Chlorophyll modulation of mixed layer thermodynamics in a mixed-layer isopycnal General Circulation Model — An example from Arabian Sea and equatorial Pacific

Western tropical Indian Ocean, Arabian Sea, and the equatorial Pacific are known as regions of intense bio-chemical-physical interactions: the Arabian Sea has the largest phytoplankton bloom with seasonal signal, while the equatorial Pacific bloom is perennial with quasi-permanent upwelling. Here, we studied three dimensional ocean thermodynamics comparing recent ocean observation with ocean general circulation model (OPYC) experiment combined with remotely sensed chlorophyll pigment concentrations from the Coastal Zone Color Scanner (CZCS). Using solar radiation parameterization representing observations that a higher abundance of chlorophyll increases absorption of solar irradiance and heating rate in the upper ocean, we showed that the mixed layer thickness decreases more than they would be under clear water conditions. These changes in the model mixed layer were consistent with Joint Global Ocean Flux Study (JGOFS) observations during the 1994-1995 Arabian Sea experiment and epi-fluorescence microscopy (EFM) on samples collected during Equatorial Pacific Ocean Climate Study (EPOCS) in November, 1988. In the Arabian Sea, as the chlorophyll concentrations peak in October (3 mg/m³) after the summer plankton bloom induced by coastal upwelling, the chlorophyll induced biological heating enhanced the sea surface temperature (SST) by as much as 0.6‡C and sub-layer temperature decreases and sub-layer thickness increases. In the equatorial Pacific, modest concentrations of chlorophyll less than 0.3 mg/m³ is enough to introduce a meridional differential heating, which results in reducing the equatorial mixed layer thickness to more than 20 m. The anomalous meridional tilting of the mixed layer bottom enhances off equatorial westward geostrophic currents. Consequently, the equatorial undercurrent transports more water from west to east. We proposed that these numerical model experiments with use of satellite andin situ ocean observations are consistent under three dimensional ocean circulation theory combined with solar radiation transfer process.     

The optical features and hydrocarbon-generating model of “barkinite” from Late Permian coals in South China

Leping coal is known for its high content of “barkinite”, which is a unique liptinite maceral apparently found only in the Late Permian coals of South China. “Barkinite” has previously identified as suberinite, but on the basis of further investigations, most coal petrologists conclude that “barkinite” is not suberinite, but a distinct maceral. The term “barkinite” was introduced by (State Bureau of Technical Supervision of the People's Republic of China, 1991, GB 12937-91 (in Chinese)), but it has not been recognized by ICCP and has not been accepted internationally.In this paper, elemental analyses (EA), pyrolysis-gas chromatography, Rock-Eval pyrolysis and optical techniques were used to study the optical features and the hydrocarbon-generating model of “barkinite”. The results show that “barkinite” with imbricate structure usually occurs in single or multiple layers or in a circular form, and no definite border exists between the cell walls and fillings, but there exist clear aperture among the cells.“Barkinite” is characterized by fluorescing in relatively high rank coals. At low maturity of 0.60–0.80%R_o, “barkinite” shows strong bright orange–yellow fluorescence, and the fluorescent colors of different cells are inhomogeneous in one sample. As vitrinite reflectance increases up to 0.90%R_o, “barkinite” also displays strong yellow or yellow–brown fluorescence; and most of “barkinite” lose fluorescence at the maturity of 1.20–1.30%R_o. However, most of suberinite types lose fluorescence at a vitrinite reflectance of 0.50% Ro, or at the stage of high volatile C bituminous coal. In particular, the cell walls of “barkinite” usually show red color, whereas the cell fillings show yellow color under transmitted light. This character is contrary to suberinite.“Barkinite” is also characterized by late generation of large amounts of liquid oil, which is different from the early generation of large amounts of liquid hydrocarbon. In addition, “barkinite” with high hydrocarbon generation potential, high elemental hydrogen, and low carbon content. The pyrolysis products of “barkinite” are dominated by aliphatic compounds, followed by low molecular-weight aromatic compounds (benzene, toluene, xylene and naphthalene), and a few isoprenoids. The pyrolysis hydrocarbons of “barkinite” are mostly composed of light oil (C₆–C₁₄) and wet gas (C₂–C₅), and that heavy oil (C₁₅⁺) and methane (C₁) are the minor hydrocarbon.In addition, suberinite is defined only as suberinized cell walls—it does not include the cell fillings, and the cell lumens were empty or filled by corpocollinites, which do not show any fluorescence. Whereas, “barkinite” not only includes the cell walls, but also includes the cell fillings, and the cell fillings show bright yellow fluorescence.Since the optical features and the hydrocarbon-generating model of “barkinite” are quite different from suberinite. We suggest that “barkinite” is a new type of maceral.     

甘肃小柳沟钨多金属矿地质特征及成矿模式

小柳沟钨多金属矿于 90年代初发现 ,目前已具大型、超大型规模。共有 4个矿床。成矿主要与长城系朱龙关群和隐伏花岗岩有关。该矿床成矿物质来源具双重性 ,成矿温度为中高温 ,成矿流体为中等盐度 ,同位素计算模式年龄确定其成矿于加里东期。矿床成因属于火山喷发沉积—岩浆热液改造矿床。     

Propriétés fractales de la fragmentation et processus stochastiques de fracturation : approche géométrique 3D à l'aide du modèle ObsifracFractal properties of fragmentation and stochastic fracturing processes: geometrical 3D approach by OBSIFRAC model

A numerical rock fragmentation model was elaborated, producing a 3D puzzle of convex polyhedra, geometrically described in a database. In the first scenario, a constant proportion of blocks are fragmented at each step of the process and leads to fractal distribution. In the second scenario, division affects one random block at each stage of the process, and produces a Weibull volume distribution law. Imposing a minimal distance between the fractures, the third scenario reveals a power law. The inhibition of new fractures in the neighbourhood of existing discontinuities could be responsible for fractal properties in rock mass fragmentation. To cite this article: L. Empereur-Mot, T. Villemin, C. R. Geoscience 334 (2002) 127–133.     

可调滞回模型的磁流变阻尼器及其试验

本文在现在磁流变阴尼器性能研究的基础上，提出了可调滞回模型的磁流变阻尼器及其试验方法，并进行理论、试验及算例分析。首先，根据恒定电流下磁流变阻尼器的阻尼力滞力特性，利用磁流变材料特性的电流（即磁场）可控特点，建立了变电流下的阻尼力滞回模型；其次，在中通过电路板控制外加电流与装置变形间的函数关系，实现了变电流调节的阻尼力滞回模型；最后，将磁流变阻尼器与橡胶隔震装置结合，形成智能磁流变隔夺装置，并对一个单自由度隔震结构进行了数值仿真分析。     

MODELING THE FATE AND TRANSPORT OF HYDROPHOBIC ORGANIC COMPOUNDS IN AN UNSTEADY RIVER-ESTUARINE SYSTEM

1 INTRODUCTION Extensive literature (Brown et al., 1985; Sawhney et al., 1981; Bierman and Swain, 1982; Connolly, 1980; Lopez-Avila and Hites, 1980; O扖onnor, 1988) described lots of sorbed pollutants or toxic substances in bed sediments of rivers, even after the effluent was halted for a long time. This is particularly true for hydrophobic organic compounds that can be sorbed on the particles and accumulated in the river bed sediments (Karickhoff et al., 1979). Pollution events of…     

《CT理论与应用研究》杂志新刊标和地幔速度模型的说明

在《ＣＴ理论与应用研究》杂志１９９４~２００１年本杂志“刊标”的基础上,在其上方增加了象征三维体视学成像的三角形四面体的透视图;该刊标的右下侧为医学断面成像扫描仪(包括各种Ｘ－ＣＴ机与核磁共振ＭＲＩ扫描仪等);其左下侧为三维地幔速度模型和地球核的示意图,切出有两个地幔剖面,表示纵波速度二维变化的剖面。该速度剖面系根据赵大鹏教授的理论和计算方法,按照地球上的两个大圆弧做计算和绘制的彩色图,排在本期封４:第一大圆弧,从北极经西巴基斯坦(２８°Ｎ, ６４°Ｅ)到马尔代夫群岛(３°Ｎ,７３°Ｅ);第二大圆弧从马尔代夫群岛点(３°Ｎ,７３°Ｅ)连接巴布新几内亚之南点(１２°Ｓ,１５０°Ｅ),来计算两剖面速度分布并作图的结果,其具体分布参见封４的两条彩色剖面和相应的地理位置图。由于赵教授这篇论文[１]在中国国内只有很少数图书馆收藏,在Ｅｌｓｅｖｉｅｒ Ｓｃｉｅｎｃｅ的ＥＰＳＬ网站上一般人只能查到摘要,本刊对于该地幔速度模型的制作方法和所用数据资料,该模型的优越性和特征进行了叙述,他所用的地震事件数目,多达７１２８个;用于层析反演成像的震相到时数多到近一百万条。该速度如下的特点:在所采用的速度结构中,包含用几个复杂形状的地质速度界面,如莫霍面,以及下沉板块的分界     

A cellular model of Holocene upland river basin and alluvial fan evolution

The CAESAR (Cellular Automaton Evolutionary Slope And River) model is used to simulate the Holocene development of a small upland catchment (4·2 km²) and the alluvial fan at its base. The model operates at a 3 m grid scale and simulates every flood over the last 9200 years, using a rainfall record reconstructed from peat bog wetness indices and land cover history derived from palynological sources. Model results show that the simulated catchment sediment discharge above the alluvial fan closely follows the climate signal, but with an increase in the amplitude of response after deforestation. The important effects of sediment storage and remobilization are shown, and findings suggest that soil creep rates may be an important control on long term (>1000 years) temperate catchment sediment yield. The simulated alluvial fan shows a complex and episodic behaviour, with frequent avulsions across the fan surface. However, there appears to be no clear link between fan response and climate or land use changes suggesting that Holocene alluvial fan dynamics may be the result of phases of sediment storage and remobilization, or instabilities and thresholds within the fan itself. Copyright © 2002 John Wiley & Sons, Ltd.     

MODIFIED MASS FLUX CUMULUS CONVECTIVE PARAMETERIZATION SCHEME AND ITS SIMULATION EXPERIMENT—PART Ⅰ:MASS FLUX SCHEME AND ITS SIMULATION OF THE 1991 FLOOD EVENT*

Based on the existing cumulus convective parameterization schemes,a mass flux scheme (MFS) for cumulus convective parameterization has been successfully developed by reference to the work of Chen et al. (1996).The MFS is a comprehensive scheme.In MFS,not only the importance of the large-scale moisture convergence is taken into account,but also it includes the cumulus updrafts and downdrafts,cumulus-induced subsidence in the environmental air.entrainment,detrainment and evaporation.The interaction between the cumulus and the environment is described by using a one-dimensional bulk model.At the same time the scheme includes the penetrative and shallow convections.The MFS has been successfully incorporated into the regional climate model RegCM2 developed by NCAR.The new model has been applied to simulate summer monsoon characteristics and their variations of heavy rainfall process in the Changjiang-Huaihe River Basins for three months from May to July 1991.The results show that the new model can successfully simulate this rainfall prolonged process.By comparising the model outputs of RegCM2.using the Kuo scheme and the MFS.it is found that the MFS is better in simulating the surface temperature,rainfall position and amount,and rainfall duration.     

应力释放模型的改进及其在研究台湾地区地震预测问题中的应用.

应力释放模型过去主要用于研究大范围历史大地震活动规律．本文对应力释放模型进行了改进，对其能否运用于区域更小、时段更短、震级更低的情况进行了探讨；以台湾地区近百年6级以上地震为例的研究结果表明，应力释放模型仍然适用．在回溯性的地震预测检验中，用改进的应力释放模型计算出台湾地区地震发生的条件概率强度，并用其预测6级以上地震的发震时刻．结果表明，其预测精度优于泊松模型．