GPS伪卫星的组合定位技术及其误差分析

介绍了GPS伪卫星组合定位的观测模型,详细论述了GPS伪卫星组合定位中存在的误差源,并对各误差源的消除方法进行了分析。     

GM（1，1）动态模型在吴江市地下水水位预测中的应用

以吴江市地下水水位预测为例,详细阐述了地下水水位时间序列的GM（1,1）动态模型的原理和建立过程,并根据模型的预测值和实测值,对模型的精度进行了检验,结果表明,模型的预测精度达到了99．27％,等级属于Ⅰ级,具有实际的应用价值,为地下水资源的科学管理提供了依据。     

城市空间信息基础设施建设结构模型研究

首先对WebGIS的发展状况进行了分析,然后介绍了Web Services的工作原理,给出了面向Geo-Services的城市空间信息基础设施建设的结构模型,并依据该模型对北京市基础地理信息数据库集成项目进行了典型研究.     

天然气溶解过程中组分分馏模型及其应用

天然气不同组分在水中溶解度的差异,导致溶解相与残留游离相天然气组分组成不同,即发生组分的溶解分馏效应。溶解分馏效应在天然气水溶运移、溶解散失等过程中均有发生。揭示天然气组分的溶解分馏规律、建立定量分馏模型,有助于天然气气源对比和成藏过程示踪。以Henry定律为依据,对不同组分溶解特征分析,提出了溶解度分数的概念,并建立了溶解分馏模型。根据该模型和各组分的溶解度分数和天然气溶解量,可计算各组分的溶解分馏量,恢复天然气初始组成特征。计算表明,威远震旦系气藏初期的天然气组成为:CH4为72.70%,C2H6为0.09%,CO2为22.41%,N2为4.07%,干燥系数(C1/C1-5)为99.876%。溶解作用使天然气中CO2含量显著降低,烃类气体含量增加,而天然气干燥系数降低。结果有助于天然气成因判识和气源对比等。     

利用UML模型构建Geodatabase的方法与实践

利用UML模型生成Geodatabase数据库便于数据库的更新及移植,同时能很好地反映数据库结构及对象之间的关系。论文分析了利用VISIO建模工具构建Geodatabase的UML模型以及在此基础上利用ArcGIS Desktop相关模块生成Geodatabase数据库的方法,并以上海市绿化林业信息数据库为例,演示了Geodatabase的创建及更新过程。     

Dynamic data integration for structural modeling: model screening approach using a distance-based model parameterization

This paper proposes a novel history-matching method where reservoir structure is inverted from dynamic fluid flow response. The proposed workflow consists of searching for models that match production history from a large set of prior structural model realizations. This prior set represents the reservoir structural uncertainty because of interpretation uncertainty on seismic sections. To make such a search effective, we introduce a parameter space defined with a “similarity distance” for accommodating this large set of realizations. The inverse solutions are found using a stochastic search method. Realistic reservoir examples are presented to prove the applicability of the proposed method.     

Mechanism for the rapid motion of the Qianjiangping landslide during reactivation by the first impoundment of the Three Gorges Dam reservoir, China

The first impoundment of the Three Gorges Dam reservoir in China started from a water surface elevation of 95 m on June 1, 2003 and reached 135 m on June 15, 2003. Shortly after the water level reached 135 m, many slopes began to deform and some landslides occurred. The Qianjiangping landslide is the largest one; it occurred on the early morning of July 14, 2003 and caused great loss of lives and property. Field investigation revealed that, although failure occurred after the reservoir reached 135 m, the stability of the slope was already reduced by preexisting sheared bedding planes. To study the mechanism of the rapid motion of this reactivated landslide, two soil samples were taken from a yellow clay layer and a black silt layer in the sliding zone, respectively, and a series of ring shear tests were conducted on the samples. One series of ring shear tests simulates the creep deformation behavior, while the other series simulates different shear rates. Conclusions drawn from analysis of the ring shear tests indicate that the mechanism of the rapid motion of the reactivated landslide was caused by the rate effect of the black silt layer during the motion phase after the creep failure. The yellow clay layer did not play any important role in the rapid motion in the 2003 event.     

塔里木盆地巴楚地区中奥陶统一间房组露头礁滩复合体储层地质建模及其对塔中地区油气勘探的启示

通过1：5万礁滩复合体地质填图,在巴楚地区共发现大小不等的礁滩复合体90余个,层位为中奥陶统一间房组二段．台缘为礁滩复合体密集发育区,礁滩体规模大,台内为礁滩复合体零星发育区,礁滩体规模小。通过对6个典型礁滩复合体的解剖,研究了礁滩复合体的微相类型、组合和各微相的岩石特征、生物群落,并对其生长发育阶段进行了分析。根据6个典型礁滩复合体及礁间的大量铸体薄片鉴定和物性资料,分析了储层的特征、成因和非均质性,建立了台缘礁及礁间、台内礁及礁间2种背景条件下的储层地质模型。巴楚地区露头礁滩复合体储层地质模型对塔中地区上奥陶统良里塔格组礁滩复合体的勘探具有重要的指导意义,并为勘探实践所证实。     

地面核磁共振模型约束反演含水层参数

导电模型的地面核磁共振感应电动势是含水量的非线性函数.引入模型约束的迭代反演方法求解该非线性问题的反演.在反演过程中,根据理论公式计算迭代过程中灵敏度矩阵,并采用平坦模型和光滑模型两种约束.对均匀半空间、层状导电模型和实际数据进行了反演模拟,结果表明,模型约束迭代反演方法能从地面核磁共振感应电动势获得含水层较为合理的含水量及分布,且该结果可以从作为初始模型的均匀含水量分布反演得到.对无噪音数据,平坦模型和光滑模型约束对反演的含水量分布影响不大;但当数据存在一定的噪音时,平坦模型约束将比光滑模型约束获得更为精确的含水层参数.     

初至层析静校正在复杂山地三维地震勘探中的应用

随着地形高差增大、地貌单元多变、近地表模型复杂,目前被广泛应用的初至折射静校正的精度已无法满足精细勘探的要求。初至层析静校正技术,由给定的初始模型进行正演,用射线追踪方法得到初始模型的初至波,利用该初至波和实际拾取的初至波进行比较,计算地表模型的修正量,反复迭代求得准确的地表模型。山西省国阳新能股份有限公司二矿390水平九采扩区地表标高940～1100m,地貌单元复杂,在对该区资料处理时,利用初至层析折射静校正,经9次迭代计算后,真实地刻划出近地表模型。在二种静校正技术对比中,初至折射静校正不但近地表模型精度低于层析折射静校正,而且其叠加剖面精细程度也远低于层析静校正,如在初至折射静校正叠加剖面同相轴上呈现的凹凸形态,在层析静校正叠加剖面并无显示,且后者剖面的信噪比也比前者明显提高。