Gas generation and expulsion characteristics of Middle–Upper Triassic source rocks,eastern Kuqa Depression,Tarim Basin,China: implications for shale gas resource potential

Frontier exploration in the Kuqa Depression, western China, has identified the continuous tight-sand gas accumulation in the Lower Cretaceous and Lower Jurassic as a major unconventional gas pool. However, assessment of the shale gas resource in the Kuqa Depression is new. The shale succession in the Middle–Upper Triassic comprises the Taliqike Formation (T₃t), the Huangshanjie Formation (T₃h) and the middle–upper Karamay Formation (T_2–3k), with an average accumulated thickness of 260 m. The high-quality shale is dominated by type III kerogen with high maturity and an average original total organic carbon (TOC) of about 2.68 wt%. An improved hydrocarbon generation and expulsion model was applied to this self-contained source–reservoir system to reveal the gas generation and expulsion (intensity, efficiency and volume) characteristics of Middle–Upper Triassic source rocks. The maximum volume of shale gas in the source rocks was obtained by determining the difference between generation and expulsion volumes. The results indicate that source rocks reached the hydrocarbon expulsion threshold of 1.1% VR and the hydrocarbon generation and expulsion reached their peak at 1.0% VR and 1.28% VR, with the maximum rate of 56 mg HC/0.1% TOC and 62.8 mg HC/0.1% TOC, respectively. The volumes of gas generation and expulsion from Middle–Upper Triassic source rocks were 12.02 × 10¹² m³ and 5.98 × 10¹² m³, respectively, with the residual volume of 6.04 × 10¹² m³, giving an average gas expulsion efficiency of 44.38% and retention efficiency of 55.62%. Based on the gas generation and expulsion characteristics, the predicted shale gas potential volume is 6.04 × 10¹² m³, indicating a significant shale gas resource in the Middle–Upper Triassic in the eastern Kuqa Depression.     

A laboratory study of the self sealing behaviour of a compacted sand–bentonite mixture

Bricks made of compacted sand–bentonite mixture are considered as a possible engineered barrier to isolate high-level radioactive waste at great depth. This work is aimed at investigating some specific effects related to the presence of discontinuities at the contact between the bricks and the excavation wall. In order to do this, an experimental device was developed in the laboratory. The model is made up of a specially designed infiltration cylinder which allows the precise definition of a planar discontinuity between the compacted specimen (a sand–bentonite mixture made up of sand and Kunigel clay from Japan) and a metal wall. During hydration and subsequent specimen swelling, the planar wall is filled, resulting in a healing process. Three total pressure gauges placed along the wall allow a detailed observation of the increase in total stress against the wall. After different periods of swelling, the maximum resistance of the specimen–wall interface to pressure was tested by imposing a pressure increase through a porous stone placed at one end of the cylinder. It was found that the maximum pressure supported by the interface is a function of the initial thickness of the discontinuity and the initial density of the specimen. It was also found that the maximum sustainable pressure depends linearly on the elapsed time. These results are of interest for optimizing water infiltration procedures in either mock-up tests or real disposal systems. If the maximum sustainable pressure at the interface is known, it is possible either to ensure homogeneous hydration of a mass of bricks by respecting the maximum injection pressure limit or to accelerate hydration by forcing water paths along the discontinuities.     

Buckling behaviour of single pile and pile bent in the Scotch Road Bridge

The buckling behaviour of the 360 × 152 steel H-piles supporting the integral abutments of the Scotch Road Bridge, located in Trenton, New Jersey, has been studied for the cases of single pile and pile bent. Three-dimensional finite-element models for single pile and pile bent have been developed to study the behaviour of these fully embedded piles under axial and lateral loading. An iterative analysis based on extracting the eigenvalues and eigenvectors (mode shapes) that correspond to the pile(s) critical buckling loads has been adopted. The pile(s) and the surrounding sand were modelled using solid continuum elements in the finite-element model. Material non-linearity is accounted for in both the piles and the soil in the base state of the model. A parametric study has been utilized to determine the effect of the geometric and material properties of the pile and the surrounding sand on the predicted critical buckling loads of the piles. The effects of four parameters have been studied: soil stiffness, pile length, type of connection, and combining vertical and lateral loads. The results from the parametric study showed that the variation of the percentage change in the sand stiffness, pile length, and combining vertical and lateral loads with the critical buckling loads of the 360 × 152 H-piles is nonlinear. Furthermore, the parameters studied are more influential in affecting the critical buckling load of a single pile than a pile bent, with the exception of the ‘type of connection’ parameter.     

Geochronological and geochemical evidence for a Late Ordovician to Silurian arc-back-arc system in the northern Great Xing'an Range,NE China

The early Paleozoic tectonic evolution of the Xing'an-Mongolian Orogenic Belt is dominated by two oceanic basins on the northwestern and southeastern sides of the Xing'an Block,i.e.,the Xinlin-Xiguitu Ocean and the Nenjiang Ocean.However,the early development of the Nenjiang Ocean remains unclear.Here,we present zircon U-Pb geochronology and whole-rock elemental and Sr-Nd isotopic data on the gabbros in the Xinglong area together with andesitic tuffs and basalts in the Duobaoshan area.LA-ICP-MS zircon U-Pb dating of gabbros and andesitic tuffs yielded crystallization ages of 443-436 Ma and 452-451 Ma,respectively.The Early Silurian Xinglong gabbros show calc-alkaline and E-MORB affinities but they are enriched in LILEs,and depleted in HFSEs,with relatively low U/Th ratios of 0.18-0.36 andεNd(t)values of-1.6 to+0.5.These geochemical features suggest that the gabbros might originate from a mantle wedge modified by pelagic sediment-derived melts,consistent with a back-arc basin setting.By contrast,the andesitic tuffs are characterized by high MgO(>5 wt.%),Cr(138-200 ppm),and Ni(65-110 ppm)contents,and can be termed as high-Mg andesites.Their low Sr/Y ratios of 15.98-17.15 and U/Th values of 0.24-0.25 and moderate(La/Sm)_n values of 3.07-3.26 are similar to those from the Setouchi Volcanic Belt(SW Japan),and are thought to be derived from partial melting of subducted sediments,and subsequent melt-mantle interaction.The Duobaoshan basalts have high Nb(8.44-10.30 ppm)and TiO2 contents(1.17-1.60 wt.%),typical of Nb-enriched basalts.They are slightly younger than regional adakitic rocks and have positiveεNd(t)values of+5.2 to+5.7 and are interpreted to be generated by partial melting of a depleted mantle source metasomatized by earlier adakitic melts.Synthesized with coeval arc-related igneous rocks from the southeastern Xing'an Block,we propose that the Duobaoshan high-Mg andesitic tuffs and Nbenriched basalts are parts of the Late Ordovician and Silurian Sonid Zuoqi-Duobaoshan arc belt,and they were formed by the northwestern subduction of the Nenjiang Ocean.Such a subduction beneath the integrated Xing'an-Erguna Block also gave rise to the East Ujimqin-Xinglong igneous belt in a continental back-arc basin setting.Our new data support an early Paleozoic arc-back-arc model in the northern Great Xing'an Range.     

Inverse modeling of lichen growth curves and implications for lichenometric dating

Lichenometric dating represents a quick and affordable surface exposure dating method that has been widely used to provide a minimum age constraint on tectonic and geomorphic landscape changes as well as buildings and anthropogenic landscape changes in various settings during the late Holocene. Despite its widespread usage, this method has several limitations. Major problems relate to the sampling of lichen population on any given rock surface and the modeling of growth curves. In order to overcome these issues, it has been suggested to subdivide the rock surface into some areas and measure the largest lichen thallus on each one. However, how to express the data in terms of a probability distribution function and link it to an age of last exposure of the rock surface are still a matter of debate. Here, we propose a novel approach to the modeling of lichen growth curves by treating lichen growth as a continuous-time Markov process with a time-varying rate and additive Brownian noise. Given the growth rates, the probability distribution of the lichen population at any time can then be obtained by solving the Fokker–Planck equation. This method is illustrated using a dataset from the Huashan area of eastern China, which consists of measurements of the largest thalli on 12 rock surfaces of known age. We first build up the probability distribution of the lichen population for each rock surface based on extreme value theory and then use these to optimize the growth curve by minimizing the Jensen–Shannon divergence. A new method is also proposed to use the growth curve to map a sample of size data from an undated rock surface to the calendar age domain so as to yield a fully probabilistic estimate of the exposure age of the undated rock surface rather than a point estimate.     

The Proterozoic evolution of northern Siberian Craton margin: a comparison of U–Pb–Hf signatures from sedimentary units of the Taimyr orogenic belt and the Siberian platform

Identifying the cratonic affinity of Neoproterozoic crust that surrounds the northern margin of the Siberian Craton (SC) is critical for determining its tectonic evolution and placing the Craton in Neoproterozoic supercontinental reconstructions. Integration of new U–Pb–Hf detrital zircon data with regional geological constraints indicates that distinct Neoproterozoic arc-related magmatic belts can be identified within the Taimyr orogen. Sedimentary rocks derived from 970 to 800 Ma arc-related suites reveal abundant Archean and Paleoproterozoic detritus, characteristic of the SC. The 720–600 Ma arc-related zircon population from the younger Cambrian sedimentary rocks is also complemented by an exotic juvenile Mesoproterozoic zircon population and erosional products of older arc-related suites. Nonetheless, numerous evidences imply that both arcs broadly reworked Siberian basement components. We suggest that the early Neoproterozoic (ca. 970–800 Ma) arc system of the Taimyr orogen evolved on the active margin of the SC and probably extended along the periphery of Rodinia into Valhalla orogen of NE Laurentia. We also suggest the late Neoproterozoic (750–550 Ma) arc system could have been part of the Timanian orogen, which linked Siberia and Baltica at the Precambrian/Phanerozoic transition.     

Tectonic cycles of the New England Orogen,eastern Australia: A Review

The New England Orogen (NEO), the youngest of the orogens of the Tasmanides of eastern Australia, is defined by two main cycles of compression–extension. The compression component involves thrust tectonics and advance of the arc towards the continental plate, while extension is characterised by rifting, basin formation, thermal relaxation and retreat of the arc towards the oceanic plate. A compilation of 623 records of U–Pb zircon geochronology rock ages from Geoscience Australia, the geological surveys of Queensland and New South Wales and other published research throughout the orogen, has helped to clarify its complex tectonic history. This contribution focuses on the entire NEO and is aimed at those who are unfamiliar with the details of the orogen and who could benefit from a summary of current knowledge. It aims to fill a gap in recent literature between broad-scale overviews of the orogen incorporated as part of wider research on the Tasmanides and detailed studies usually specific to either the northern or southern parts of the orogen. Within the two main cycles of compression–extension, six accepted and distinct tectonic phases are defined and reviewed. Maps of geological processes active during each phase reveal the centres of activity during each tectonic phase, and the range in U–Pb zircon ages highlights the degree of diachronicity along the length of the NEO. In addition, remnants of the early Permian offshore arc formed during extensive slab rollback, are identified by the available geochronology. Estimates of the beginning of the Hunter-Bowen phase of compression, generally thought to commence around 265?Ma are complicated by the presence of extensional-type magmatism in eastern Queensland that occurred between 270 and 260?Ma.     

Biostratigraphy and facies analysis of the Upper Cretaceous–Danian? platform carbonate succession in the Kuyucak area,western Central Taurides,S Turkey

The Upper Cretaceous succession outcropping in the Anamas–Akseki Autochton, consists of approximately 500 m thick purely platform carbonate sediments. It begins with Cenomanian limestones intercalated with limestone breccias (Unit-1) containing mainly Pseudorhapydionina dubia, Pseudonummoloculina heimi, Spiroloculina cretacea (Assemblage I) and unconformably overlies the Lower Cretaceous (Barremian–Aptian) limestones with Vercorsella laurentii, Praechrysalidina infracretacea and Salpingoporella hasi. The Cenomanian limestones include foraminiferal packstone–wackestone, peloidal packstone–wackestone and mudstone microfacies deposited in restricted platform conditions. The Cenomanian succession is truncated by an unconformity characterised by locale bauxite deposits. Immediately above the unconformable surface, dolomitic limestones and rudistid limestones (Unit-2) are assigned to the upper Campanian based on the benthic foraminiferal assemblage (Assemblage II) comprising mainly Murciella gr. cuvillieri, Pseudocyclammina sphaeroidea, Accordiella conica, Scandonea samnitica and Fleuryana adriatica (smaller-sized populations). The upper Campanian limestones composed of dominantly foraminiferal-microbial packstone–wackestone microfacies deposited in shallow water environment with low energy, restricted circulation. The following limestones of the Unit-2 is characterised by sporadic intercalation of “open shelf” Orbitoides, Omphalocyclus, Siderolites assemblage (Assemblage III), assigned to the Maastrichtian, in addition to pre-existing “restricted platform” species. In the upper part of this biozone, the Rhapydionina liburnica/Fleuryana adriatica concurrent range subzone (Assemblage IIIb) is distinguished by the presence of Valvulina aff. triangularis, Loftusia minor as well as the nominal species. The Maastrichtian limestones with sporadically open marine influence consist of bioclastic (rudist-bearing) packstone–floatstone, foraminiferal packstone–wackestone with rudist fragments and peloidal/intraclastic packstone–wackestone microfacies deposited in shallow subtidal–subtidal (lagoonal) environments. The Upper Cretaceous succession passes upwardly into 70 m thick limestones and clayey limestones (Unit-3) which do not contain rudists and pre-existing foraminiferal assemblage with one exception Valvulina aff. triangularis. Variable amounts of ostracoda, discorbids, miliolids, dasycladacean algae and Stomatorbina sp. (Assemblage IV) occur into mud-rich microfacies suggesting restricted conditions with low water energy. A probable Danian age is proposed for the Unit-3 based on the occurrence of Valvulina aff. triangularis and Stomatorbina sp. which were previously recorded from Danian of peri-Tethyan platforms.     

Importance of hydrogeological conditions during formation of the karstic bauxite deposits,Central Guizhou Province,Southwest China: A case study at Lindai deposit

Karstic bauxite deposits are widespread in Central Guizhou Province, SW China, and high-grade ores are frequently sandwiched with overlying coal and underlying iron-rich layers and form a special “coal–bauxite–iron” structure. The Lindai deposit, which is one of the most representative karstic bauxite deposits in Central Guizhou Province, was selected as a case study. Based on textural features and iron abundances, bauxite ores in the Lindai deposit are divided into three types of ores, i.e., clastic, compact, and high-iron. The bauxite ores primarily comprise diaspore, boehmite, kaolinite, illite, and hematite with minor quartz, smectite, pyrite, zircon, rutile, anatase, and feldspar. The Al₂O₃ (53–76.8 wt.%) is the main chemical contents of the bauxite ore samples in the Lindai district, followed by SiO₂, Fe₂O₃, TiO₂, CaO, MgO, S, and P etc. Our geological data on the Lindai deposit indicated that the ore-bearing rock series and its underlying stratum have similar rare earth elements distribution pattern and similar Y/Ho, Zr/Hf, and Eu/Eu¹ values; additionally, all ore-bearing rock samples are rich in MgO (range from 0.16 wt.% to 0.68 wt.%), and the plots of the dolomites and laterites lie almost on or close to the weathering line fit by the Al-bearing rocks in Zr vs. Hf and Nb vs. Ta diagrams; suggesting that the underlying Middle Cambrian Shilengshui Formation dolomite is the parent rock of bauxite resources in the Lindai district.Simulated weathering experiments on the modern laterite from the Shilengshui Formation dolomite in the Lindai bauxite deposit show that hydrogeological conditions are important for karstic bauxite formation: Si is most likely to migrate, its migration rate is several magnitudes higher than those of Al and Fe under natural conditions; the reducing inorganic acid condition is the most conducive to Al enrichment and Si removal; Fe does not migrate easily in groundwater, Al enrichment and Fe removal can occur only in acidic and reducing conditions with the presence of organic matter.The geological and experimental studies show that “coal–bauxite–iron” structure in Lindai deposit is formed under certain hydrogeological conditions, i.e., since lateritic bauxite or Al-rich laterite deposited upon the semi-closed karst depressions, Si can be continuously removed out under neutral/acidic groundwater conditions; the coal/carbonaceous rock overlying the bauxitic materials were easily oxidized to produce acidic (H₂S, H₂SO₄, etc.) and reductant groundwater with organic materials that percolated downward, resulting in enrichment of Al in underlying bauxite; it also reduced Fe³⁺ to its easily migrating form Fe²⁺, moving downward to near the basal carbonate culminated in precipitating of ferruginous (FeS₂, FeCO₃, etc.) strata of the “coal–bauxite–iron” structure. Thus, the bauxitic materials experienced Al enrichment and Si and Fe removal under above certain hydrogeological conditions forming the high-quality bauxite.