论胶莱盆地的改造与原型盆地恢复

改造盆地的研究具有重要的石油勘探意义。通过系统分析对比原型盆地与改造型盆地认为胶莱盆地具有改造型盆地的特征。根据胶莱原型盆地的改造过程及其特点的探讨、国内改造型盆地研究实例分析及胶莱盆地改造型盆地研究的欠缺，对胶莱盆地改造型盆地进行了充分论证。最后，指出胶莱盆地的改造与原型盆地恢复的关键在于判断胶莱原型盆地构造性质、原型盆地恢复采用的理念及多种研究方法相结合。     

合肥盆地钻井地层的同位素测年与地层划分

合肥盆地内部中、新界地层大面积被第四系覆盖，其地层的时代与划分主要依赖已有的6口深井地层资料。由于缺乏可靠的化石记录，这6口深井地层时代与划分一直存在着很大的分歧，制约了对该盆地的油气勘探与远景评价。本文利用这6口深井泥岩类岩屑中自生伊利石，在其结晶度分析基础上，进行了K-Ar同位素测年，成功地获得了不同深度上的地层形成时代。据此地层年龄，文中对这6口深井所钻遇的地层进行了重新的划分。     

(40)~Ar/(39)~Ar chronology and geochemistry of high-K volcanic rocks in the Mangkang basin, Tibet

Our two newly obtained high-quality 40Ar/39Ar ages suggest that the high-K volcanic rocks of the Lawuxiang Formation in the Mangkang basin, Tibet were formed at 33.5±0.2 Ma. The tracing of elemental and Pb-Sr-Nd isotopic geochemistry indicates that they were derived from an EM2 enriched mantle in continental subduction caused by transpression. Their evidently negative anomalies in HFSEs such as Nb and Ta make clear that there is an input of continental material into the mantle source. The high-K rocks at 33.5±0.2 Ma in the Mangkang basin may temporally, spatially and compositionally compare with the early one of two-pulse high-K rocks in eastern Tibet distinguished by Wang J. H. et al., implying that they were formed in the same tectonic setting.     

A precise monitoring of snow surface height in the region of Lambert Glacier basin-Amery Ice Shelf,East Antarctica

The net surface snow accumulation on the Antarctic ice sheet is determined by a combination of precipitation, sublimation and wind redistribution. We present a one-year record of hourly snow-height measurements at LGB69 (70°50'S, 77°04'E, 1850 m a.s.l.). east side of Lambert Glacier basin (LGB), and 4 year record at G3 (70°53'S, 69°52'E, 84 m a.s.l.), Amery Ice Shelf (AIS). The measurements were made with ultrasonic sensors mounted on automatic weather stations installed at two sites. The snow accumulation at LGB69 is approximately 70 cm. Throughout the winter, between April and September, there was little change in surface snow height (SSH) at the two sites. The negative SSH change is due to densification at LGB69, and is due to both ablation and densification at G3. The strongest accumulation at two sites occurred during the period between October and March (accounting for 101.6% at LGB69), with four episodic increasing events occurring during 2002 for LGB69, and eight events during 1999-2002 for G     

Geochemical characteristics of the metapelites from the Xingxingxia group in the Eastern Segment of the Central Tianshan: Implications for the provenance and paleoweathering

Clastic sedimentary rocks record a number of in-formation about the compositions and paleoweathering conditions of the source areas, and the tectonic setting of the depositional basin[1―6]. The traditionallypetrological study commonly utilizes the major com-ponents (Quartz, Feldspar and Lithics) of the silici-clastic sedimentary rocks to investigate the source rock composition and tectonic setting[7]. However, thepetrological method is somewhat limited, because many of the mafic components f…     

Impact of warmer climate on melt and evaporation for the rainfed, snowfed and glacierfed basins in the Himalayan region

The impact of warmer climate on melt and evaporation was studied for rainfed, snowfed and glacierfed basins located in the western Himalayan region. Hydrological processes were simulated under current climatic conditions using a conceptual hydrological model, which accounts for the rainfall–runoff, evaporation losses, snow and glacier melt. After simulations of daily observed streamflow (R²=0.90) for 6 years, the model was used to study the impact of warmer climate on melt and evaporation. Based on the future projected climatic scenarios in the study region, three temperature scenarios (T+1, T+2 and T+3 °C) were adopted for quantifying the effect of warmer climate. The comparison of the effect of warmer climate on different types of basins indicated that the increase in evaporation was the maximum for snowfed basins. For a T+2 °C scenario, the annual evaporation for the rainfed basins increased by about 12%, whereas for the snowfed basins it increased by about 24%. The high increase of the evaporation losses would reduce the runoff. It was found that under a warmer climate, melt was reduced from snowfed basins, but increased from glacierfed basins. For a T+2 °C scenario, annual melt was reduced by about 18% for the studied snowfed basin, while it increased by about 33% for the glacierfed basin. Thus, impact of warmer climate on the melt from the snowfed and glacierfed basins was opposite to each other. The study suggests that out of three types of basins, snowfed basins are more sensitive in terms of reduction in water availability due to a compound effect of increase in evaporation and decrease in melt. For a complex type of basin, the decrease in melt from seasonal snow may be counterbalanced by increase in melt from glaciers. However, on long-term basis, when the areal extent of glaciers will decrease due to higher melt rate, the water availability from the complex basins will be reduced.     

山东泰安朱家庄自然硫矿床地质概要

山东省泰安朱家庄自然硫矿床,赋存于鲁西断隆古近纪汶东陆相盆地。自然硫矿层在汶口组二段上亚段,泥质灰岩-含泥灰岩-含云灰岩-石膏岩韵律层中的白云岩-石膏岩层段发育。自然硫以胶态、晶态、土态3种形态产出,可划分为顺层型、准顺层型、斑杂型及不顺层型4大类10余种矿石类型。从矿区去膏化作用普遍、自然硫与石膏-硬石膏分别富集轻-重同位素的特征、油气显示明显及地下水主要径流方向自然硫矿化最强等各种证据,表明该矿属生物后生成因的矿床。     

Ruthenium-ion-catalyzed oxidation of asphaltenes and oil-source correlation of heavy oils from the Lunnan and Tahe oilfields in the Tarim Basin, NW China

The identification of marine source rocks in the Tarim Basin is debated vigorously. The intention of this paper is to investigate the asphahenes in heavy oils from the Lunnan and Tabe oilfields and Well TD2 with ruthenium-ions-catalyzed oxidation technique (RICO), in order to explore its role in oil-oil and oil-source correlations, The RICO products included n-alkanoic acids, α,ω-di-n-alkanoic acids, branched alkanoic acids, tricyclic terpanoic acids, hopanoic acids, gammacerane carboxylic acid , regular sterane carboxylic acids and 4-methylsterane carboxylic acids. The n-alkyl chains and biomarkers bounded on the asphaltenes were of unsusceptibility to biodegradation. The distribution and absolute concentrations of n-alkanoic acids in the RICO products of heavy oils from the Lunnan and Tabe oilfields are different from those of Well TD2. The biomarkers bounded on the asphahenes, especially steranes, have a distribution trend similar to that of the counterparts in saturates. The sterane carboxylic acids and 4-methylsterane carboxylic acids in the RICO products of heavy oils from the Lunnan and Tahe oilfields, dominated by C30 sterane and C31 4-methylsterane carboxylic acids, respectively, are significantly different from those of the heavy oils of Well TD2, whose dominating sterane and 4-methylsterane carboxylic acids are C28 sterane and C29 4-methylsterane acids, respectively. The RICO products of the asphaltenes further indicate that the Middle-Upper Ordovician may be the main source rocks for heavy oils from the Lunnan and Tabe oilfields.     

Hydro-geomorphic hazards and impact of man-made structures during the catastrophic flood of June 2000 in the Upper Guil catchment (Queyras, Southern French Alps)

The Guil River Valley (Queyras, Southern French Alps) is prone to catastrophic floods, as the long historical archives and Holocene sedimentary records demonstrate. In June 2000, the upper part of this valley was affected by a “30-year” recurrence interval (R.I.) flood. Although of lower magnitude and somewhat different nature from that of 1957 (>100-year R.I. flood), the 2000 event induced serious damage to infrastructure and buildings on the valley floor. Use of methods including high-resolution aerial photography, multi-date mapping, hydraulic calculations and field observations made possible the characterisation of the geomorphic impacts on the Guil River and its tributaries. The total rainfall (260 mm in four days) and maximum hourly intensity (17.3 mm h⁻¹), aggravated by pre-existing saturated soils, explain the immediate response of the fluvial system and the subsequent destabilisation of slopes. Abundant water and sediment supply (landsliding, bank erosion), particularly from small catchment basins cut into slaty, schist bedrock, resulted in destructive pulses of debris flow and hyperconcentrated flows. The specific stream power of the Guil and its tributaries was greater than the critical stream power, thus explaining the abundant sediment transport. The Guil discharge was estimated as 180 m³ s⁻¹ at Aiguilles, compared to the annual mean discharge of 6 m³ s⁻¹ and a June mean discharge of 18 m³ s⁻¹. The impacts on the Guil valley floor (flooding, aggradation, generalised bank erosion and changes in the river pattern) were widespread and locally influenced by variations in the floodplain slope and/or channel geometry. The stream partially reoccupied former channels abandoned or modified in their geometry by various structures built during the last four decades, as exemplified by the Aiguilles case study, where the worst damage took place. A comparative study of the geomorphic consequences of both the 1957 and 2000 floods shows that, despite their poor maintenance, the flood control structures built after the 1957 event were relatively efficient, in contrast to unprotected places. The comparison also demonstrates the role of land-use changes (conversion from traditional agro-pastoral life to a ski/hiking-based economy, construction of various structures) in reducing the Guil channel capacity and, more generally, in increasing the vulnerability of the human installations. The efficiency of the measures taken after the 2000 flood (narrowing and digging out of the channel) is also assessed. Final evaluation suggests that, in such high mountainous environments, there is a need to keep most of the 1957 flooded zone clear of buildings and other structures (aside from the existing villages and structures of particular economic interest), in order to enable the river to migrate freely and to adjust to exceptional hydro-geomorphic conditions without causing major damage.     

DEM-based morphometry of range-front escarpments in Attica, central Greece, and its relation to fault slip rates

In this paper, we apply current geological knowledge on faulting processes to digital processing of Digital Elevation Models (DEM) in order to pinpoint locations of active faults. The analysis is based on semiautomatic interpretation of 20- and 60-m DEM and their products (slope, shaded relief). In Northern–Eastern Attica, five normal fault segments were recognized on the 20-m DEM. All faults strike WNW–ESE. The faults are from west to east: Thriassion (THFS), Fili (FIFS), Afidnai (AFFS), Avlon (AVFS), and Pendeli (PEFS) and range in length from 10 to 20 km. All of them show geomorphic evidence for recent activity such as prominent range-front escarpments, V-shaped valleys, triangular facets, and tilted footwall areas. However, escarpment morphometry and footwall geometry reveal systematic differences between the “external” segments (PEFS, THFS, and AVFS) and the “internal” segments (AFFS and FIFS), which may be due to mechanical interaction among segments and/or preexisting topography. In addition, transects across all five escarpments show mean scarp slope angles of 22.1°±0.7° for both carbonate and metamorphic bedrock. The slope angle equation for the external segments shows asymptotic behaviour with increasing height. We make an empirical suggestion that slope angle is a function of the long-term fault slip rate which ranges between 0.13 and 0.3 mm/yr. The identified faults may rupture up to magnitude 6.4–6.6 earthquakes. The analysis of the 60-m DEM shows a difference in fault patterns between Western and Northern Attica, which is related to crustal rheology variations.