黄龙铺钼矿田含矿碳酸岩地球化学特征及其形成构造背景

陕西黄龙铺钼矿田是东秦岭钼矿带中成矿类型最为独特的矿床,多数矿体产于晚三叠纪（220Ma）的碳酸岩岩脉内。其中,石家湾Ⅱ号矿体碳酸岩的Sr和REE含量异常高,δ¹³C_PDB为 -6.75‰~ -6.92‰,δ¹⁸O_SMOWO为8.69‰~9.48‰,显示典型的火成碳酸岩的特征。在世界范围内,碳酸岩来自地幔低程度部分熔融或交代作用,稀土配分模式为陡倾斜的轻稀土富集型,但石家湾碳酸岩HREE含量异常高,稀土配分模式平坦,不同于世界其它地区的碳酸岩,这要求源区必须相对亏损LREE,相对富集HREE。显然,如此源区与俯冲洋壳部分熔融之后的残留相榴辉岩的特征一致。因此,我们认为,勉略洋壳在三叠纪向北俯冲至秦岭-华北联合陆块之下,通过变质脱水熔融而形成岩浆弧,随后,在弧后扩张带发生残余榴辉岩的低程度部分熔融或交代而形成碳酸岩岩浆,导致黄龙铺矿田形成。如此以来,秦岭地区在220Ma左右仍有B型俯冲作用,碰撞造山作用并没有结束。     

东昆仑小庙基性岩脉地球化学及LA-ICP-MS锆石U-Pb定年

东昆仑小庙辉绿岩脉侵位于前寒武纪金水口群变质基底中,岩石地球化学研究表明:它是以低TiO₂和较低的MgO,Nb、Ta亏损和Th富集为特征,贫P₂O₅,Na₂O＞K₂O, 富集大离子亲石元素Rb、Ba、Th、U、Sr和LREE,高场强元素分异明显,地壳源区对辉绿岩的影响很大,形成于大陆拉张带或裂谷初期环境。LA-ICP-MS锆石U-Pb同位素定年结果表明:1 996~2 428 Ma年龄可能代表岩浆捕获锆石年龄,形成于太古宙至古元古代的区域性构造热事件;3个较一致点的加权平均年龄（733.6±6.6） Ma（MSWD =0.038）为辉绿岩结晶年龄,可能代表了新元古代东昆仑地区裂解的时间,这与Rodinia超大陆裂解相对应。     

白云鄂博碳酸岩墙的稀土和微量元素地球化学及对其成因的启示

根据矿物组成白云鄂博矿区的碳酸岩岩可墙可分为白云石型、白云石－方解石共存型和方解石型三种类型。REE和微量元素地球化学表明，这三类碳酸岩岩墙为碳酸岩浆演化不同阶段的产物，白云石型和白云石－方解石共存型对应于早期岩浆阶段，其（La/Nd)n、(La/Yb)n比值随稀土总量的增加而增大，方解石型则对应于碳酸岩浆演化的晚期热液阶段，其稀土总量明显富集，但其（La/Nd)n、(La/Y)n和（La/Yb)n比值随稀土总量的增加却有减小的趋势，热液阶段也是白云鄂博稀土矿化的主要阶段。     

西藏改则县多龙矿集区发现岩墙岭蛇绿岩残片

西藏班公湖-怒江缝合带北缘多龙矿集区是青藏高原新近发现的具有超大型远景的、典型的富金斑岩型铜矿集区,其成岩成矿地质背景是解决班公湖-怒江洋构造演化的关键问题之一。近年来的区域地质调查研究发现,多龙矿集区南侧出露岩墙岭蛇绿岩残片,应该是班公湖-怒江蛇绿岩带的重要组成部分。岩墙岭蛇绿岩主要由席状岩墙群、枕状玄武岩和硅质岩组成,整体呈棱形或透镜体状断续分布于侏罗系复理石沉积内,构成典型的网结状构造。糜棱岩普遍发育在岩墙岭蛇绿岩和围岩的接触部位。综合前人研究成果,初步认为多龙矿集区早白垩世成岩成矿作用应该形成于增生楔之上伸展拉张的构造环境。岩墙岭蛇绿岩的发现和确定进一步约束了多龙矿集区成岩成矿地质背景,同时为班公湖-怒江缝合带的延伸及其构造演化的研究提供了新的线索。     

Crustal contamination and fluid/rock interaction in the carbonatites of Fuerteventura (Canary Islands, Spain): a C, O, H isotope study

Fuerteventura—the second largest of the Canary Islands consists of Mesozoic sediments, submarine volcanic rocks, dike swarms and plutons of the Basal Complex, and younger subaerial basaltic and trachytic series. Carbonatites are found in two Basal Complex exposures: the Betancuria Massif in the central part of the island and the Esquinzo area in the north. values of the carbonatites increase progressively from south to north of the island. This phenomenon is attributed to different degrees of assimilation of sedimentary carbonate. Homogeneous, typically magmatic values for carbonatites which have preserved primary igneous textures and minerals suggest a well-mixed reservoir where changes in values result from the storage of carbonate magmas at different structural levels. The magma storage allowed assimilation of sediment to varying degrees before final emplacement of carbonatites. Shifts in towards more positive and negative values from presumed primary compositions are observed in the carbonatites. On the basis of the oxygen isotope compositions of calcite, mica and K-feldspar, and the hydrogen isotope compositions of micas, the changes in the values of the carbonatites can be related to fluid/rock interactions.     

Geochronology and mineralogy of the Weishan carbonatite in Shandong province,eastern China

The Weishan REE deposit is located at the eastern part of North China Craton (NCC), western Shandong Province. The REE-bearing carbonatite occur as veins associated with aegirine syenite. LA-ICP-MS bastnaesite Th-Pb ages (129 Ma) of the Weishan carbonatite show that the carbonatite formed contemporary with the aegirine syenite. Based on the petrographic and geochemical characteristics of calcite, the REE-bearing carbonatite mainly consists of Generation-1 igneous calcite (G-1 calcite) with a small amount of Generation-2 hydrothermal calcite (G-2 calcite). Furthermore, the Weishan apatite is characterized by high Sr, LREE and low Y contents, and the carbonatite is rich in Sr, Ba and LREE contents. The δ¹³C_V-PDB (−6.5‰ to −7.9‰) and δ¹³O_V-SMOW (8.48‰–9.67‰) values are similar to those of primary, mantle-derived carbonatites. The above research supports that the carbonatite of the Weishan REE deposit is igneous carbonatite. Besides, the high Sr/Y, Th/U, Sr and Ba of the apatite indicate that the magma source of the Weishan REE deposit was enriched lithospheric mantle, which have suffered the fluid metasomatism. Taken together with the Mesozoic tectono-magmatic activities, the NW and NWW subduction of Izanagi plate along with lithosphere delamination and thinning of the North China plate support the formation of the Weishan REE deposit. Accordingly, the mineralization model of the Weishan REE deposit was concluded: The spatial-temporal relationships coupled with rare and trace element characteristics for both carbonatite and syenite suggest that the carbonatite melt was separated from the CO₂-rich silicate melt by liquid immiscibility. The G-1 calcites were crystallized from the carbonatite melt, which made the residual melt rich in rare earth elements. Due to the common origin of G-1 and G-2 calcites, the REE-rich magmatic hydrothermal was subsequently separated from the melt. After that, large numbers of rare earth minerals were produced from the magmatic hydrothermal stage.     

Soft‐sediment deformation structures in a Pleistocene glaciolacustrine delta and their implications for the recognition of subenvironments in delta deposits

The development of soft‐sediment deformation structures in clastic sediments is now reasonably well‐understood but their development in various deltaic subenvironments is not. A sedimentological analysis of a Pleistocene (ca 13·1 to 15 ¹⁰Be ka) Gilbert‐type glaciolacustine delta with gravity‐induced slides and slumps in the Mosty‐Danowo tunnel valley (north‐western Poland) provides more insight, because the various soft‐sediment deformation structures in these deposits were considered in the context of their specific deltaic subenvironment. The sediments show three main groups of soft‐sediment deformation structures in layers between undeformed sediments. The first group consists of deformed cross‐bedding (inclined, overturned, recumbent, complex and sheath folds), large‐scale folds (recumbent and sheath folds) and pillows forming plastic deformations. The second group comprises pillar structures (isolated and stress), clastic dykes with sand volcanoes and clastic megadykes as examples of water‐escape structures. The third group consists of faults (normal and reverse) and extensional fissures (small fissures and neptunian dykes). Some of the deformations developed shortly after deposition of the deformed sediment, other structures developed later. This development must be ascribed to hydroplastic movement in a quasi‐solid state, and due to fluidization and liquefaction of the rapidly deposited, water‐saturated deltaic sediments. The various types of deformations were triggered by: (i) a high sedimentation rate; (ii) erosion (by wave action or meltwater currents); and (iii) ice‐sheet loading and seasonal changes in the ablation rate. Analysis of these triggers, in combination with the deformational mechanisms, have resulted – on the basis of the spatial distribution of the various types of soft‐sediment deformation structures in the delta under study – in a model for the development of soft‐sediment deformation structures in the topsets, foresets and bottomsets of deltas. This analysis not only increases the understanding of the deformation processes in both modern and ancient deltaic settings but also helps to distinguish between the various subenvironments in ancient deltaic deposits.     

大同地区早中生代煌斑岩—碳酸岩岩墙群

大同地区密集分布的岩墙群由基性－超基性煌斑岩和碳酸岩组成,侵入石炭－二叠纪煤层中。与地层的接触关系和Rb-Sr,K-Ar同位素年代学数据表明墙群的侵位于晚三叠世。Sr,Nd同位素比值显示,碳酸岩和煌斑岩都来源于壳幔混合型岩浆源区。稳定元素比值和相容,不相容元素同等富集则表明是碳酸岩和硅酸盐混合的原始母岩浆液态不混熔的产物。 岩墙群形成的地质条件和构造背景表明,它们是在伸展构造背景下,受到不同级别的构造控制,大同岩墙群的研究对进一步认识华北早中生代岩石圈演化有重要的意义。     

Phreatomagmatic boulder conglomerates at the tip of the ca 2772 Ma Black Range dolerite dyke,Pilbara Craton,Western Australia

Unusual volcanic conglomerates with a mixture of well-rounded granitic boulders (to 1.2 m diameter) derived from adjacent basement rocks, and smaller (1 – 10 cm) subspherical basaltic droplets with chilled margins occupy a linear zone along strike of the northern end of the Late Archaean Black Range dolerite dyke in the Pilbara Craton, Western Australia. The matrix of the volcanic conglomerates becomes more angular with decreasing grainsize and grades to rock flour, a trend opposite to that in sedimentary conglomerates. In other places, the matrix consists of chlorite that cuts through, and resorbs, granitic clasts, indicating an origin as volcanic melt. The volcanic conglomerates have peperitic contacts with immediately adjacent flows of the Mt Roe Basalt of the Fortescue Group. A welded volcanic tuff at the peperitic contact is dated at 2767 ± 3 Ma, within error of the 2772 ± 2 Ma Black Range dolerite dyke and the Mt Roe Basalt (2775 ± 10 Ma), confirming the contemporaneity of formation of these geological elements. Subsequent normal faulting has juxtaposed the higher level conglomerates down into their present exposure level along strike of the Black Range dolerite dyke. The linear zone of volcanic conglomerates is interpreted to represent a phreatomagmatic pebble dyke that formed immediately above, and as a result of intrusion of, the Black Range dolerite dyke. Interaction of magma with groundwater caused phreatomagmatic brecciation of the country rock, in situ milling of granitic boulders, incorporation of basaltic melt droplets, and the formation of a mixed matrix of devitrified volcanic glass and granitic material. This process was accompanied by along-strike epithermal Cu – Hg – Au mineralisation.     

Carbonatites in a subduction system: The Pleistocene alvikites from Mt. Vulture (southern Italy)

We report here, for the first time, on the new finding of extrusive calciocarbonatite (alvikite) rocks from the Pleistocene Mt. Vulture volcano (southern Italy). These volcanic rocks, which represent an outstanding occurrence in the wider scenario of the Italian potassic magmatism, form lavas, pyroclastic deposits, and feeder dikes exposed on the northern slope of the volcano. The petrography, mineralogy and whole-rock chemistry attest the genuine carbonatitic nature of these rocks, that are characterized by high to very high contents of Sr, Ba, U, LREE, Nb, P, F, Th, high Nb/Ta and LREE/HREE ratios, and low contents of Ti, Zr, K, Rb, Na and Cs. The O–C isotope compositions are close to the “primary igneous carbonatite” field and, thus, are compatible with an ultimate mantle origin for these rocks. The Sr–Nd–Pb–B isotope compositions, measured both in the alvikites and in the silicate volcanic rocks, indicate a close genetic relationship between the alvikites and the associated melilitite/nephelinite rocks. Furthermore, these latter products are geochemically distinct from the main foiditic-phonolitic association of Mt. Vulture. We propose a petrogenetic/geodynamic interpretation which has important implications for understanding the relationships between carbonatites and orogenic activity. In particular, we propose that the studied alvikites are generated through liquid unmixing at crustal levels, starting from nephelinitic or melilititic parent liquids. These latter were produced in a hybrid mantle resulting from the interaction through a vertical slab window, between a metasomatized mantle wedge, moving eastward from the Tyrrhenian/Campanian region, and the local Adriatic mantle. The occurrence of carbonatite rocks at Mt. Vulture, that lies on the leading edge of the Southern Apennines accretionary prism, is taken as an evidence for the carbonatation of the mantle sources of this volcano. We speculate that mantle carbonatation is related to the introduction of sedimentary carbon from the Adriatic lithosphere during Tertiary subduction.