1875, reached a peak in 1900–20, and had virtually ceased by 1982. During that time 40 million m³ of mining waste were supplied to the main river, quickly replacing the natural bed material and requiring major adjustments to the channel. Based on estimates of sediment supply from more than 50 widely scattered mines and the frequency of flows capable of transporting the introduced load, the river's transport history is reconstructed using a mass-conservation model. Because of the lengthy time period (110 years) and river distance (75 km) involved, the model cannot predict detailed change but it does reproduce the main pattern of sediment movement in which successive phases of aggradation and degradation progress downstream. Peak storage is predicted in that part of the river where braiding and anastomosis are best developed. Aggradation was most rapid in the upper reaches close to major supply points, becoming slower and later with distance downstream. Channel width increased by up to 300 per cent where the valley floor was broad and braiding became relatively common. Bridges had frequently to be replaced. While bed levels were still rising in lower reaches, degradation began in upper ones, notably after 1950, and by 1984 had progressed downriver over 30 km. Rates of incision reached 0·5 m yr^?1, especially in the early 1970s when record high flows occurred. As a result of degradation the bed material became gravelly through either reexposure of the original bed or lag concentration of coarser fractions. Also a narrower unbraided channel has developed. The river is beginning to heal itself and upper reaches now have reasonably stable beds but at least another 50 years will be required for the river to cleanse its channel of mining debris.     

Small channels: Their experimental formation,nature, and significance

The manner in which small channels are generated, from plane beds beneath sheet flows, has been experimentally elucidated. On plane, erodible, sand beds, the transition from thin, supercritical sheet flows to the channelled condition was studied over ranges of discharge, slope, and temperature. Secondary flow of the second kind, its action facilitated by steep vertical velocity gradients in the primary flows, caused sheet-flow instability. Along junctions between neighbouring secondary cells, both either raised or lowered elements of the primary flow. In the latter case, fast surface water was lowered to the bed, causing relatively intense, local, longitudinal scour. Dislodged grains were moved divergently to either side, leaving straight, central trenches. Development of positive feedback between cells and trenches led to rapid enlargement of the latter and concomitant growth of paired levees. The resulting structures, ‘protochannels’, were themselves ephemeral, developing two types of instability associated with secondary flow of the first kind. Firstly, small deviations from bilateral symmetry were enhanced, causing evolution into meandering channels. Secondly, headcutting led to multiple tributary development and, at resulting confluences, the action of strong pairs of secondary cells led to the development of braiding channels. Because they are shortlived, protochannels are but rarely seen in nature. Their seeding is markedly temperature-sensitive, reflecting their frictional origin. The erosive power of shallow overland flow largely depends on flow-energy concentration by secondary flow, firstly into channels, then within the channels themselves. Suppression of secondary flow, as by intense raindrop bombardment, can stabilize sheet flows. In deeper water, the effects of secondary flow appear relatively less dramatic. However, even if such motion is weak, bedload divergence from attachment lines can favour entrainment locally and thus affect bed geometry. Analogy between our results and river behaviour appears close and. on continental shelves where water must often flow as sheets, structures resembling giant protochannels evidently persist.     

Long-term erosion on granitic roadcuts based on exposed tree roots

Exposed roots were used to estimate soil and bedrock erosion on the cut slopes of a 45-year-old road constructed in granitic soils of the Idaho Batholith. The original roadcut surface was defined by projecting a straight line from the toe of the cut past the end of the exposed root to the intersection of a straight line projected along the surface of the hillslope. A cross-sectioning technique was then used to determine erosion to the present roadcut surface. A total of 41 exposed root sites were used to estimate erosion on a 1350 m-long section of road. Average erosion was 1·0 and 1·1 cm/year for soil and bedrock respectively. Buttressing by tree roots caused lower erosion rates for soil as compared to bedrock. Both soil and bedrock erosion rates showed statistically significant correlations with the gradients of the original cut slope. The bedrock erosion data provide a reasonable estimate of the disintegration rate of exposed granitic bedrock exhibiting the weathering and fracturing properties common to this area. The road is located in a study watershed where long-term sediment yield data are available. Sediment data from adjacent study watersheds with no roads were compared to sediment data from the roaded watershed to estimate the long-term increase in sediment yield caused by the road. The increase amounts to about 2·4 m³/year. This figure, compared to the average annual on-site road erosion, provides an erosion to sediment delivery ratio of less than 10 per cent. Based on study results, road construction and maintenance practices are suggested for helping reduce roadcut erosion.     

Bedform morphology of salmon spawning areas in a large gravel-bed river

While the importance of river channel morphology to salmon spawning habitat is increasingly recognized, quantitative measures of the relationships between channel morphology and habitat use are lacking. Such quantitative measures are necessary as management and regulatory agencies within the Pacific Northwest region of the USA, and elsewhere, seek to quantify potential spawning habitat and develop recovery goals for declining salmon populations. The objective of this study was to determine if fall Chinook salmon (Oncorhynchus tshawytscha) spawning areas in the Snake River, Idaho, USA, were correlated with specific bedform types at the pool–riffle scale. A bedform differencing technique was used to objectively quantify the longitudinal riverbed profile into four distinct pool–riffle units that were independent of discharge. The vertical location of thalweg points within these units was quantified with a riffle proximity index. Chinook salmon spawning areas were mapped and correlated with the pool–riffle units through the use of cross-tabulation tables. The results indicate that 84% of fall Chinook salmon spawning areas were correlated with riffles (χ² = 57.5, df = 3, p < 0.001), with 53% of those areas located on the upstream side of riffle crests. The majority of Snake River fall Chinook salmon spawning occurred at elevations greater than 80% of the difference in elevation between the nearest riffle crest and pool bottom. The analyses of bedform morphology will assist regional fish managers in quantifying existing and potential fall Chinook salmon spawning habitat, and will provide a quantitative framework for evaluating general ecological implications of channel morphology in large gravel-bed rivers.     

The distribution of Potamothrix bavaricus (Oeschmann, 1913) (Oligochaeta) in anthropogenic freshwater habitats of an industrialised area (Upper Silesia, Poland)

The studies have revealed that Potamothrix bavaricus (Oeschmann, 1913), generally rare in Poland, is a common species in the benthic oligochaete fauna of different anthropogenic freshwater habitats in a heavily industrialised area of Poland. It was often found in habitats with significant salinity, a high total hardness and a large content of nutrients. The evident resistance to various pollutants enables the settlement of P. bavaricus in such habitats, which are unsuitable for other oligochaete species.     

REGULATION OF FLOW AND SEDIMENT LOAD IN THE YELLOW RIVER

Small runoff, large sediment load, and incompatible relationship of flow and sediment load are very important characteristics of the Yellow River. They are also the crux of the most prominent problems of the Yellow River. To solve these problems, the regimes of flow and sediment load have to be improved by increasing water, reducing sediment load, and by using reservoirs to regulate flow and sediment load. The results of experiments for regulating the flow and sediment load in the last three years by the Xiaolangdi Reservoir have indicated that this measure is a realistic and effective way to mitigate the prominent problems in flood control of the Lower Yellow River at present and in the near future. However, the regulation system is still imperfect. It is advisable to speed up the pace of research and construction of the system for regulating flow and sediment load.     

MCAI课件的开发

介绍了开发多媒体计算机辅助教学课件《台风》的设计思想及过程，其中包括系统分析、结构设计、关键技术和课件实现等，为相关人员开发MCAI（Multimedia Computer-Assisted Instruction)课件提供了借鉴。