Provenance of the Langjiexue Group to the south of the Yarlung-Tsangpo Suture Zone in southeastern Tibet: Insights on the evolution of the Neo-Tethys Ocean in the Late Triassic

ABSTRACT

The Upper Triassic Langjiexue Group, which lies immediately south of the Yarlung-Tsangpo Suture Zone in the Shannan area of southeastern Tibet, represents an important part of the Tethyan Himalayan Sequence (THS). Its provenance and palaeogeography have been the subject of debate. We present new data on petrographic composition, whole-rock geochemistry, and detrital zircon U–Pb geochronology to constrain the provenance of the Langjiexue Group. The dominance of quartz grains and felsic volcanic lithic fragments suggests that the sandstones are litho-quartzose. The trace element geochemical signatures (V–Ni–Th*10, Co/Th–La/Sc, Eu/Eu*–Th/Sc) suggest derivation from felsic igneous sources. The detrital zircon age spectra display three major peaks: a Meso-to-Neoproterozoic peak (1200–900 Ma, 7–18%), a Neoproterozoic-to-Late Cambrian peak (750–500 Ma, 32–65%), and a Late Carboniferous-to-Late Triassic peak (300–200 Ma, 11–33%). The maximum depositional age of early Carnian (236–235 Ma) is obtained by calculating weighted average ages of the youngest zircons (≤250 Ma). The youngest age cluster (300–200 Ma) is incompatible with sources from neighbouring terranes, including the South Qiangtang terrane, Lhasa terrane, THS, and Higher Himalayan Crystalline. Correlations of the Permian–Triassic zircons with those of time-equivalent strata in northwest Australia, west Burma, and the Banda Arc unveil a potential connection to the Tasmanides along the convergent margin of eastern Australia. The New England Orogen (300–230 Ma) could have supplied the Langjiexue Group with magmatic materials via continent-scale drainage systems or a submarine fan complex. This scenario provides a new perspective into the transport of detritus from distal orogens to sedimentary basins thousands of kilometres away.     

Late Oligocene–Early Miocene palaeoecology based on pollen data from the Kalkım-Gönen Basin (Northwest Turkey)

Radiometric and palynological data of the Upper Oligocene–Lower Miocene Soma Formation from the Kalk?m-Gönen Basin yield new results related to age and palynological contents. In this study, Upper Oligocene strata from the Dani?ment and Linfa areas and Lower Miocene strata from the Bengiler area were sampled palynologically and for radiometric dating. The Dani?ment assemblage, which is older than the Linfa assemblages, mainly contains coniferous and evergreen to deciduous mixed mesophytic forest elements. Relatively high quantities of the altitudinal plants Picea and Abies, indicate a cooler palaeoclimate. The Linfa associations mainly include coniferous and riparian elements. Pollen of the riparian plant Alnus and Taxodiaceae indicative for the swamp forest community was predominant, probably as a result of a high lake level. There is a hiatus during the Oligocene–Miocene transition, probably showing a non-depositional phase and sea-level fall indicating the Mi-1 glaciation event. Higher in the sequence, the Aquitanian Bengiler sediments include high amounts of coniferous forest elements as well as components indicative for the evergreen and deciduous mesophytic forest and also riparian forest and swamp forest. Due to presence of thermophilous taxa Reveesia, Mastixiaceae and Arecaceae, a warm and humid palaeoclimate is inferred according to quantitative analyses using the Coexistence Approach.     

Detrital iron-ore deposits in the Iron Ore Group of rocks,northern Orissa,eastern India

Detrital iron deposits (DID) are located adjacent to the Precambrian bedded iron deposit (BID) of Joda near the eastern limb of the horseshoe-shaped synclinorium, in the Bonai–Keonjhar belt of Orissa. The detrital ores overlie the Dhanjori Group sandstone as two isolated orebodies (Chamakpur and Inganjharan) near the eastern and western banks of the Baitarani River, respectively. The DID occur as pebble/cobble conglomerates containing iron-rich clasts cemented by goethite. Mineralogy, chemistry and lamination of these clasts are similar to that found in the nearby BID ores. Enrichment of trace and rare-earth elements in the DID relative to the BID is attributed to their concentration during the precipitation of cementing material. The detrital iron orebodies formed when Proterozoic weathering processes eroded pre-existing BID outcrops located on the Joda Ranges, and the resulting detritus accumulated in the paleochannels. In situ dissolution in association with abundant organic material produced Fe-saturated groundwater, which re-precipitated as goethite within the aggraded channel to cement the detritals. Growth of microplaty hematite in the goethite matrix suggests some level of subsequent burial metamorphism.     

Non-Darcian groundwater flow in leaky aquifers

Abstract

A simplified method has been developed for solving leaky aquifer non-Darcian flow hydraulics. The principle of volumetric approach is combined with the confined-aquifer, time-dependent drawdown equation in an observation well. The groundwater flow in the leaky aquifer is assumed to obey a non-Darcian flow law of exponential type. The results are obtained in the form of type-curve expressions from which the necessary bundles of curves are drawn for a set of selective non-Darcian flow aquifer parameters. Although application of the methodology appears as rather limited but it provides a scientific contribution and extension of leaky aquifer theory towards nonlinear flow conditions. The methodology developed herein is applied to some actual field data from the eastern sedimentary basin in the Kingdom of Saudi Arabia.     

Application of an improved semi-Lagrangian procedure to fully-nonlinear simulation of sloshing in non-wall-sided tanks

The semi-Lagrangian procedure is widely used for updating the fully-nonlinear free surface in the time domain. However, this procedure is only available to cases when the body surface is vertical near the waterline. Present study introduces an improved semi-Lagrangian procedure which removes this ‘vertical-wall’ limitation. Coupling with the boundary element method, the improved semi-Lagrangian procedure is applied to the simulation of fully-nonlinear sloshing waves in non-wall-sided tanks. From the result comparison with the open source CFD software OpenFOAM, it is confirmed that this numerical scheme could guarantee a sufficient accuracy. Further series studies on 2D and 3D fully-nonlinear sloshing waves in wedged tanks are performed. Featured phenomena are observed which are distinct from those in wall-sided tanks.     

Calculation and analysis of negative skin of monopile applied for offshore wind turbine

Monopiles are considered to be as a kind of viable foundation types for offshore wind turbines. The effect of negative skin friction on pile foundation is always an important problem. There are very important theoretical and practical significance to study the distribution law of negative skin friction and the calculation method. Based on the special stratum, the stress and strain of the monopile and soil are simplified, and the improved Kezdi’s double-broken-line model is adopted. The analytical solution of negative skin friction of monopile is deduced according to the degree of skin friction. An engineering case was analyzed by the method, and the calculated results agree well with the measured data. The calculation method proposed can accurately describe the range of the monopile skin frictional distribution and the position of the neutral point, and it is simple and convenient to calculate, that is also a feasible method for calculating the negative skin friction of monopile of offshore wind turbines in practical engineering.     

Experimental research on the mechanical properties of methane hydrate-bearing sediments during hydrate dissociation

This paper describes studies of the effect of hydrate dissociation on the safety and stability of methane hydrate-bearing sediments. Methane hydrates within the sediments were dissociating under the conditions of a confining pressure of 0.5 MPa, 1 MPa, 2 MPa and a temperature of −5 °C. After 6 h, 24 h, or 48 h, a series of triaxial compression tests on methane hydrate-bearing sediments were performed. The tests of ice-clay and sediments without hydrate dissociation were performed for comparison. Focusing on the mechanical properties of the sediments, the experimental results indicated that the shear strength of the ice-clay mixtures was lower than that of the methane hydrate-bearing sediments. The strength of the sediments was reduced by hydrate dissociation, and the strength tended to decrease further at the lower confining pressures. The secant modulus E_S of the sediments dropped by 42.6% in the case of the dissociation time of the hydrate of 48 h at the confining pressure of 1 MPa; however, the decline of the initial yield modulus E₀ was only 9.34%. The slower hydrate dissociation rate contributed to reducing the failure strength at a declining pace. Based on the Mohr–Coulomb strength theory, it was concluded that the decrease in strength was mainly affected by the cohesive reduction. Moreover, the mathematical expression of the M–C criterion related to the hydrate dissociation time was proposed. This research could be valuable for the safety and stability of hydrate deposits in a permafrost region.     

Zircon U–Pb and pyrite Re–Os age constraints on pyrite mineralization in the Yinjiagou deposit,China

We report new zircon U–Pb and pyrite Re–Os geochronological studies of the Yinjiagou poly-metallic deposit, sited along the southern margin of the North China Craton (SMNCC). In this deposit, pyrite, the most important economic mineral, is intergrown/associated with Mo, Cu, Au, Pb, Zn, and Ag. Prior to our new work, the age of chalcopyrite–pyrite mineralization was known only from its spatial relationship with molybdenite mineralization and with intrusions of known ages. The U–Pb and Re–Os isotope systems provide an excellent means of dating the mineralization itself and additionally place constraints on the ore genesis and metal source. Zircons separated from the quartz–chalcopyrite–pyrite veins include both detrital and magmatic groups. The magmatic zircons confine the maximum age of chalcopyrite–pyrite mineralization to 142.0 ± 1.5 Ma. The Re–Os results yield an age of 141.1 ± 1.1 Ma, which represents the age of the chalcopyrite–pyrite mineralization quite well. The common Os contents are notably low (0.5–20.1 ppt) in all samples. In contrast, the Re contents vary considerably (3.0–199.2 ppb), most likely depending on intensive boiling, which resulted in an increase of Re within the pyrite. This study demonstrates that the main chalcopyrite–pyrite mineralization occurred late in the magmatic history and was linked to a deeper intrusion involving dominant mantle-derived materials. This mineralization event might be related to the Early Cretaceous lithospheric destruction and thinning of the SMNCC.     

Genetic and ore-forming ages of the Fe–P–(Ti) oxide deposits associated with mafic–ultramafic–carbonatite complexes in the Kuluketage block,NW China

Abstract

During the past 50 years, many geological and ore-deposit investigations have led to the discovery of the Fe–P–(Ti)-oxide deposits associated with mafic–ultramafic–carbonatite complexes in the Kuluketage block, northeastern Tarim Craton. In this paper, we discuss the genetic and ore-forming ages, tectonic setting, and the genesis of these deposits (Kawuliuke, Qieganbulake and Duosike). LA-ICP-MS zircon U–Pb dating yielded a weighted mean ²⁰⁶Pb/²³⁸U ages of 811?±?5?Ma, 811?±?4?Ma, and 840?±?5?Ma for Kawuliuke ore-bearing pyroxenite, Qieganbulake gabbro and Duosike ore-bearing pyroxenite, respectively. The CL images of the Kawuliuke apatite grains show core–rim structure, suggesting multi-phase crystallisation, whereas the apatite grains from Qieganbulake and Dusike deposits do not show any core–rim texture, suggesting a single-stage crystallisation. LA-ICP-MS apatite ²⁰⁷Pb-corrected U–Pb dating provided weighted mean ²⁰⁶Pb/²³⁸U ages of 814?±?21?Ma and 771?±?8?Ma for the Kawuliuke ores, and 810?±?7?Ma and 841?±?7?Ma for Qieganbulake and Duosike ores, respectively. The core–rim texture in apatite by CL imaging as well as two different ore-forming ages in the core and rim of the apatite indicate two metallogenic events for the Kawuliuke deposit. The first metallogenic period was magmatic in origin, and the second period was hydrothermal in origin. The initial ore-forming age of the Kawuliuke Fe–P–Ti mineralisation was ca 814?Ma and the second one was ca 771?Ma. On the other hand, the ore-forming ages of the Qieganbulake and Duosike deposits were ca 810?Ma and ca 841?Ma, respectively. Qieganbulake and Duosike deposits were of magmatic origin. Combined with previous geochronological data and the research on the tectonic background, we infer that the Kawuliuke, Qieganbulake and Duosike Fe–P–(Ti)-oxide deposits were formed in a subduction-related tectonic setting and were the product of subduction-related magmatism.