东天山觉罗塔格地区夹白山一带晚古生代构造格局及演化

研究区早石炭世经历了中天山古陆北缘被动陆缘向活动陆缘沟弧盆体系演化的全过程.阿齐山-雅满苏岛弧带于维宪期发育在广宽陆棚海之上.岛弧为大型背形结构,雅满苏断裂带为火山喷发的主要通道,弧前盆地生成于弧沟间隙部位.晚石炭世早期,弧后区发生扩张作用而塌陷形成向形的边缘盆地.晚石炭世末,北侧康古尔洋区以弧弧对接方式关闭,弧区伴有深成花岗岩浆侵位.早二叠世早期进入松弛阶段,在弧间及弧后南缘产生上叠断陷盆地.晚二叠世右旋走滑变动席卷全区,最后大型造山带与地块之间发生块体右旋滑移错位,由此奠定了现今的盆山构造格局初貌.     

Cenozoic volcanic rocks in the Belog Co area, Qiangtang, northern Tibet, China： Petrochemical evidence for partial melting of the mantle-crust transition zone

Neogene volcanic rocks in the Belog Co area, Qiangtang, northern Tibet, are represented by a typical intermediate-basic and intermediate alkaline rock association, with latite-trachyte as the main rock type. The results of chemical analysis are: SiO2=52%–62%, Al2O3>15%, Na2O/K2O>1 and MgO<3.30%. In addition, the volcanic rocks are LREE-enriched with LREE/HREE=10–13, (La/Yb)N=15–19, and show a weak negative Eu anomaly with δEu=0.71–0.89. The close relationship between Mg# and SiO2 and the co-variation of the magmatophile elements and ultra-magmatophile elements such as La/Sm-La and Cr-Tb indicate that this association of volcanic rocks is the product of comagmatic fractional crystallization. The rock association type and lower Sm/Yb values (Sm/Yb=3.23–3.97) imply that this association of volcanic rocks should have originated from partial melting of spinel lherzolite in the lithospheric mantle. On the other hand, the weak negative Eu anomaly and relative depletion in Nb, Ta and Ti reflect the features of terrigenous magma. So the Neogene Belog Co alkaline volcanic rocks should be the result of partial melting of the special crust-mantle transition zone on the Qinghai-Tibet Plateau.     

青藏高原狮泉河-康西瓦地区 1:100万区域重力调查成果

利用最新取得的区域重力资料,参考航磁、遥感、区域地质资料,对青藏高原狮泉河-康西瓦地区重力场分区、断裂构造体系、构造单元、局部异常、深部构造、成矿远景区(带)等进行了研究.对阿尔金走滑断裂西南端的走向和延伸提出了一些新的看法;讨论了2条重力低值带的成因;推断了班公湖-怒江结合带下部莫霍面隆起的高度,从重力角度提出了对班公湖-怒江结合带的认识;认为青藏块体在拼合后地壳有2个加厚中心;新圈定了一个中、新生代沉积盆地,并进行了初步研究;结合地质、矿产、航磁等资料,初步划分出4个成矿远景区(带).     

西昆仑山前冲断带晚新生代构造地貌特征

在卫片解译、DEM数据处理、地形图分析与剖面制作的基础上,结合野外构造地貌考察与观测,对西昆仑山前冲断带的构造地貌特征进行了定量、半定量的研究。沿山前发育系统的水系变化、冲积扇变化、不对称背斜、大规模正断裂、不对称河流阶地等典型的构造地貌,表明这条由南向北逆冲的冲断带在扩展过程中存在着由西向东迁移的特征。冲断带的东西分段以桑株河为界,以西发育固满背斜,其构造样式为向北的逆冲伴随向南的反冲;以东发育一系列不对称的背斜,表现出明显的由南向北逆冲的特征,地表无明显的反冲构造出现。利用生长地层和河流阶地估算了西昆仑山的隆升速率:晚上新世—早更新世以来的最低隆升速率为0.21～0.25mm/a,100ka以来的隆升速率为1.5mm/a。     

Prime controls on Archaean–Palaeoproterozoic sedimentation: Change over time

Although the principle of uniformitarianism may be applied to the Precambrian sedimentary record as a whole, certain periods of the Archaean and Palaeoproterozoic witnessed a changing pattern of prime influences controlling the depositional systems. This paper examines the major controls on sedimentation systems and environments during the Archaean and Palaeoproterozoic within the broader perspective of Earth evolution. Earth's earliest sedimentary system (4.4?-3.7 Ga) was presumably comprised of deep oceanic realms and probably influenced primarily by bolide impacts, major tsunamis, localized traction and global contour current patterns, and bathymetry. As continental crust began to form, the impact-dominated, tsunami type sedimentation gave way to wider varieties of sedimentary environments, known from the oldest sedimentary records. During early continental crustal evolution (c. 3.7–2.7 Ga), sedimentation was essentially of greenstone-type. Volcanic and volcaniclastic rocks were the major components of the greenstone belts, associated with thin carbonates, stromatolitic evaporites, BIF, pelites and quartzites and lesser synorogenic turbidites, conglomerates and sandstones. Volcanism and active tectonism (reflecting dynamic depositional settings during island arc and proto-continental nucleus formation) were the predominant factors influencing sedimentation during this phase of Earth evolution. Transgressions and regressions under the combined influence of tectonics and eustasy are reflected in fining- and coarsening-upwards successions from the proto-cratonic settings; low freeboard enabled the transgression to affect large areas of the proto-cratons. As the earliest, relatively stable craton formed, through a combination of plate tectonic and mantle-thermal processes, continents and supercontinents with the potential for supercontinental cycles started to influence sedimentation strongly. Major controls on Neoarchaean–Palaeoproterozoic sedimentation systems (2.7–1.6 Ga) were provided by a combination of superplume events and plate tectonics. Two global-scale ‘superevents’ at c. 2.7 Ga and c. 2.2–1.8 Ga were accompanied by eustatic rise concomitant with peaks in crustal growth rates, and large epeiric seas developed. The operation of first-order controls leading to development of vast chemical sedimentary platforms in these epeiric seas and concomitant palaeo-atmospheric and palaeo-oceanic evolution combined to provide a second-order control on global sedimentary systems in the Neoarchaean–Palaeoproterozoic period. The supercontinental cycle had become well established by the end of the Palaeoproterozoic, with the existence of large cratons across broad spectrums of palaeolatitude enabling erg development. The entire spectrum of sedimentary systems and environments came into existence by c. 1.8 Ga, prime influences on sedimentation and depositional system possibly remaining essentially uniform thereafter.     

A 48-kyr-long slip rate history for the Jordan Valley segment of the Dead Sea Fault

We investigate the late Quaternary active deformation along the Jordan Valley segment of the left-lateral Dead Sea Fault and provide new insights on the behaviour of major continental faults. The 110-km-long fault segment shows systematic offsets of drainage systems surveyed at three sites along its southern section. The isotopic dating of six paleoclimatic events yields a precise chronology for the onset of six generations of gully incisions at 47.5 ka BP, 37.5 ka BP, 13 ka BP, 9 ka BP, 7 ka BP, and 5 ka BP. Additionally, detailed mapping and reconstructions provide cumulative displacements for 20 dated incisions along the fault trace. The individual amounts of cumulative slip consistently fall into six distinct classes. This yields: i) an average constant slip rate of 4.7 to 5.1 mm/yr for the last 47.5 kyr and ii) a variable slip rate ranging from 3.5 mm/yr to 11 mm/yr over 2-kyr- to 24-kyr-long intervals. Taking into account that the last large earthquake occurred in AD 1033, we infer 3.5 to 5 m of present-day slip deficit which corresponds to a Mw  7.4 earthquake along the Jordan Valley fault segment. The timing of cumulative offsets reveals slip rate variations critical to our understanding of the slip deficit and seismic cycle along major continental faults.     

川西前陆盆地南部莲花山区地震剖面构造解释及构造特征研究

通过详细的地震剖面解释,结合川西前陆盆地演化史,阐明莲花山地区地下断层及褶皱的几何形态及特征。认为区内部分断层是继承先成断层发育而来,部分断层是喜马拉雅期运动的产物;部分断层存在断层反转现象;控制盆地内沉积的主要因素是几个大断层。     

东昆仑南部晚新生代逆冲推覆构造系统

通过对东大滩—东温泉地区的路线地质观测与构造填图,在东昆仑南部发现晚新生代大型逆冲推覆构造系统。沿低角度逆冲断层,早二叠世大理岩和早三叠世砂板岩自北向南逆冲推覆于古新统—始新统风火山群紫红色砾岩和渐新世砖红色砂砾岩之上,形成大量不同规模的飞来峰;沿主逆冲断层发育厚层断层角砾岩与断层泥,局部形成碳酸盐质糜棱岩。东昆仑南部逆冲推覆构造的发育时代为渐新世晚期—中新世早期,主要形成、活动时期为26～13.5Ma;估算最小逆冲推覆距离为30～35km,最小逆冲推覆运动速率为2.4～2.8mm/a。东昆仑南部晚新生代逆冲推覆构造运动与现今山脉快速隆升存在着动力学成因联系。     

构造强烈改造型盆地——来自杉松岗盆地的证据

通过对杉松岗盆地构造变形的研究与分析,总结并提出构造强烈改造型盆地的概念。构造强烈改造型盆地主要特征表现为盆地的原生状态遭到毁灭性的破坏,盆地的现存岩貌是构造改造的结果而非原始的有序堆积;各种构造岩和构造煤的广泛发育是构造强烈改造型盆地的重要物质记录;混杂堆积构成的宏观有序、微观无序的叠堆构造是构造强烈改造型盆地的主要控煤构造。     

青藏高原新生代火车头山碱性及钙碱性两套火山岩的地球化学特征及其物源讨论

藏北羌塘火车头山新生代火山岩可区分为钙碱性及碱性两个不同的系列。钙碱性火山岩主要岩石组合为玄武岩-安山岩-英安岩,其SiO_2介于49%～70%之间,Al_2O_3>10%,Na_2O/K_2O>1;其中玄武岩具平坦型稀土配分型式,LREE/HREE为1.3～1.8,(La/Yb)_N为2.87～4.45,无明显铕异常,δEu为0.96～1.09;该套岩石的Mg~#与SiO_2相关关系以及La/sm-La等亲岩浆元素与超亲岩浆元素协变关系表明,它们应为幔源岩浆经分离结晶演化的产物,其岩石组合类型以及低的Sm/Yb值(Sm/Yb=1.53～5.35)表明它们的原始岩浆应来源于岩石圈地幔尖晶石二辉橄榄岩的局部熔融。本区碱性火山岩为一套典型的钾质岩石系列,主要岩石组合类型为碱玄岩-碱玄质响岩-响岩,其SiO_2介于44%～59%之间,Al_2O_3>14%,Na_2O/K_2O介于0.47～1.51之间;岩石轻稀土强烈富集,LREE/HREE为13.20～15.76,(La/Yb)_N=50.44～91.99;其岩石组合类型以及Mg~#与SiO_2相关关系以及La/Sm-La协变关系同样表明它们为共源岩浆分离结晶演化的产物;然而,其较高的Sm/Yb值(Sm/ Yb=2.63～13.98)表明它们并非地幔橄榄岩直接局部熔融的产物,岩石弱的负Eu异常(δEu=0.77～0.85)以及Th、U的强烈富集和Nb、Ta的相对亏损,又反映了原始岩浆中有显著的地壳物质的贡献;该套钾质碱性系列岩石在La/Co-Th/Co同分母协变图上呈直线型分布,而在La/Co-Sc/Th异分母协变图上呈显著的双曲线分布,从而表明其源区为二源混合型,是青藏高原特殊的壳幔混合层局部熔融的产物,这些特征是新生代青藏高原壳幔层圈物质交换的重要岩石学证据。