3D architecture of Quaternary sediment along the NW Atlantic Moroccan Rharb continental shelf: A stratal pattern under the dual control of tectonics and climatic variations

This study focuses on the evolution of the Atlantic NW Moroccan Rharb continental shelf during the Neogene and Quaternary. This region is part of a foreland basin bounded by the Rif mountain belt and thus provides an interesting geological setting to study the interactions between eustasy and tectonics and the driving mechanisms controlling stratigraphic patterns. The results are supported by an interpretation of new data including high-resolution seismic lines coupled with an interpretation of industrial seismic lines and detailed logs of industrial wells completed by micropaleontologic analysis of cuttings. The stratigraphy reveals a succession of three mega sequences related to the transition from an underfilled to an overfilled stage reflecting the long-term evolution of the foreland system. Moreover, evidence of cyclical sea-level changes are visible in the upper megasequence composed of three depositional sequences assumed to be fourth-order sequences generated in response to the most recent 100-ka glacio–eustatic cycles. This study also shows the peripheral deformation of the Rharb shelf responsible for changes in the geometry of the deposits and thicknesses of the sedimentary fill during the Pliocene and Pleistocene. The most important change was triggered by the uplift of the Lallah Zahra Ridge corresponding to a major Quaternary kinematic boundary and the broad uplift of the southern shelf interpreted as a flexural uplift of the forebulge domain. The deformation-controlled sediment dispersal pattern consists of a progressive growth of the shelf accompanied with a progressive shift of depocenters from the North East to the South West and a general progradation to the North West along the southern border. This progressive filling has led to the confinement of the Rharb paleo-valley across the continental shelf. The complete filling of the palaeo-valley was followed by the development of a more than 70-m thick prodeltaic lobe at the front of the Oued Sebou river mouth during the Holocene.     

Lacustrine basin unconventional resource plays: Key differences

There has been a revival in hydrocarbon source rock characterization and development associated with growing interest in unconventional resources, where these fine-grained organic-rich rocks act as both source and reservoir. To-date, the exploration focus on shale reservoirs has been largely on marine systems. Lacustrine source rocks for conventional resources are geographically important, dominating regions such as China, Indonesia, and Brazil's resource-base. However, they have been generally untested for unconventional resources.There are a number of key differences in the nature of these hydrocarbon systems that should be considered when assessing whether lacustrine systems may represent future unconventional opportunities in areas where the conventional resource-base is dominated by lacustrine-sourced oil. Among the key differences between these depositional systems is the greater sensitivity to high frequency climatic variability within lacustrine systems. Lacustrine systems are highly sensitive to changes in the balance between precipitation and evaporation, which may lead to rapid changes in lake level, potentially exceeding 600 m. These changes in depositional conditions are geologically rapid and may occur over periods of thousands of years. Such changes can reduce the areal extent of potentially thick source rock intervals to only those portions of a basin where a permanent deep lake was present. Thus the core unconventional target area may be geographically limited compared with their marine counterpart. Although potentially areally limited, a review of many lacustrine source rocks suggests that their thicknesses are often significantly greater than marine source rocks. An examination of the more distal portions of lacustrine systems, where better source rock potential is present reveals that there is generally limited connectivity between source and conventional reservoir. In these settings, such as the Wind River basin (Waltman Shale), the hydrocarbons remain trapped within the shales, potentially leading to over-pressured hydrocarbon charged systems. Such conditions suggest that although areally limited, viable unconventional targets may exist, if suitable reservoir conditions are present. Finally, the character of the oils produced is different in these settings, with lacustrine oils being waxy and displaying different hydrocarbon generation and cracking kinetics. High wax oils display distinct flow characteristics, being more viscous, and may offer different production challenges than their non-waxy marine equivalents. Additionally, differences in their cracking kinetics may indicate that the timing of gas generation for shale gas plays may differ significantly from marine systems.     

Evaluating the mechanical compaction of quartzarenites: The importance of sorting (Llanos foreland basin,Colombia)

Mechanical compaction is the main porosity-reducing process in sandstones, including high-reservoir-quality rigid-grain sandstones. For such sandstones, the extrapolation of theoretical or experimental compaction algorithms needs calibration with rocks having well constrained burial histories. Evaluating the compaction of these rocks is achieved by comparing current intergranular volume (IGV) with depositional IGV, which is strongly dependent on sorting. However, because sandstone sorting is difficult to measure accurately, its impact on depositional porosity and compaction state is largely underestimated. We use the quartzarenites of the Oligocene Carbonera Formation in the subsurface of the hydrostatically-pressured Llanos basin to illustrate the importance of sorting when evaluating the compaction of rigid-grain sandstones. IGV and sorting were measured in core samples using a combination of transmitted-light and cathodoluminescence images, resulting in improved accuracy over standard procedures. The compaction state of clean quartzarenites at given depths is best described using IGV-versus-sorting plots, which are used to derive compaction curves for specified sorting values. The IGV-versus-sorting trends are displaced to lower IGV values with increasing burial depth. The differences in IGV caused by differences in sorting exceed the differences in IGV resulting from 1000 m of burial, illustrating the high impact of sorting when evaluating compaction. Contrasting with published experimental results, the compaction of the Llanos basin ductile-grain-poor quartzarenites is independent of grain size, and grain rearrangement is the main compaction mechanism during the first ∼1.6 km of burial. Based on the Llanos data, we have generated IGV-versus-depth curves for clean pure quartzarenites of specific sorting, which can be used to predict their maximum primary porosity up to moderate burial depths. Differences with other published burial curves are probably related to unaccounted variations in sorting, ductile-grain content and framework-strengthening cements. However, the Llanos basin quartzarenites contain virtually no cements, explaining their high degree of compaction relative to other rigid-grain sandstones, and making them ideal to isolate the effects of compaction on the IGV of quartzarenites. The Llanos basin data suggest that, below ∼2.5 km of depth, clean well- to moderately well sorted quartzarenites continue reducing their IGV by mechanical compaction below the 26% limit, which should apply only to extremely well sorted, rigid grain, uncemented sandstones.     

Molecular and isotopic compositions of bitumens in Silurian tar sands from the Tarim Basin,NW China: Characterizing biodegradation and hydrocarbon charging in an old composite basin

Biodegradation and oil mixing in Silurian sandstone reservoirs of the Tarim Basin, one of the largest composite basins in China, were investigated by analyzing the molecular characteristics and stable carbon isotopic signatures of low-molecular-weight (LMW) saturated hydrocarbons and high-molecular-weight (HMW) asphaltenes. Detection of 25-norhopanes and 17-nortricyclic terpanes in most Silurian tar sands from the Tabei Uplift in the Tarim Basin suggests a much greater degree of biodegradation here than in the Tazhong Uplift. This explains the relatively more abundant tricyclic terpanes, gammacerane, pregnane and diasteranes in tar sands from the Tabei Uplift than in those from the Tazhong Uplift. Hence, care must be taken when assigning oil source correlations using biomarkers in tar sands because of the biodegradation and mixing of oils derived from multiple sources in such an old composite basin. Asphaltenes in the tar sands seem to be part of the oil charge before biodegradation, depending on the relative anti-biodegradation characteristics of asphaltenes, the similarity in carbon isotopic signatures for asphaltenes and their pyrolysates, and the consistent product distribution for flash pyrolysis and for regular steranes in asphaltene pyrolysates, regardless of whether the tar sands were charged with fresh oil. According to the relative distributions of regular steranes and the relatively abundant 1,2,3,4-tetramethylbenzene significantly enriched in ¹³C, the oil sources for asphaltenes in the tar sands might be related to lower Paleozoic marine source rocks formed in euxinic conditions. Nevertheless, the relatively low abundance of gammacerane and C₂₈ regular steranes observed in asphaltene pyrolysates and residual hydrocarbons, within limited samples investigated in this work, made a direct correlation of oils originally charged into Silurian tar sands with those Cambrian source rocks, reported so far, seem not to be possible. Comparison of carbon isotopic signatures of n-alkanes in asphaltene pyrolysates with those of LMW saturated hydrocarbons is helpful in determining if the abundant n-alkanes in tar sands are derived from fresh oil charges after biodegradation. The limited carbon isotopic data for n-alkanes in LMW saturated hydrocarbons from the tar sands can be used to classify oils charged after biodegradation in the composite basin into four distinct groups.     

A control-volume finite-element method for three-dimensional multiphase basin modeling

In this paper we describe a 3D control-volume finite-element method to solve numerically the coupled partial differential equations (PDEs) governing geological processes involved in the evolution of sedimentary basins. These processes include sediment deposition and deformation, hydrocarbon generation, multiphase fluid flow, and heat transfer in deforming porous media.     

北部湾盆地涠西南凹陷C洼烃源岩热史及成熟史模拟

北部湾盆地涠西南凹陷C洼流沙港组烃源岩热史及成熟史研究,对C洼深水油气勘探具有指导意义。在恢复涠西南凹陷C洼地史和热史的基础上,利用EASY%Ro模型计算了流沙港组烃源岩的成熟度史。研究结果表明,在涠西南凹陷发展的裂陷阶段初始期热流值较高,最大值约为77mW/m2,其后热流值逐渐减小,现今热流值约为54mW/m2;涠西南凹陷C洼流沙港组烃源岩开始生烃(Ro=0.5%)时间为51MaBP,达到生烃高峰(Ro=1%)时间为42MaBP,达到高成熟演化阶段(Ro=1.3%)时间为17MaBP;对比涠1井流沙港组烃源岩演化特征,处于C洼深水勘探区的流沙港组烃源岩成熟度较高,生烃能力较强,拥有广阔的油气勘探前景。     

Tectonic evolution of the Cape and Karoo basins of South Africa

The Cape and Karoo basins formed within the continental interior of Gondwana. Subsidence resulted from the vertical motion of rigid basement blocks and intervening crustal faults. Each basin episode records a three-stage evolution consisting of crustal uplift, fault-controlled subsidence, and long periods of regional subsidence largely unaccompanied by faulting or erosional truncation. The large-scale episodes of subsidence were probably the result of lithospheric deflection due to subduction-driven mantle flow. The early Paleozoic Cape basin records the combined effects of a north-dipping intra-crustal décollement (a late Neoproterozoic suture) and a right-stepping offset between thick Rio de la Plata craton and Namaqua basement. Following the Saldanian orogeny, a suite of small rift basins and their post-rift drape formed at this releasing stepover. Great thicknesses of quartz sandstone (Ordovician–Silurian) and mudstone (Devonian) accumulation are attributed to subsidence by rheological weakening and mantle flow. In contrast, the Karoo basin is a cratonic cover that mimics the underlying basement blocks. The Permian Ecca and lower Beaufort groups were deposited in a southward-deepening ramp syncline by extensional decoupling on the intra-crustal décollement. Reflection seismic and deep-burial diagenetic studies indicate that the Cape orogeny started in the Early Triassic. Deformation was partitioned into basement-involved strike-slip faults and thin-skinned thrusting. Uplift of the Namaqua basement resulted in erosion of the Beaufort cover. East of the Cape fold belt, contemporaneous subsidence and tilting of the Natal basement created a late Karoo transtensional foreland basin, the Stormberg depocentre. Early Jurassic tectonic resetting and continental flood basalts terminated the Karoo basin.     

构造-岩浆作用对热液活动的控制机理: 马努斯海盆为例

综述了马努斯海盆热液区构造特征、基底差异, 结合马努斯海盆热液区热液活动与构造-岩浆特征, 探讨了二者的耦合关系, 以及构造-岩浆作用对热液活动的影响和控制。马努斯海盆位于西南太平洋俾斯麦海的东北部, 是世界上扩张速度最快的海盆之一。马努斯海盆西部(马努斯扩张中心, Manus Spreading Center, MSC)主要由海盆扩张成熟期产生的大洋中脊玄武岩组成, 属于成熟弧后扩张中心,发育Vienna Woods热液区; 海盆东部(东南裂谷, Southeast Rift, SER)则是一个拉张裂谷, 处于扩张的早期阶段, 属于不成熟弧后扩张中心, 发育PACMANUS、DESMOS、SuSu Knolls三大热液区。MSC与大洋中脊的热液活动相似, 而SER因受到火山、俯冲作用影响更为显著, 其热液流体具有岩浆流体和俯冲流体的特征。与Vienna Woods热液压相比, PACMANUS、DESMOS以及SuSu Knolls三个热液区的水深相对较浅(1 150～1 740 m), 是地球内部热物质由内向外迁移的结果, 其下部岩浆作用强烈。此外,岩浆脱气作用和数值模拟结果表明, PACMANUS热液系统中具有岩浆流体的输入。与Vienna Woods热液区相比, PACMANUS、DESMOS、SuSu Knolls热液区的热液活动强度及流体组成主要受控于岩浆作用。     

下扬子区下古生界油气有利勘探区带探讨

下扬子区下古生界具有良好的油气地质条件,具备形成大型油气藏的物质基础,但一直未获得油气勘探的突破。本文通过地质、地球物理综合解释,结合部分地质露头、钻井资料及上扬子勘探成果,重点对下扬子区下古生界构造地质特征与油气地质条件等开展了综合分析研究。从构造沉积充填角度将下扬子区分为4个二级构造单元,中部地区的无锡-黄山断隆带构造相对稳定,分析认为其西北部的无锡-黄桥低褶带为油气勘探的有利区带,具有形成下古生界弱改造型油气藏的勘探前景。     

New style of honeycomb structures revealed on 3D seismic data indicate widespread diagenesis offshore Great South Basin,New Zealand

In the Great South Basin, within the Eocene section, at time-depths around 700–900 ms two way time below the seafloor, unusual features are observed on 3D seismic data closely associated with polygonal faults. The features, referred to as honeycomb structures (HS), cover an area of ∼600 km², are packed circular, oval, to polygonal depressions 150–400 m across in plan view and several to 10 + m in amplitude. Polygonal faults rapidly die out at the Marshall Paraconformity, which is overlain by the Oligocene Penrod Formation. Hence the polygonal faults are inferred to have formed prior to the Marshall Paraconformity, and they cross-cut HS features. Consequently the top of the HS probably formed at burial depths of around 375–500 m, which is their decompacted depth below the paraconformity. The interval containing HS is about 125 m vertical thick. There are several possible origins for the HS. The most probable is related to bulk contraction of the sediment volume accompanied by fluid expulsion, which suggests a diagenetic origin, in particular the opal-A/CT transition. There are actually two polygonal fault systems (PFS) present in the area. The Southern Tier 1 PFS lies laterally to the HS and overlaps with it. The Northern PFS (Tier 2) lies above the HS, appears to be independent of the HS, and formed in the upper 200–300 m of the sediment column. The Tier 1 PFS probably formed by shear failure related to the same diagenetic effects that caused the HS.