Granite weathering and silcrete formation on the Yilgarn Block,Western Australia

Weathering profiles developed on granitic rocks, exposed in the breakaways of the Barr‐Smith Range in the N of the Yilgarn Block of Western Australia, consist of kaolinitic saprolites merging upwards into silcrete, sandstone and grit. The sandstones and silcretes may also form columns or dykes, penetrating downwards into the saprolite. The silcretes are cemented by quartz and anatase, with zircon (QAZ‐cement), and‐the sandstones are cemented by aluminosilicates, either apparently amorphous (as siliceous allophane) or partly crystalline, as kaolinite and opaline silica. Transitional zones between silcretes and sandstones have all cement types. The profiles are characterized by low concentrations of alkalis and alkaline earths and most metals. The QAZ‐silcrete horizons may contain over 3% TiO₂ and 1000 p.p.m. Zr. The profiles evolved through at least four stages: (i) Formation of the deep saprolite‐sand weathering profile by kaolinization of feldspar and mica at depth, and the solution of kaolinite near the top of the profile, causing settling of resistant quartz grains, (ii) Precipitation of QAZ‐cement, the TiO₂ and SiO₂ being derived partly by lateral migration from upslope. (iii) Precipitation of aluminosilicates, in the sandstone and the saprolite. (iv) Erosion and exposure of the profiles by pedimentation. A similar profile occurs further S, at Gabbin, but no QAZ‐silcrete is present and the only exposures are in exploration pits. The kaolinitic saprolite‐quartz sand profiles probably formed under humid conditions, as the equivalents of ferruginous laterite developed on more basic rocks nearby and of lateritic bauxite in the Darling Range. However,’ the sand was a surface horizon and there is no evidence that there was ever a ferruginous zone at these sites. The sequential precipitation of QAZ‐ and aluminosilicate‐cements was probably, a response to increasing aridity and reduced groundwater flow. Aluminosilicate‐cemented materials tend to disaggregrate on exposure but they are probably more abundant than the more prominent QAZ‐silcretes.     

复杂地层钻进中可控复合浆液的研制

复杂地层钻进中常用的注浆材料需要良好的时间可控性和固结体强度,因此研制一种可控时间、增加固结体强度、效果良好的注浆浆液是有意义的。针对以上问题,利用正交试验的方法研制了一种复合注浆材料。在不饱和聚酯中添加水泥及引发剂、促进剂使浆液在要求时间内固化,最终配方的固化时间为62 min,抗压强度为32.6 MPa。该浆液作为化学浆液具有可注性好、浆液粘度低、能注入到细微裂隙中的优点,固结体强度高,并且塑性性能良好,由于在浆液中添加了水泥,降低了成本,较之一些化学浆液有一定的优势。     

水泥混凝土路面病害成因分析及处治方法

水泥混凝土路面使用寿命的长短,除取决于施工质质量外,在很大程度上取决于养护质量。水泥混凝土路面破损一旦发生．破损状况将迅速发展,对行车的舒适性和道路顺畅造成严重影响,养护难度也相应加大。通过六安境内某段一级公路水泥混凝土路面的病害调查,对其形式和成因进行分析,在公路养护中提出了处治病害的具体措施。     

矿渣微细粉掺量对水泥水化产物的影响

利用X射线衍射、TG-DSC综合热分析以及环境扫描电子显微分析技术等,研究了矿渣微细粉对水泥水化产物钙矾石、Ca(OH)₂、CSH凝胶等的影响规律。研究结果表明,在水化早期,矿渣微细粉即参与水泥水化进程,显著影响水泥水化产物钙矾石、Ca(OH)₂和CSH凝胶等的生成速度和生成量及微观形貌,并且随着其掺量增大及水化时间延长,矿渣微细粉参与水泥水化反应程度逐渐提高。     

Study on forward modeling of through-casing resistivity logging

Through-casing resistivity logging (TCRL) is a new kind of logging method for formation evaluation,reservoir monitoring and saturation changes tracking. In this paper,the basic principle of TCRL is de-tailed,and the modified transmission line equation method (MTLEM) is first proposed in China. The MTLEM has been employed to simulate the responses of TCRL,on the basis of which,the effects of formation resistivity,cement and casing on the responses of TCRL are analyzed,and the signals in-duced in different formations are also calculated,which can help the design of TCRL tool and data processing and interpretation in China.     

Dating of Late Pleistocene terrace deposits of the River Rhine using Uranium series and luminescence methods: Potential and limitations

Uranium-series dating of pedogenic carbonate crusts from fluvial gravels is tested using Optically Stimulated Luminescence (OSL) ages as references. OSL dating yielded ages of 30–15 ka and 13–11 ka, which correlate with the cold periods of the Last Glacial Maximum and the Younger Dryas. These ages are internally coherent and consistent with the geological background and are thus regarded as reliable. Most of the U/Th results scatter widely in the ²³⁰Th/²³²Th vs. ²³⁴U/²³²Th isochron diagram, making regression unrealistic. Semiquantitative age estimates from the data were found to be mostly older than the OSL ages and the geological context. It is suggested that a heterogeneous initial ²³⁰Th input, not relatable to a detrital component, is responsible for the observed discrepancies. This input may be due to bacterial activities and Th transport on organic colloids. It appears necessary to avoid samples where bacteria could have contributed to carbonate precipitation. Further, the relative importance of this problem decreases with sample age, so that U/Th dating of sinters is expected to be more reliable in the >100 ka age range.     

京珠高速许漯段路基干拌水泥碎石桩加固研究

干拌水泥碎石桩是一项施工快速、不开挖路基的新型加固技术。针对京珠高速公路许漯段出现大量路基病害,采用此桩型进行加固处理。试验桩长为5.0 m,成孔直径为150 mm,间距为1.0 m×1.0 m,每层虚填料为25 cm,夯距为1.0 m,用120 kg重锤,分别对每层夯实10、8、7击的3根桩进行载荷试验,然后对每层夯实8、7击的2根桩进行重Ⅱ型动力触探试验。根据试验结果对比分析每层夯7击,单桩极限承载力达400 kPa,效果最优。通过地质雷达测试和室内土工试验对比分析加固前后路基土体变化,加固后路基不均匀变形减小,土体有效重度增加,含水率有所减少,桩体的吸水排水效果明显,桩的夯实挤密作用良好,路基的承载力和变形性能得到改善。经过桩加固后1年运行观测,加固后路段没有再次出现翻浆、叽泥等病害,表明此桩型加固高速公路路基效果显著。     

多遍冲击碾压混凝土路面时路基的动力响应分析

采用三维动力弹塑性有限元,考虑冲击压路机沿面板纵向中线及板边行驶来冲击碾压破碎旧水泥混凝土板,对路基在不同冲击遍数下的变形、受力等力学响应进行了分析。研究发现,土基在3个方向均承受压应力,板角荷载作用位置路基竖向变形最大,板中最小。板中路线路基竖向变形总体小于板边路线。随着距冲击点距离减小,土体竖向变形逐渐增大,并存在有明显的波动滞后现象和残余变形。随着冲击遍数的增加,土基最大竖向变形逐渐变大;第3遍冲击完后已出现明显的塑性区;随着冲击遍数的增加,土基中土压力逐渐增大,但渐趋稳定。虽然冲击遍数增加,但土压力增大范围仅限于土基一定深度内。     

水泥加固不同地区软土的试验研究

对不同地区软土经水泥加固后的强度形成特征进行了研究。进行直接剪切试验及无侧限抗压试验测定了水泥加固土的力学指标,发现不同地区的软土经水泥加固后力学性质存在很大差异,从试样的粒度成分、有机质含量及加固后试样的微观结构特征等方面对此进行解释。结果表明,试样的粒度成分及有机质含量会对加固效果产生很大影响,黏粒含量越大,有机质含量越高,对水泥加固土强度的形成越不利。为在用水泥进行不同性质的软土加固处理时采取合理的附加措施提供了理论依据。     

聚苯乙烯轻质混合土物理力学特性的影响因素

通过对聚苯乙烯轻质混合土物理、力学特性的试验,分析了聚苯乙烯轻质混合土中各组成材料及其他因素对其密度和抗压强度的影响。在此基础上,得出影响密度和抗压强度的主要因素,为配置轻质、高强的聚苯乙烯轻质混合土提供科学依据。