Microcrack networks in granite affected by a fault zone: Visualization by confocal laser scanning microscopy

Microcracks in the Cretaceous Ryoke-type granite in Japan were investigated by using deep drilling core samples collected in the Mizunami Underground Research Project of the Japan Nuclear Cycle Development Institute (JNC). The granite body suffered brittle deformation associated with Tertiary thrust movement. Based on core-scale and microscopic deformation features, the drill core from a depth of 300 to 700 m is divided into four domains, i.e. (A) undeformed granite, (B) granite intruded by cataclastic seams, (C) fractured granite in the fault damage zone, and (D) foliated cataclasite at the fault center. To characterize microcrack geometries in each domain, we employed the impregnation method using a low-viscous acrylic resin doped with fluorescent agents and captured the microcrack images by confocal laser scanning microscopy (CLSM). The CLSM image in the fault damage zone revealed anisotropic development of microcrack networks related to the fault movement. Both CLSM observation and porosity measurements reveal a drastic increase of micro-pores in the foliated cataclasite, possibly caused by fragmentation, and granulation and crack sealing in the fault zone.     

旋挖钻进中硬岩及卵砾层钻头结构及施工工艺研究

旋挖钻进技术作为一种高效优质的钻进方法近年来广泛地被用于公路、铁路及大型水电站基础工程施工建设中，取得了良好的社会效益和经济效益。探讨了在卵砾石、漂石等复杂地层以及坚硬基岩中进行旋挖钻进所用钻头的结构及其施工工艺。     

岩土钻掘设备的液压步履机构

因液压步履移位最方便，辅助时间短，换向灵活，移位对孔准确，大型岩土钻掘设备施工的群孔现场实现近距离的自行迁移多采用液压步履机构。详细叙述了双向移动和单向移动加转向步履机构的结构和特点。     

新型充气钻井液在新疆严重漏失地层的应用

利用特殊植物纤维KWS作为泥浆处理剂的新型充气钻井液，不仅具有常规充气钻井液低密度、排粉能力强、节约用水等优点，还可以不受钠、钙离子的影响，提高钻井泡沫稳定性和钻井液抗盐能力。通过采用此种新型充气钻井液，利用其低密度特性、特殊泥饼、泡沫的群体封堵作用和泡沫的疏水屏蔽作用，成功解决了裂隙地层的漏失问题，恢复了钻探生产。在我国西部干旱缺水漏失地区具有良好的应用前景。     

液体高膨胀材料充填堵漏试验应用

介绍了钻探施工中，利用膨胀材料充填、堵漏的新工艺，其具有经济、高效、安全的特点。     

Numerical simulation of percussive drilling

This paper presents a novel dynamical model to analyze the long‐term response of a percussive drilling system. This departs from existing approaches that usually consider a single activation and bit/rock interaction cycle for the analysis of the process performance. The proposed model integrates the axial dynamics of an elastic piston and an elastic drill bit, a motion‐dependent pressure law to drive the piston, and a generalized bit/rock interaction law representative of the dynamic indentation taking place at the bit/rock interface. It applies to down‐the‐hole percussive drilling as well as top‐hole, with minor modifications. The model does not account for the angular motion or the hole cleaning, however. The model is first formulated mathematically; then, a finite‐dimensional approximation is proposed for computations. Numerical analyses of the model response, for a low‐size down‐the‐hole percussive system, follow. The period‐1 stationary response for the reference configuration is studied in detail, and parametric analyses assessing the influence on the rate of penetration of the bit/rock interaction parameters, the feed force, and the percussive activation parameters are conducted. These analyses reveal that the multiscale nature of the process is well captured by the model and recover expected trends for the influence of the parameters. They also suggest that a significant increase of the penetration rate can be achieved by increasing the percussive frequency. Copyright © 2015 John Wiley & Sons, Ltd.     

EXPLORATION ENGINEERING

正20141864 Deng Mengchun(Institute of Exploration Technology,CAGS,Chengdu 611734,China);Huang Shenghui Rock Sample Collection and Division Technologies for Air Reverse Circulation Sampling Drilling(Exploration Engineering,ISSN1672-7428,CN11-5063/TD,40(7),2013,p.73-76,80,16 illus.,5 refs.)     

松辽盆地大陆科钻二开段大井眼钻井液技术

CCSD-SK2井是一口钻穿松辽盆地白垩纪陆相沉积地层的中国大陆科学钻探井。二开段先以216mm口径钻至2806.20m,然后进行444.5mm口径扩孔。泥页岩地层大井眼钻进过程中粘土矿物含量高且易造浆,砂砾岩层渗透性强易粘卡,井壁稳定控制与钻屑携带难度大。选用了钾铵聚合物钻井液体系和聚磺钻井液体系,通过正交实验确定了钻井液配方。将钻井液控制在合适的密度、较低的失水量以及较强的封堵性,有效实现了井壁稳定;保持适当的环空返速、较高的动塑比以及定期打稠塞举砂等措施,有效实现了井眼净化。1086.45m~1147.56m与1182.74m~1256.01m井段累计收获岩心130.90m,取心率达到97.41%,平均机械钻速为0.84m/h;最终顺利钻至2806.20m。     

Research on Formation Mechanisms of Hot Dry Rock Resources in China

As an important geothermal resource, hot dry rock(HDR) reserves have been studied in many countries. HDR resources in China have huge capacity and have become one of the most important resources for the potential replacement of fossil fuels. However, HDR resources are difficult to develop and utilise. Technologies for use with HDR, such as high–temperature drilling, reservoir characterisation, reservoir fracturing, microseismic monitoring and high–temperature power stations, originate from the field of oil and drilling. Addressing how to take advantage of these developed technologies is a key factor in the development of HDR reserves. Based on the thermal crustal structure in China, HDR resources can be divided into four types: high radioactive heat production, sedimentary basin, modern volcano and the inner–plate active tectonic belt. The prospective regions of HDR resources are located in South Tibet, West Yunnan, the southeast coast of China, Bohai Rim, Songliao Basin and Guanzhong Basin. The related essential technologies are relatively mature, and the prospect of HDR power generation is promising. Therefore, analysing the formation mechanisms of HDR resources and promoting the transformation of technological achievements, large–scale development and the utilisation of HDR resources can be achieved in China.     

庐枞LZSD-1孔科学钻孔钻头选择与使用

受中国地质科学院地质研究所的委托,安徽省地质矿产勘查局313地质队承担《华东庐枞盆地科学钻探选址预研究》3000m科学钻探工程任务,该钻孔为大陆科学钻探选址预研究项目中6个钻孔之一,主要目的是通过钻探揭示和验证与成矿有关的岩体、基底、盖层的空间分布,建立地壳结构模型和异常解释的标尺,为大陆万米钻探提供选址依据。本文主要介绍了在施工过程中的钻头选用情况,仅供同行参考。