An approximate projection of availability of the fresh groundwater resources in the South West district of NCT Delhi, India: a case study

The future availability and sustainability of fresh groundwater resources in the South West district of the national capital territory (NCT) Delhi, India, have been projected. Due to a rapid decline in groundwater level and quality, the district has been required by the Government of India to regulate development of groundwater resources. Shallow groundwater is mostly saline and water resources in the area are limited. The methodology applied here involves microzonation of the district in terms of thickness of fresh groundwater and then quantification of present and future availability of freshwater in different freshwater zones, including tentative timescales. The calculation method has been aided by data on historic trends in water level at representative groundwater monitoring stations, located either in fresh groundwater zones or near to them. It is estimated that the presently available 481 million m³ of resources will be reduced to 374 million m³ by year 2007 and to 303 million m³ by the year 2012, and by the year 2022 the district will have only 176 million m³ of available fresh groundwater resources.     

Hydrogeology of thermal waters in Viterbo area, central Italy

A conceptual hydrogeological model of the Viterbo thermal area (central Italy) has been developed. Though numerous studies have been conducted on its geological, geochemical and geothermal features, there is no generalized picture defining the origin and yield of the hydrothermal system. These latter aspects have therefore become the objectives of this research, which is based on new hydrogeological and geochemical investigations. The geological setting results in the coexistence of overlapped interacting aquifers. The shallow volcanic aquifer, characterized by fresh waters, is fed from the area around the Cimini Mountains and is limited at its base by the semiconfining marly-calcareous-arenaceous complex and low-permeability clays. To the west of Viterbo, vertical upflows of thermal waters of the sulphate-chloride-alkaline-earth type with higher gas contents, are due to the locally uplifted carbonate reservoir, the reduced thickness of the semiconfining layer and the high local geothermal gradient. The hot waters (30–60°C) are the result of deep circulation within the carbonate rocks (0.5–1.8 km) and have the same recharge area as the volcanic aquifer. The upward flow in the Viterbo thermal area is at least 0.1 m³/s. This flow feeds springs and deep wells, also recharging the volcanic aquifer from below.     

The growth, collapse and quiescence of Teno volcano, Tenerife: new constraints from paleomagnetic data

Tenerife basically consists of three Miocene shield volcanoes, the Anaga, the Teno and Central shield, as well as the Pliocene Cañadas volcano. The temporal evolution and structural significance of each volcano with respect to the history of Tenerife is still a matter of debate. We present paleomagnetic results in order to enhance the view of the volcanic history of the Teno volcano by means of magnetostratigraphy. It is found that the initial subaerial phase shows reverse magnetizations throughout. After two major sector collapses, dominantly normally magnetized lavas extruded. Comparisons of observed magnetic polarities with the geomagnetic polarity timescale show that these volcanic activities occurred within 0.4 Myr between 6.3 and 5.9 Ma. Significantly younger flows, ～ 5.3 Myr old according to their radiometric age, revealed again normal polarity throughout. The absence of inversely magnetized lavas in-between the two normal periods indicates a volcanic hiatus or erosional phase. The evolutionary sequence and the estimated high production rates for the initial building phase are similar as would be expected for a hotspot volcano. The average geomagnetic field for 6.0 ± 0.2 Ma is close to an axial dipole field showing a slight far-sided/right-handed effect. The field strength, determined by Thellier-type intensity determinations, corresponds to a virtual axial dipole moment of 4.9 × 10²² A m². This value is approximately half of the present day field strength, but similar to values obtained for the mid-Miocene. It also corresponds to the proposed tertiary low-field level of the geomagnetic dipole moment.     

东准噶尔纸房地区晚石炭世巴塔玛依内山组陆相火山-沉积体系特征

东准噶尔巴塔玛依内山组是典型陆相火山．沉积体系(盆地)，主体由基性及中酸性火山熔岩组成，火山碎屑岩及火山碎屑沉积岩较少，通过对纸房地区晚石炭世巴塔玛依内山组陆相火山岩的岩石化学、地球化学特征进行系统研究，认为它属于造山期后固结初期，新陆壳裂谷向高原火山岩演化的同岩浆源、同沉积盆地、同火山作用的钙碱系列双峰式火山岩．     

河南焦作云台山早前寒武纪变质基底锆石SHRIMP U-Pb年龄

应用离子探针技术,对华北太行山南缘钾长石化长英质副片麻岩和钾长石化片麻状奥长花岗岩进行了锆石年龄测定。钾长石化长英质副片麻岩的变质原岩为泥砂质碎屑沉积岩,其形成时代很可能为新太古代。碎屑锆石普遍存在强烈铅丢失,靠近上交点的5个数据点207Pb/206Pb加权平均年龄为3399Ma±8Ma,代表了物源区组成的时代。钾长石化片麻状奥长花岗岩2组锆石207Pb/206Pb加权平均年龄分别为2511Ma±13Ma(岩体形成时代)和2735Ma±16Ma(残余锆石年龄),分别代表该岩体形成时代和残余锆石年龄。新的资料支持了华北克拉通中部造山带太古宙地质体与其东部陆块存在亲缘关系的认识。     

利用ERS-2 SAR图像纹理分析方法揭示长白山天池火山近代喷发物空间分布特征

简单介绍了SAR图像的纹理特征以及正交小波变换纹理提取方法。论述了SAR图像的纹理特征参与分类的重要性。以长白山天池火山为例,通过对ERS2SAR图像进行纹理分析,提取了SAR图像两个层次的尺度变化、时频局部化和方向性纹理特征。并将SAR纹理特征与TM图像及DEM进行复合,利用多源信息各自的优势,进行了BP神经元网络分类,从较大范围对长白山天池火山735±15aB.P.大喷发的喷发物空间分布进行评价。获取了长白山天池火山近代喷发物的空间分布及规模。这对长白山天池火山未来喷发危险性初步评价、火山地质制图及火山灾害预测有重要意义。     

张北地震区三维构造特征

地震层析成像结果揭示了张北地震区的构造特征。震源区周围分布有相交的北北西和北东向低速异常带。极震区正下方壳内存在高速异常的坚固体 ,其周围被多条低速异常带围限。区域构造具备了大量积累应变能和向高应力区传递应变能的孕震构造特征 ,北北西和北东向的隐伏断裂共同构成了区域的发震构造。该震区在中新生代以来有过多期岩浆活动 ,震中区周围分布有几个新第三纪的火山口。极震区米家沟附近火山的三维剖分图给出了该火山从地表到壳内 10km深度的速度图像 ,中新生代的火山岩浆活动对该区域孕震构造的形成起了重要作用。     

Tectonic setting and petrogenesis of the Çelebi granitoid, (Kırıkkale-Turkey) and comparison with world skarn granitoids

Many studies have shown systematic correlations between the composition of plutons worldwide and the metal content of associated skarns. This is the first report of similar correlations between the composition of Çelebi granitoid and skarns of the Çelebi district in Central Anatolia, Turkey. The Çelebi district is well known for its polymetallic Fe–W and Cu vein ores. These are hosted by calcic skarn zones. Both exoskarns (pyroxene–garnet) and endoskarns (epidote–pyroxene) occur in the district formed mainly along the granitoid contacts and along the fractures within the marble. Based on mineralogy, petrology and geochemistry, two different igneous rocks were recognized in the Çelebi granitoid, referred to as leucocratic (felsic) and mesocratic (intermediate) Çelebi granitoid. The leucocratic Çelebi occurs as dominant rock type, and is classified as granite. The mesocratic Çelebi is not widespread and is classified as adamellite, tonalite, quartz monzonite and quartz monzodiorite. The mesocratic Çelebi has I-type characteristics, and have subalkaline, calc-alkaline and metaluminous characteristics like most worldwide skarn granitoids.A post-collisional tectonic setting is proposed on the basis of field evidence, the relative timing of intrusions with respect to metamorphic and obducted ophiolitic rocks and trace element geochemistry. The high abundance of La and Ce and the enrichment of V in mafic components suggest that Çelebi granitoids are formed by partial melting of mantle rocks, but have been contaminated by interaction with continental crust involving possible magma mixing processes (i.e. mixing of coexisting felsic and mafic magmas). In the district, the mesocratic type and mafic microgranular enclaves (MME) mainly within leucocratic type represent a mafic underplating magma that was mixed with and/or injected into felsic magma of the leucocratic type.The present study shows that Fe mineralization is associated with mesocratic Çelebi type, whereas W mineralization is associated with leucocratic type. Mesocratic Çelebi granitoid is significantly different from the worldwide average of plutons associated with Fe skarns. In particular, MgO vs. SiO₂, FeOt+CaO+Na₂O/K₂O vs. SiO₂, Fe₂O₃/Fe₂O₃+FeO vs. SiO₂ and V vs. Ni vary from typical values (are lower than values typical for plutons associated with Fe skarns) for plutons associated with Fe skarns. Instead, it resembles the geochemical characteristics of plutons associated with worldwide Cu and possibly Au skarns. This suggests new exploration possibilities for copper and gold in the Çelebi district.     

Analyzing CO2 emissions mitigation by technology improvement in Central and Eastern Europe

As a legacy of the centrally planned economy, the economies in transition of Central and Eastern Europe (CEE) have a unique potential to reduce their greenhouse gas emissions through the improvement in their high energy intensities. Since much of this `low-hanging fruit' in energy-efficiency improvements can be highly cost-effective, many developed countries facing difficulties in meeting their greenhouse gas (GHG) emission targets domestically are eager to find such opportunities in the CEE region. Therefore, studies analysing the potentials and costs of carbon dioxide reduction through technology improvement in the region have come into the limelight. While there are a few excellent studies in the region aimed at analysing climate change abatement potentials, they all embark on different assumptions, methodologies and boundary conditions. It is hence difficult, if not impossible, to compare and analyse the results of these studies across different authors, countries or time horizons. Consequently, the purpose of this paper is to place four leading studies on GHG mitigation through technology improvement from the CEE region into an internationally comparable framework. Four studies were selected from three countries, Poland, Hungary and Estonia, which are all the results of major national and international efforts to assess costs and potentials of GHG reduction. The paper places their assumptions, methods and final results into a framework which enables policy-makers and project designers to compare these across geographical and technological boundaries. Since other studies from around the globe have been analysed in this framework in the literature, this paper provides a vehicle for the findings of these four studies to be compared to others worldwide. In addition, the paper highlights a few areas where similar studies to be completed in the future in the region may be enhanced by incorporating features used in GHG mitigation research in other parts of the world. This revised version was published online in July 2006 with corrections to the Cover Date.