低空急流识别及急流轴自动绘制方法研究

低空急流对强对流天气的预报有重要意义。针对目前低空急流主要由手工绘制,存在效率低、易受主观因素影响的问题,本文基于MICAPS高空全要素填图数据中的探空站风场信息,提出了一种低空急流自动识别及急流轴自动绘制算法。算法从急流轴定义出发,依次从风速、风向、探空站分布、中轴线位置等多个角度对低空急流轴进行检测。经过传递闭包聚类、急流轴关键点提取、不同风向急流轴关键点归并、急流轴平滑等步骤,实现了低空急流自动识别及急流轴的自动绘制。测试表明,在识别的基础上自动绘制的急流轴具有位置准确、形态自然、能完整反映急流水汽输送路径、适应复杂环境低空急流等特点。在291组测试数据中未发现空报,准确击中率达到94.96%。     

Probing fault zone heterogeneity on the Nojima fault: Constraints from zircon fission-track analysis of borehole samples

Fission-track (FT) thermochronologic analysis was performed on zircon separates from rocks in and around the Nojima fault, which was activated during the 1995 Kobe earthquake. Samples were collected from the University Group 500 m (UG-500) borehole and nearby outcrops. FT lengths in zircons from localities > 25 m away from the fault plane as well as one 0.1 m away from the fault in the footwall are characterized by concordant mean values of  10–11 μm and unimodal distributions with negative skewness, which showed no signs of appreciable reduction in FT length. In contrast, those adjacent (< 3 m) to the fault at depths on the hanging wall side showed significantly reduced mean track lengths of  6–8 μm and distributions having a peak around 6–7 μm with rather positive skewness. The former pattern is interpreted to reflect cooling through the zircon partial annealing zone (ZPAZ), without later, partial thermal overprints. The latter indicates substantial track shortening due probably to secondary heating by a thermal event(s) that locally perturbed the geothermal structure. Modeled zircon FT length and age data of partially annealed samples from the UG-500 borehole revealed a cooling episode in the ZPAZ that started at  4 Ma within  3 m from the fault plane, whereas those from the Geological Survey of Japan 750 m borehole record cooling started at  31–38 Ma within  25 m from the fault. On the basis of one-dimensional heat conduction modeling as well as the consistency between the degree of FT annealing and the degree of deformation/alteration of borehole rocks, these cooling ages in both boreholes are interpreted as consequences of ancient thermal overprints by heat transfer or dispersion via fluids in the fault zone. Together with the zircon FT data of a pseudotachylyte layer recently analyzed, it is suggested that the present Nojima fault system was reactivated in the Middle Quaternary from an ancient fault initiated at  56 Ma at mid-crustal depths. Also shown is a temporal/spatial variation in terms of the thermal anomalies recorded in the fault rocks, implying heterogeneity of hot fluid flows in the fault zone.     

腾冲地块西缘那邦基性麻粒岩中石榴石Sm-Nd等时线年龄及其意义

石榴石 Ｓｍ  Ｎｄ 等时线法是近年来常用于较新年龄的测年方法。腾冲地块西缘新近发现的基性麻粒岩中石榴石和全岩的 Ｓｍ  Ｎｄ 等时线年龄为 １７～２５ Ｍａ, 是该麻粒岩经受后期变形变质作用的年龄, 与区内右旋走滑断裂活动时限相一致,为确证腾冲地区的右旋走滑断裂是印支地块逸出的西部边界提供了 Ｓｍ  Ｎｄ 等时线方法的年龄约束。并推断石榴石 Ｓｍ  Ｎｄ 体系的封闭温度较低, 应低于那邦变质基性岩晚期变质作用的６４０℃～７２０℃。     

凹坑地形风流结构对污染物散布的模拟研究

利用建立的三维非静力高分辨率高阶湍流闭合模式与随机游动扩散模式研究了一个深凹露天矿区污染物散布的规律,同时在风洞中进行了示踪实验。结果表明,由于凹坑内复环流结构的存在,使得坑内污染物浓度较大,且浓度最大值出现在源的上风侧。数值试验与风洞试验结果吻合较好。     

井下地震计的P波接收函数正演计算及其稳定性研究——以首都圈地区为例

井下地震计波形记录的P波垂向分量存在频谱极小（spectrum null）现象,导致接收函数的结果不稳定.本文以首都圈地区为例,基于平面波入射的传播矩阵理论,发展了用于计算井下地震计的接收函数正演方法.在此基础上,分析了井下地震计波形垂向分量频谱极小现象,研究其对接收函数稳定性的影响.结果表明,井下地震计波形记录垂向分量的频谱极小开始出现的频率和地震计的埋深相关.该现象可造成反卷积提取的接收函数不稳定,且不稳定情况出现在频谱极小附近的频段,可通过选择合适的高斯因子压制其对接收函数的影响.     

Feasibility of borehole ambient noise interferometry for permanent reservoir monitoring

The analysis of seismic ambient noise acquired during temporary or permanent microseismic monitoring campaigns (e.g., improved/enhanced oil recovery monitoring, surveillance of induced seismicity) is potentially well suited for time‐lapse studies based on seismic interferometry. No additional data acquisition required, ambient noise processing can be automatized to a high degree, and seismic interferometry is very sensitive to small medium changes. Thus there is an opportunity for detection and monitoring of velocity variations in a reservoir at negligible additional cost and effort. Data and results are presented from an ambient noise interferometry study applied to two wells in a producing oil field in Romania. Borehole microseismic monitoring on three component geophones was performed for four weeks, concurrent with a water‐flooding phase for improved oil recovery from a reservoir in ca. 1 km depth. Both low‐frequency (2 Hz–50 Hz) P‐ and S‐waves propagating through the vertical borehole arrays were reconstructed from ambient noise by the virtual source method. The obtained interferograms clearly indicate an origin of the ambient seismic energy from above the arrays, thus suggesting surface activities as sources. It is shown that ambient noise from time periods as short as 30 seconds is sufficient to obtain robust interferograms. Sonic log data confirm that the vertical and horizontal components comprise first arrivals of P‐wave and S‐waves, respectively. The consistency and high quality of the interferograms throughout the entire observation period further indicate that the high‐frequency part (up to 100 Hz) represents the scattered wave field. The temporal variation of apparent velocities based on first‐arrival times partly correlates with the water injection rate and occurrence of microseismic events. It is concluded that borehole ambient noise interferometry in production settings is a potentially useful method for permanent reservoir monitoring due to its high sensitivity and robustness.     

Coal top detection by conductively guided borehole radar wave imaging for open cut blast-hole drilling

Damage to the top of coal seams, caused by incorrect blast stand-off distances, results in coal losses of up to 10–15% to the Australian open cut coal mining operations. This is a serious issue to be addressed. Here we propose to use a new forward-looking imaging technique based on the borehole radar technology to predict the coal seam top in real time while drilling blast holes. This is achieved by coupling the conventional borehole radar waves on to a steel drill rod to induce a guided wave along the axial drill rod. The drill rod ahead of the borehole radar behaves as a forward-looking antenna for the guided waves. Both numerical modelling and field trials simulating a drill rod as an antenna are used to investigate the feasibility of the proposed technique for prediction of the coal top under typical open cut environments. Numerical modelling demonstrated that conductivity of the overburden is the most important factor affecting our ability to see coal seams ahead of the drill bit, the guided borehole radar waves could be used for top coal prediction and a theoretical prediction error less than 10 cm and a forward-looking capability of 4–6 m can be achieved. Field trials at Australian open cut coal mines also demonstrated that guided borehole radar waves can be observed and used for prediction of coal top ahead of drill bit during blast-hole drilling in resistive, open cut environments (the average resistivity should be higher than 75 Ωm).     

Energy of acoustic signals in a borehole

In the present article, the dependencies of the acoustic signal total energy and the energies of the wave packets of different types of the waves on the elastic parameters and permeability of rocks have been studied. We have considered traditional logging tools containing acoustical monopole source. Calculations were performed in a frequency range of dozens of kilohertz, typical for acoustic well logging. It was shown that in a typical high-velocity formation (v_s > v_f, where v_s and v_f are the velocities of the shear wave in the rock and of the compressional wave in the borehole fluid, respectively), the pseudo-Rayleigh waves, whose elastic properties depend mainly on the shear modulus of the rock, contributed significant energy to the total signal energy in the borehole. The energies of different wave packets depend on the permeability in different ways. The greatest sensitivity to permeability change has been shown by the acoustic signal total energy and the energy of the low-velocity part of the pseudo-Rayleigh wave packet. The theoretical analysis was illustrated by real sonic log data.     

滇西北羊拉地区金沙江古洋盆的穿时碰撞闭合：来自花岗岩年龄的制约

金沙江缝合带是特提斯东段重要的缝合带之一,羊拉地区的金沙江缝合带处在青藏高原东构造结东侧,是研究金沙江古洋盆的碰撞闭合过程等构造事件的重要窗口。在前人工作的基础上,通过野外系统观察取样,结合花岗岩侵入体的锆石SHRIMP U-Pb年龄测定结果,对金沙江古洋盆的碰撞闭合过程做初步研究。结果表明,从南部加仁岩体的通吉格花岗闪长岩(加仁岩体之一部分),经中部的路农—里农—江边岩体的花岗闪长岩,到北部的贝吾花岗闪长岩,岩体的侵位年龄分别为通吉格(246.1±3.5) Ma、路农花岗闪长岩(238.1±5.3) Ma、里农花岗闪长岩(239.0±5.7) Ma、江边岗闪长岩(227.9±5.1) Ma和贝吾花岗闪长岩(213.6±6.9) Ma,表明金沙江缝合带的碰撞关闭是从南向北逐渐闭合的,闭合的时限可达33 Ma,但闭合碰撞不是连续而是幕式的,碰撞闭合作用主要发生在约246 Ma、239 Ma、228 Ma、213 Ma 4个幕次。里农大沟还出现222 Ma的辉绿岩脉,与江边岩体时间上较为接近,似乎表明江边岩体侵入时期本区处于局部拉张的构造背景。