高能级强夯法处理深厚吹填砂土地基现场试验

沿海吹填砂土地基地下水位较高、常含软土夹层,地基处理难度大。为了研究高能级强夯在这类吹填砂土地基上的加固效果,在山东沿海某吹填砂土场地开展6 000和8 000 kN·m能级强夯加固试验。试验结束后分别运用标准贯入试验、静力触探试验、平板载荷试验进行现场检测。通过对比分析了设计要求深度范围内标准贯入试验和静力触探试验,发现夯前夯后标准贯入试验击数和静力触探锥尖试验阻力均明显提升,有效消除了饱和砂土和饱和粉土的液化势;通过平板载荷试验p-s曲线及夯后静力触探锥尖阻力标准值与承载力特征值的关系式,得到夯后砂土地基承载力特征值≥120 kPa,验证了高能级强夯方案的可行性。其次,对软土夹层位置和地下水位高度展开研究,发现软土层会阻碍夯击能传递,减小强夯有效加固深度,且软土层位置不同对强夯加固效果影响程度不同,强夯影响临界范围处存在软土层时,有效加固深度为软土层顶部位置处;对砂土地基进行4 000 kN·m能级强夯试验时,发现未降水强夯后有效加固深度为5 m,降水至地面以下3 m强夯后有效加固深度达到了7 m,提高了加固效果。在高能级强夯研究基础上,对现场吹填砂土地基进行了75万m²的大面积高能级强夯施工,发现处理后地基能够满足建筑用地要求。     

Froude supercritical flow bedforms in deepwater slope channels? Field examples in conglomerates,sandstones and fine‐grained deposits

Active margin continental slope outcrops from the Eocene Juncal Formation, the Eocene La Jolla Group and the Miocene Capistrano Formation display sedimentary structures and depositional geometries that suggest deposition from Froude supercritical flow, based on comparison to strata produced by flume experiments. These deposits range from boulder‐size soft clasts and cobble‐size hard clasts to silt and mud, and display long‐wavelength and low‐amplitude convex‐up and concave‐up geometries that range from centimetre to hundreds of metres scale, low‐angle foresets and backsets, and common internal and bounding erosion surfaces from centimetres to tens of metres in depth. In places, planar laminations, structureless beds and normally graded beds are laterally or vertically associated with such structures. In other places, consistent backsets or deep and steep‐sided scours occur. This study aimed to discuss the origin of the observed bedforms, contributed to recognition of supercritical flow deposits on continental slopes and expanded the outcrop examples of supercritical flow deposits to silt and mud. This work implies that the erosive and powerful Froude supercritical flow turbidity currents may have a substantial impact on erosional and depositional dynamics on deepwater slopes, especially on active margins due to the steep gradients and high sediment supply.     

MapGIS区文件自动分类填色的快速实现

针对MapGIS软件在拓扑造区中随机填色而导致图件符号化操作烦琐且极易出错的问题,本文在深入分析MapGIS区明码文件逻辑结构的基础上,运用Excel强大的数据编辑处理功能,提出了快速给区块分类填色的简易方法,并结合土地利用现状图数据进行了实验。结果表明,该方法操作简单,易实现,能够快速地解决一些常见的实际问题。     

Sheath fold morphology in simple shear

Sheath folds are highly non-cylindrical structures often associated with shear zones. We investigate the formation of sheath folds around a weak inclusion acting as a slip surface in simple shear by means of an analytical model. We present results for different slip surface orientations and shapes. Cross-sections perpendicular to the shear direction through the sheath fold display closed contours, so called eye-structures. The aspect ratio of the outermost closed contour is strongly dependent on the initial slip surface configuration. The center of the eye-structure is subject to change in height with respect to the upper edge of the outermost closed contour for different cross-sections perpendicular to the shear direction. This results in a large variability in layer thickness across the sheath fold length, questioning the usefulness of eye-structures as shear sense indicators. The location of the center of the eye structure is largely invariant to the initial configurations of the slip surface as well as to strain. The values of the aspect ratios of the closed contours within the eye-pattern are dependent on the strain and the cross-section location. The ratio (R′) of the aspect ratios of the outermost closed contour (R_yz) and the innermost closed contour (R_y′z′) shows values above and below 1. R′ shows dependence on the slip surface shape and orientation but not on the number of involved contours. Using R′ measurements to deduce the bulk strain type may be erroneous.     

Experimental study of the seismic behavior of partially concrete‐filled steel bridge piers under bidirectional dynamic loading

The seismic behavior of steel bridge piers partially filled with concrete under actual earthquake conditions was investigated by using 20 square section specimens subjected to static cyclic loading tests and single‐directional and bidirectional hybrid loading tests. Acceleration records of two horizontal NS and EW directional components for hard (GT1), medium (GT2), and soft grounds (GT3), obtained during the 1995 Kobe earthquake, were adopted in dynamic tests. Experimental results clearly showed that maximum and residual displacements under actual earthquake conditions cannot be accurately estimated by conventional single‐directional loading tests, especially for GT2 and GT3. A modified admissible displacement was proposed on the basis of bidirectional loading test results. The concrete fill can effectively improve the seismic resistance performance if the concrete inside the steel bridge piers is sufficiently high in quantity. Copyright © 2013 John Wiley & Sons, Ltd.     

对某钢厂建设中边坡支护问题的研究

利用修整斜山坡场地的边坡支护的实践经验,研究了扶壁式＋预应力锚杆挡墙、板式锚杆挡墙、格构式锚杆挡墙和岩石锚喷支护方式在边坡支护中的应用,可为以后类似工程的设计与施工提供参考依据。     

基于模型试验的海洋核动力平台定位系统解脱作业关键指标分析

海洋核动力平台定位系统采用软刚臂单点系泊方式,属于多铰连接的单点系泊装置。定位系统在长期海上运营过程中,会面临结构维护、改造、更换等作业,解脱作业的安全性是定位系统乃至核动力平台安全的重要组成。借鉴国内外海洋石油平台解脱作业的成功案例,首先给出了核动力平台定位系统解脱作业的流程,并结合解脱作业故障树的风险传递路径给出关键风险指标;然后基于相似理论搭建了定位系统1∶9缩尺比模型试验平台,真实模拟了定位系统全流程解脱作业,验证了定位系统解脱作业的可行性与有效性;基于实时测量数据分析提升缆绳在限位状态与解脱作业时的张力响应、法兰解脱时系泊腿下部万向节振动响应、系泊刚臂下放姿态等关键指标。研究结果表明物理试验模拟方法可以准确表征解脱作业过程的关键节点,并为量化作业指标、优化作业流程提供数据支持,同时相关试验分析方法可以为其他海洋装备的解脱、安装等提供参考。     

井场边坡稳定性评价及工程处治方案

乐山市境内某井场平整形成填方边坡.边坡坡脚井场污水池开挖中,临空面和边坡支挡工程均出现变形破坏.根据变形破坏的分布规律,从场地地形、建筑物分布、边坡特征和原始坡体物质结构方面,分析该边坡变形机理,评价其稳定性影响因素.并采用极限平衡法对边坡的稳定性及下滑推力进行计算.在此基础上,针对性地提出该边坡的工程处治方案,保证后期井场及污水池的作业安全.     

新型快速锚固锚索的研发及应用

介绍了直立高填方区边坡治理工程中应用的一种新型的快速锚固技术———预应力混凝土管水平向快速锚固锚索的研发过程,阐述了其力学原理及其构造、特性,并结合工程实例,介绍了新型快速锚固锚索的实施过程及技术要点。     

Effects of Vegetation Restoration on Soil Physical Properties in the Wind–Water Erosion Region of the Northern Loess Plateau of China

In the northern Loess Plateau that has been severely affected by wind–water erosion, shifts from arable land to forest or grasslands have been promoted since 1998, using both native and introduced vegetation. However, there is little knowledge of the ecological consequences and effectiveness of the vegetation restoration in the region. Therefore, relationships between watershed‐scale soil physical properties and plant recovery processes were analyzed. The results show that soil physical properties such as bulk density, hydraulic conductivity, mean weight diameter, and the stability of >1 mm macro‐aggregates have been significantly ameliorated in the 0–20 cm soil layer under secondary natural grasslands. In contrast, re‐vegetation with introduced species such as Caragana korshinskii or Medicago sativa had adversely affected the soil physical properties, probably due to the deterioration of soil water conditions and lower organic matter inputs resulting from severe erosion. Reductions in bulk density and increases in saturated hydraulic conductivity could be used as indicators of soil structure amelioration since they are closely related to most other measured properties. Practical considerations for future re‐vegetation projects are suggested, particularly that native species with lower water consumption rates than the introduced species should be used to avoid further soil degradation.