Spatial pattern formation of a ratio-dependent predator—prey model

This paper presents a theoretical analysis of evolutionary process that involves organisms distribution and their interaction of spatially distributed population with diffusion in a Holling-III ratio-dependent predator--prey model, the sufficient conditions for diffusion-driven instability with Neumann boundary conditions are obtained. Furthermore, it presents novel numerical evidence of time evolution of patterns controlled by diffusion in the model, and finds that the model dynamics exhibits complex pattern replication, and the pattern formation depends on the choice of the initial conditions. The ideas in this paper may provide a better understanding of the pattern formation in ecosystems.     

Formation and stability of mixed Mg/Ca/phytate species in synthetic seawater media: Consequences on ligand speciation

The results of a potentiometric investigation (by ISE-H⁺, glass electrode) on the speciation of phytate ion (Phy¹²⁻) in an ionic medium simulating the major components (Na⁺, K⁺, Ca²⁺, Mg²⁺, Cl⁻ and SO₄²⁻) of natural seawater, at different salinities and t = 25 °C, are reported. The work was particularly aimed at determining the possible formation of mixed Ca²⁺–Mg²⁺–phytate ion pairs, and to establish how including the formation of these mixed species would affect the speciation modeling in seawater media. After testing various speciation models, that considering the formation of the MgCaH₃Phy⁵⁻, MgCaH₄Phy⁴⁻, Mg₂CaH₃Phy³⁻ and Mg₂CaH₄Phy²⁻ species was accepted, and corresponding stability constants were determined at two salinities (S = 5, 10). A discussion is reported both on the choice of the experimental conditions and on the possibility to extend these results to those typical of real seawater. A detailed procedure is also described to demonstrate that the stability of these species is higher than that statistically predicted. As reported in literature, a parameter, namely log X, has been determined in order to quantify this extra stability for the formation of each mixed species at various salinities. For example, at S = 10, log X₁₁₃ = 2.67 and log X₁₁₄ = 1.37 for MgCaH₃Phy⁵⁻ and MgCaH₄Phy⁴⁻ (statistical value is log X_stat = 0.60), and log X₂₁₃ = 6.11 and log X₂₁₄ = 2.15 for Mg₂CaH₃Phy³⁻ and Mg₂CaH₄Phy²⁻ (log X_stat = 1.43), respectively. Results obtained also showed that the formation of these species may occur even in conditions of low salinity (i.e. low concentration of alkaline earth cations) and low pH (i.e., more protonated ligand).     

Formation of saddle dolomites in Upper Cambrian carbonates, western Tarim Basin (northwest China): Implications for fault-related fluid flow

The saddle dolomites occur more intensely in cores closely to fault than that in cores far away from the fault in Upper Cambrian carbonate of western Tarim basin, suggesting that formation of the saddle dolomites is likely related to fault-controlled fluid flow. They partially fill in fractures and vugs of replacement dolomite. The saddle dolomites exhibit complex internal textures, commonly consisting of core and cortex. In comparison with the matrix dolomites, the saddle dolomites show lower Sr-content and ⁸⁷Sr/⁸⁶Sr ratios, higher Fe- and Mn-content, and more negative δ¹⁸O values. Combined with high Th (100–130 °C) of primary fluid inclusions, it is suggested that the saddle dolomites precipitated from hydrothermal fluid derived from the deep evaporite-bearing Middle Cambrian strata, and the magnesium source may be due to dissolution of host dolomite during hydrothermal fluid migration. Fault activity resulted in petrographic and geochemical difference of the core and cortex of the saddle dolomites. The cores precipitated from the formation water mixed by deep brines at the early stage of fault activity, and the cortexes precipitated from the deep fluid with higher temperatures through the Middle Cambrian later. In summary, the formation of the saddle dolomites implies a hydrothermal fluid event related to fault activity, which also resulted in high porosity in Upper Cambrian carbonate in western Tarim Basin.     

High-resolution record of tectonic and sedimentary processes in growth strata

Growth strata are used to determine the kinematics of synsedimentary structures such as faults. Classical methods of analysis such as thickness versus throw plot consider that the available space created by fault slip in the hanging wall of faults is instantaneously filled up by sediments. This has lead many previous works to identify a cyclic activity for growth faults. Here we perform a careful analysis of the variation of strata thicknesses on each side of a very well documented normal growth fault in the Niger delta. We show that these thickness variations are induced by the alternation of sedimentary processes during continuous fault slip. Suspended-load processes induce either uniform or slightly variable thickness of a large majority of mudstone layers. Bedload processes result in a preferential thickening of sand layers in the hanging wall. These high quality data thus provide strong grounds for doubting the polycyclic growth diagnosed for some faults at the scale of sedimentary cycles and supports the notion that fault displacement rates can be very well behaved. Our study emphasizes the important conclusion that stable fault growth, and related displacement rates, can appear to be punctuated when viewed at the scale of sedimentary cycles. It follows that care should be taken when attempting to derive displacement rates on temporal scales equivalent to those of alternating sedimentological cycles.     

Three-dimensional inversion of marine magnetic anomalies: Implications for crustal accretion along the Mid-Atlantic Ridge (28°–31°30′ N)

We present magnetic field data collected over the Mid-Atlantic Ridge in the vicinity of the Atlantis Fracture Zone and extending out to 10 Ma-old lithosphere. We calculated a magnetization distribution which accounts for the observed magnetic field by performing a three-dimensional inversion in the presence of bathymetry. Our results show the well-developed pattern of magnetic reversals over our study area. We observe a sharp decay in magnetization from the axis out to older lithosphere and we attribute this decay to progressive low temperature oxidation of basalt. In crust which is 10 Ma, we observe an abrupt increase in magnetic field intensity which could be due to an increase in the intensity of magnetization or thickness of the magnetic source layer. We demonstrate that because the reversal epoch was of unusually long duration, a two-layer model comprised of a shallow extrusive layer and a deeper intrusive layer with sloping polarity boundaries can account for the increase in the amplitude of anomaly 5. South of the Atlantis Fracture Zone, high magnetization is correlated with bathymethic troughts at segment end points and lower magnetization is associated with bathymetric highs at segment midpoints. This pattern can be explained by a relative thinning of the magnetic source layer toward the midpoint of the segment. Thickening of the source layer at segment endpoints due to alteration of lower oceanic crust could also cause this pattern. Because we do not observe this pattern north of the fracture zone, we suggest it is a result of the nature of crustal formation process where mantle upwelling is focused. South of the fracture zone, reversals along discontinuity traces only continue to crust 2 Ma old. In crust >2 Ma, we observe bands of high, positive magnetization along discontinuity traces. We suggest that within the discontinuity traces, a high, induced component of magnetization is produced by serpentinized lower crust/upper mantle and this masks the contribution of basalts to the magnetic anomaly signal.     

蓬莱19-3油田西北斜坡带构造特征及控藏作用

为探索蓬莱19-3油田西北斜坡带的勘探潜力,根据邻区已钻井和精细的地震资料解释,采用断裂几何样式分析及构造恢复方法对蓬莱19-3油田西北斜坡带的断裂成因、构造演化及其控藏作用进行分析。结果显示：在平面上主要发育NE(NNE)向及NW(近EW)向断层,其走向、倾向及垂向上的搭接关系主要受区域应力及地层厚度等因素控制,在不同构造部位体现不同的特征。揭示了3个关键期区域构造应力在本区的叠加,即早白垩世(燕山期中期)的拉张,始新世晚期的右行走滑及上新世—第四纪新构造运动的拉张。早白垩世发育的基底先存断裂控制了古构造脊的形成,为本区油气横向输导提供必要条件,上新世—第四纪新构造运动发育的贯通式切脊断裂是油气的垂向运移的有利通道,其活动期是渤海重要的成藏期,预示本区具有良好的勘探潜力。     

Smectite formation in metalliferous sediments near the East Pacific Rise at 13°N

A 43 cm long E271 sediment core collected near the East Pacific Rise(EPR) at 13°N were studied to investigate the origin of smectite for understanding better the geochemical behavior of hydrothermal material after deposition.E271 sediments are typical metalliferous sediments. After removal of organic matter, carbonate, biogenic opal,and Fe-Mn oxide by a series of chemical procedures, clay minerals(2 μm) were investigated by X-ray diffraction,chemical analysis and Si isotope analysis. Due to the influence of seafloor hydrothermal activity and close to continent, the sources of clay minerals are complex. Illite, chlorite and kaolinite are suggested to be transported from either North or Central America by rivers or winds, but smectite is authigenic. It is enriched in iron, and its contents are highest in clay minerals. Data show that smectite is most likely formed by the reaction of hydrothermal Fe-oxyhydroxide with silica and seawater in metalliferous sediments. The Si that participates in this reaction may be derived from siliceous microfossils(diatoms or radiolarians), hydrothermal fluids, or detrital mineral phases. And their δ30 Si values are higher than those of authigenic smectites, which implies that a Si isotope fractionation occurs during the formation because of the selective absorption of light Si isotopes onto Feoxyhydroxides. Sm/Fe mass ratios(a proxy for overall REE/Fe ratio) in E271 clay minerals are lower than those in metalliferous sediments, as well as distal hydrothermal plume particles and terrigenous clay minerals. This result suggests that some REE are lost during the smectite formation, perhaps because their large ionic radii of REE scavenged by Fe-oxyhydroxides preclude substitution in either tetrahedral or octahedral lattice sites of this mineral structure, which decreases the value of metalliferous sediments as a potential resource for REE.     

南黄海海相地层速度的提取及其特征

南黄海盆地特殊的地震地质条件导致准确获得海相地层速度存在困难。基于本区的多道地震资料,联合使用多数据质控速度分析、初至波层析反演及层控网格层析反演3种方法,提取出了较为可靠的海相中-古生界速度信息。结合提取的地震速度及下扬子区已有钻井信息,总结了南黄海主要海相地层的速度分布。本区海相地层速度整体呈高低相间分布结构,存在速度的突变和倒转。海相下构造层速度高,不同地层间速度差异较小。由于海相下构造层无钻井资料约束,获得的速度信息仍存在不确定性。     

Bicyclic alkanes in source rocks of the Triassic Yanchang Formation in the Ordos Basin and their inconsistency in oil-source correlation

The Triassic Yanchang Formation is the main source rocks for Mesozoic oil in Ordos Basin. The formation includes 10 oil-bearing beds (Ch 1–Ch 10), that each can be further divided into two to three intervals. Abundant C₁₂–C₁₄ and C₁₅–C₁₆ bicyclic alkanes have been detected in the formation in the Xifeng oilfield, Ordos Basin. The C₁₂–C₁₄ group is dominated by C₁₂ and C₁₃, and the C₁₅–C₁₆ group contains abundant C₁₅. The groups show three distribution patterns: A) the C₁₂–C₁₄ group is the major component in the non-source rocks of the Ch 7-1 and Ch 8-1 intervals; B) both groups are abundant and are common in source rocks of the Ch 7-3 interval; and C) the C₁₅–C₁₆ group is the major component in source rocks of the Ch 7-3 interval and also in sediments that contain type Ⅰ or partial sapropel type Ⅱ₁ organic matter (OM) in the Ch 7-2 and Ch 8-1 intervals. Although thermal maturities of the source rocks in the Ch 7 section are similar, they show significant differences with respect to the drimane isomerisation index, which indicates that the drimane rearrangement is controlled by thermal evolution of the sediments, but may also be closely related to the depositional environment. This study determined that reducing environments are more conducive to preservation of drimane than oxic environments. The drimane isomerisation index and the value of the hopane parameter Tm/Ts are positively correlated. The parameter Tm/Ts varies over a wide range within the sequence, and the large variations may be a result of terrigenous OM input by turbidity currents and/or gravity flows, mixed with the autochthonous sediments. Abundant homodrimane in both source rocks may reflect reducing environments in deep lakes and major input of higher plant OM. Organic-rich shale and oil shale in the Ch 7-3 interval of the Yanchang Formation are the primary sources of oil in reservoirs in the Xifeng area. The crude oil is rich in bicyclic alkanes that are dominated by C₁₅–C₁₆ as source rocks with pattern C for bicyclic alkanes, which indicates an origin mainly from the Ch 7-3 interval. The main peaks in all of the crude oils are associated with 8β(H)-drimane and lower abundance of rearranged drimane. However, most of the source rocks have a main peak associated with 8β(H)-homodrimane or rearranged drimane. Weak microbial action, selective degradation and water washing may be the cause of the significant difference in bicyclic sesquiterpane composition between the crude oil and the source rocks. The result suggests that oil-source correlations based on the bicyclic sesquiterpanes are questionable.     

南海北部琼东南盆地陵水段峡谷沉积建造及勘探意义

琼东南盆地中央峡谷为一大型轴向峡谷体系,具有明显的"分段性"特征,不同区段沉积充填和内部结构均存在明显的差异,其中陵水段位于峡谷西段,具有非常好的储层物性特征,是深水区峡谷勘探的重点区域。为了进一步精细刻画陵水段峡谷内部水道复合体的沉积充填及沉积微相展布特征,本文借助新增加的三维地震资料和新钻井资料,通过峡谷三级层序界面的识别,将峡谷充填划分为3个三级层序SQ1、SQ2和SQ3,并通过古生物有孔虫化石带、钙质超微化石带及井-震结合确定了峡谷底界为中中新世晚期S40界面,陵水段峡谷自西向东依次识别出6种主要的内部充填结构,且将SQ3层序细分为5个次级层序(SSQ1~SSQ5);结合属性特征,精细刻画了陵水段峡谷内沉积微相平面展布及空间演化特征,并指出点砂坝在SSQ1层序最发育,且规模较大,横向上连片分布,将是下步勘探的有利储集体。