Architecture of coastal and alluvial deposits in an extensional basin: the Carboniferous Joggins Formation of eastern Canada

Abstract The Joggins Formation was deposited in the Cumberland Basin, which experienced rapid mid‐Carboniferous subsidence on bounding faults. A 600 m measured section of coastal and alluvial plain strata comprises cycles tens to hundreds of metres thick. The cycles commence with coal and fossiliferous limestone/siltstone intervals, interpreted as widespread flooding events. These intervals are overlain by coarsening‐upward successions capped by planar‐based sandstone mounds, up to 100 m in width that represent the progradation of small, river‐generated delta lobes into a standing body of open water developed during transgression. The overlying strata contain sand‐rich heterolithic packages, 1–8 m thick, that are associated with channel bodies 2–3 m thick and 10–50 m wide. Drifted plant debris, Calamites groves and erect lycopsid trees are preserved within these predominantly green‐grey heterolithic sediments, which were deposited on a coastal wetland or deltaic plain traversed by channel systems. The cycles conclude with red siltstones, containing calcareous nodules, that are interbedded with thin sandstones and associated with both single‐storey channel bodies (1–1·5 m thick and 2–3 m wide) and larger, multistorey channels (3–6 m thick) with incised margins. Numerous channel bodies at the same level suggest that multiple‐channel, anastomosed river systems were developed on a well‐drained floodplain. Many minor flooding surfaces divide the strata into parasequences with dominantly progradational and aggradational stacking patterns. Multistorey channel bodies are relatively thin, fine grained and modestly incised, and palaeosols are immature and cumulative. The abundance and prominence of flooding surfaces suggests that base‐level rise was enhanced, whereas the lack of evidence for abrupt basinward stepping of facies belts, coupled with the absence of strong fluvial incision and mature palaeosols, suggests that base‐level fall was suppressed. These architectural features are considered to reflect a tectonic architectural signature, in accordance with the high‐subsidence basinal setting. Evidence for restricted marine influence and variation in floral assemblages suggests modulation by eustatic and climatic effects, although their relative importance is uncertain.     

黑龙江省未来30、50年气候预测

通过CCCma、CCSR、CSIRO、Gfdl和Hadley气候模式对黑龙江省其中包括齐齐哈尔、佳木斯、哈尔滨、牡丹江等4区未来50年(2005～2050年)，在GG、GS情景下数值模拟。结果表明(采用GS结果)，未来2030、2050年气温均有较大增高。其中2030年年平均气温可增高1．94℃；春季提高2．06℃：；夏季提高1．29℃；秋季提高1．79℃；冬季提高2．66℃，2050年又继续增加．年平均气温将提高2．42℃；春季提高2．13℃；夏季提高1．68℃；秋季提高2．56℃；冬季提高3．21℃。冬季是四季中增幅最大的季节，其次秋季、春季和夏季。如果按GG情景下，未来气温还要高出1℃。增温中心在西部齐齐哈尔，增温较小为牡丹江。从哈尔滨年蒸发量来看，2030年可增加11％，2050年可增加13％。     

酒店气象专用电视频道技术方案

阐述了酒店气象专用电视频道的工作原理,同时还推荐了本系统软硬件具体的配置,最后对专用系统软件的工作流程及其使用方法进行了详细的说明。     

黄海、东海海域出海气旋发展过程中尺度数值模拟

利用MM5中尺度模式对1999年6月两个出海气旋发展过程进行 数值模拟. 数值模拟的气旋出海后移动路径与实际情况基本一致. 在数值模拟基础上重点讨 论了出海气旋发展过程潜热通量和感热通量的分布及其演变情况. 气旋出海后在气旋中心区 南方和东方存在负潜热通量和感热通量区. 出海气旋的东移和发展，其前方强大正热通量区 的存在可能是重要原因之一.     

利用数字图像处理技术提高地震剖面图像信噪比

提出了利用数字图像处理技术提高地震剖面信噪比的新方法，首先根据数字图像处理要求的格式，对地震剖面数据进行转换，得到地震剖面图像，分析了地震数据特点和初步地震图像的实验结果后，设计了新的预处理方法——“二维沿层滤波”，在此基础上，利用可以计算帧间运动速度及其变化都较大的改进的光流分析技术，计算出多幅地震剖面对应点的偏移量，然后应用图像积累技术对这多幅地震剖面进行积累，实现对三维地震数据体提高信噪比的处理，该方法充分利用了三维地震信息，不但可以提高整个数据体的信噪比，而且可以减少信号能量的损失，并保持原来的信号能量关系，使地震剖面的质量得到明显提高，为地震解释奠定良好的基础。     

采用基础摩擦隔震房屋高宽比限值的研究

大量的试验结果和地震经验表明，采用基础隔震方法能有效地提高建筑物的抗震能力，但建筑物的高度在什么范围，即建筑物的高宽比在什么范围内才适合采用这种方法，仍然是一个有待解决的课题。本文对采用基础滑移隔震多层砌体房屋在实际地震作用下的抗倾覆高宽比限值进行了研究，利用Ｗｉｌｓｏｎ－θ数值积分方法计算，得到了多层砌体房屋的高宽比限值的统计值。其数值结果可供编制建筑隔震设计规程参考。     

湘鄂赣二叠纪沉积盆地与层序地层

湘鄂赣二叠纪沉积盆地是在统一的陆愉－－华南陆块基础上发展而来的，根据晚古生代以来的地壳活动情况、沉积物充填序列、沉积相带及空间配置，该区可以划分为四种沉积盆地，即扬子克拉通盆地、扬子克拉通缘被动大陆边缘盆地、湘赣板内拉张盆地和华夏克拉能边缘盆地。由于没沉积盆地中层序发展的主控因素及上关效应的差异，从而决定了层序发育特点的差异，本文详细划分了各种沉积层序和沉积体系域，并进行了区域对比。在此基础上，探     

湘鄂赣二叠纪岩相古地理研究

湘鄂赣二叠纪沉积盆地是在华南陆块基础上发育而成，具有扬子克拉通北缘被动大陆边缘盆地，扬子克拉通盆地，湘赣板内拉张盆地和华夏克拉通边缘盆地等四类。根据古暴露等标志，建立了各类盆地的沉积层序，并进行了区域对比。     

Striking liptinitic bark remains peculiar to some Late Permian Chinese coals

An unusual liptinite coal component has been reported in the Chinese literature over the past sixty years. It has been described as a maceral in the Chinese National Standard (1991), but it has not been named internationally. In Chinese literature it is called “barkinite”, on the basis of its morphological features and because it is believed to have originated as bark tissue.“Barkinite” occurs in Late Permian, marine-influenced coals and is best represented in the Changguang, Leping and Shuicheng Basins of southern China.The material originates from plant periderm or the bark of higher plants. However, “bark” contains a variety of substances, including resin and suberin, which are recognised as the precursors of the resinite and suberinite macerals. “Barkinite” is distinguished by (i) its thickness; individual pieces can be more than ten cells thick and several centimetres long and (ii) it fluoresces strongly at 0.6% vitrinite reflectance and loses its fluorescence at about 1.1% vitrinite reflectance.The reporting of “barkinite” from only Chinese coals may be due to its origin from Lepidodendron and Psaronius flora, which was common in the Northern Hemisphere during the Carboniferous, but which was isolated to China by the Late Permian. It is proposed that the remnant flora evolved into unique forms in China by the Late Permian. Lepidodendron and Psaronius remains, coupled with a strongly marine-influenced, peat-forming environment have given rise to “barkinite” and to its restricted distribution.     

燕山地区印支期构造相研究

本文简单回顾了构造相的研究概况，分析了构造相的控制因素；笔者从岩石的能干性出发，提出了地层能干性的新概念，计算了燕山地区前中生代各地层的能干性和印支期变形的温压条件，并对燕山地区印支期构造相进行了系统的划发，建立了印支期的相结构。提出了本区印支期构造相以变流相为主的观点。